Dynamic data services identification attributes

This section details the attributes that can be used in a CoA and Disconnect Message to identify Dynamic Data Services associated with a dynamic service data trigger. To identify Dynamic Data Services associated with an Enhanced Subscriber Management (ESM) control channel, the CoA and Disconnect Messages must be sent to the control channel. See section "Subscriber host identification attributes" for attributes that can be used as key.

Table: CoA and Disconnect Message: data triggered dynamic services identification attributes lists the attributes that can be used in a CoA and Disconnect Message to identify one or multiple Dynamic Data Services associated with a dynamic service data trigger.

Table: CoA and Disconnect Message: data triggered dynamic services identification attributes
Attribute ID	Attribute name	Identifies
44	Acct-Session-Id	Accounting session ID of a dynamic services data trigger (can be displayed with "show service dynamic-services data-triggers [sap `sap-id`]"): Identifies a single dynamic service. Modify and Teardown actions are supported in CoA. Only a single dynamic service is deleted with a Disconnect Message. Accounting session ID of a dynamic services sap associated with a dynamic services data trigger (can be displayed with "show service dynamic-services saps summary [sap `sap-id`]"): Identifies a single dynamic service. Modify and Teardown actions are supported in CoA. The identified dynamic service is deleted with a Disconnect Message.
87	NAS-Port-Id	Targets a dynamic services sap-id: Identifies a single dynamic service. Modify and Teardown actions are supported in CoA. The identified dynamic service is deleted with a Disconnect Message. Note - If the `sap-id` corresponds with the `sap-id` of a dynamic services data trigger, then all dynamic data services associated with that data trigger are deleted in case of a Teardown action in CoA or a Disconnect Message.