Configuring and applying advanced policies is optional. If no advanced policy is explicitly applied to a SAP or IP interface, then no default advanced policy is applied.
To create a new advanced policy, define the following:
a slope policy ID value. The system does not dynamically assign a value.
a description. The description provides a brief overview of policy features.
the child control parameters, which are intended to allow more precise control of the method that hierarchical virtual scheduling employs to emulate the effect of a scheduling context upon a member child queue or policer
The following displays an example of an advanced policy configuration:
ALA-7>config>qos# info
#------------------------------------------
echo "QoS Policies Configuration"
#------------------------------------------
...
adv-config-policy "childPolicy1" create
description "Test"
child-control
offered-measurement
add percent 30
granularity percent 30
exit
bandwidth-distribution
above-offered-cap percent 5
granularity percent 5
exit
exit
exit
...
#------------------------------------------
ALA-7>config>qos#