To display the active subscriber services in the system, use the show service sub-services CLI command. The sub-service-name filter is a longest match.
# show service sub-services [id <service-id>] [sap <sap-id>] [ip <ip-prefix/prefix-length>] [mac <ieee-address>] [pppoe-session-id <pppoe-session-id>] [sub-service-name <sub-service-name>] [sub-service-type <sub-service-type>] [summary|associations]
Sample output:
# show service sub-services
===============================================================================
Subscriber service table
===============================================================================
Username : cpe2@domain1.com
Subscriber : cpe2@domain1.com Type : PPP
SAP : 1/1/4:1201.5 Service : 1000
MAC Address : 00:51:00:00:01:01 PPPoE-SID: 114
IP : 10.1.1.3
Interface-ID : 02:51:00:FF:FE:00:01:01
-------------------------------------------------------------------------------
Service instance : rate-limit;5120;30720
up time : 0d 00:05:23
type : rate-limit
acct sess id : 144DFF00000A2556B757DA
multi sess id : 144DFF00000A1156B71E44
acct type : volume-time
acct ivl : 1d 00:00:00
input octets : 0
input packets : 0
output octets : 0
output packets : 0
actions :
QoS-override
ingress arbiter "root" rate 5120
QoS-override
egress aggregate rate limit 30720
-------------------------------------------------------------------------------
number of subscriber services found: 1
===============================================================================
To display the active PCC rules in the system, use the show service active-subscribers pcc-rule CLI command. A PCC rule can be inactive when, for example, a PCC rule with filter actions on IPv6 flows is activated on an IPv4single-stack PPPoE or IPoE session.
# show service active-subscribers pcc-rule [subscriber <sub-ident-string>] [detail]
Sample output:
# show service active-subscribers pcc-rule subscriber "ipoe-bridged-001" detail
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber ipoe-bridged-001 (sub-profile-1)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:[1/1/4:1201.19] - sla:sla-profile-1
-------------------------------------------------------------------------------
IP Address
MAC Address Session Origin Svc Fwd
-------------------------------------------------------------------------------
2001:db8:1:101::1/128
00:51:00:00:00:05 IPoE DHCP6 1000 Y
-------------------------------------------------------------------------------
Ingr Filter Override : N/A
Egr Filter Override : N/A
Ingr Qos Policy Override : 10:P10
Egr Qos Policy Override : 10:P9
===============================================================================
Precedence Rule Id Rule Name Subscriber Service Name
-------------------------------------------------------------------------------
10 19 rule-1 subsvc_pcc-coa-1
10 20 rule-2 subsvc_pcc-coa-1
===============================================================================
===============================================================================
PCC Rules
===============================================================================
PCC rule name : rule-1
PCC rule id : 19
Monitoring key : -
Flow status : Enabled
Nbr of Flows : 2 (ingress)
HTTP-Redirect : -
Next-Hop Redir. IPv4 : -
Next-Hop Redir. IPv6 : -
QoS Ingr. CIR/PIR : - / 1000 kbps
QoS Egr. CIR/PIR : - / -
FC change : -
Account : Enabled
-------------------------------------------------------------------------------
Flows
-------------------------------------------------------------------------------
Src. IP : any Src. Port: -
Dst. IP : 172.16.1.1/32 Dst. Port: -
Protocol : - DSCP : -
-------------------------------------------------------------------------------
Src. IP : any Src. Port: -
Dst. IP : 2001:db8:aaa:1::1/128 Dst. Port: -
Protocol : - DSCP : -
-------------------------------------------------------------------------------
===============================================================================
PCC rule name : rule-2
PCC rule id : 20
Monitoring key : -
Flow status : Enabled
Nbr of Flows : 2 (egress)
HTTP-Redirect : -
Next-Hop Redir. IPv4 : -
Next-Hop Redir. IPv6 : -
QoS Ingr. CIR/PIR : - / -
QoS Egr. CIR/PIR : - / 5000 kbps
FC change : -
Account : Enabled
-------------------------------------------------------------------------------
Flows
-------------------------------------------------------------------------------
Src. IP : 172.16.1.1/32 Src. Port: -
Dst. IP : any Dst. Port: -
Protocol : - DSCP : -
-------------------------------------------------------------------------------
Src. IP : 2001:db8:aaa:1::1/128 Src. Port: -
Dst. IP : any Dst. Port: -
Protocol : - DSCP : -
-------------------------------------------------------------------------------
===============================================================================
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Use the following alternative command to check the PCC rules in the system:
# show subscriber-mgmt pcc-rule
- pcc-rule
- pcc-rule monitoring-key <key> detail
- pcc-rule rule-id <id> detail
- pcc-rule rule-name <rule-name>
- pcc-rule rule-name <rule-name> detail
- pcc-rule summary
- pcc-rule monitoring-key <key>
<rule-name> : [100 chars max]
<key> : [80 chars max]
<id> : [1..1023]
<detail> : keyword
The statistics of dynamic policers can be displayed with:
# show service active-subscribers subscriber "ipoe-bridged-001" detail
--- snip ---
------------------------------------------------------------------------
SLA Profile Instance per Policer statistics
------------------------------------------------------------------------
Packets Octets
--- snip ---
Ingress Policer 10 (Stats mode: minimal)
used by pcc-rule rule-1
Off. All : 0 0
Dro. All : 0 0
For. All : 0 0
--- snip ---
The details of the cloned QoS and filter policies as a result of PCC rule activation can be displayed with the following show commands:
# show qos sap-ingress 10:P1
# show qos sap-egress 10:P1
# show filter ip 10:P1
# show filter ipv6 "10:P1"