IPv6 exception filter policy

Use the following CLI syntax to create an IPv6 exception filter policy:

Note:

In the ipv6-exception command, exception-id is equivalent to the ip-exception variable filter-id.

- config>filter# ipv6-exception exception-id[create]
        - description description-string

- config>filter# ipv6-exception 1 create    - config>filter>ipv6-except# description "IPv6-exception"

The following example displays a template IPv6 exception filter policy configuration.

A:domain1>config>filter# info
----------------------------------------------
...
        ipv6-exception 1 create
            description "IPv6-exception"
        exit
...
----------------------------------------------
A:domain1>config>filter#