IP and MAC filter policies are applied by associating them with a SAP or spoke SDP in ingress or egress direction as needed. Filter ID is used to associate an existing filter policy, or if defined, a filter name for that filter policy can be used in the CLI.
The following output displays IP and MAC filters assigned to an ingress and egress SAP and spoke SDP:
A:ALA-48>config>service>epipe# info
----------------------------------------------
sap 1/1/1.1.1 create
ingress
filter ip 10
exit
egress
filter mac 92
exit
exit
spoke-sdp 8:8 create
ingress
filter ip ‟epipe sap default filter”
exit
egress
filter mac 91
exit
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>epipe#
The following output displays an IPv6 filters assigned to an IES service interface:
A:ALA-48>config>service>ies# info
----------------------------------------------
interface "testA" create
address 192.22.1.1/24
sap 2/1/3:0 create
exit
ipv6
ingress
filter ipv6 100
egress
filter ipv6 100
exit
exit
...
----------------------------------------------
A:ALA-48>config>service>ies#