Displaying QoS information associated with routes

The following commands are enhanced to show the forwarding-class and priority associated with the displayed routes:

This feature uses a qos keyword with the show>router>route-table command. When this option is specified, the output includes an additional line per route entry that displays the forwarding class and priority of the route. If a route has no fc and priority information, the third line is blank. The following CLI shows an example:

show router route-table [family] [ip-prefix[/prefix-length]] [longer | exact] [protocol protocol-name] qos

An example output of this command is as follows:

A:Dut-A# show router route-table 10.1.5.0/24 qos
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix                                   Type    Proto    Age         Pref
       Next Hop[Interface Name]                                     Metric
       QoS
-------------------------------------------------------------------------------
10.1.5.0/24                                   Remote  BGP      15h32m52s   0
       PE1_to_PE2                                                   0
       h1, high
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
A:Dut-A#