1. Getting started

This chapter provides an overview of this document, includes a summary of changes from the previous release, and lists precautionary messages and command conventions.

1.1. About this document

This document describes how to configure advanced solutions for the Nokia Service Router Linux (SR Linux). Advanced solutions are defined as more complex network-level configurations where additional guidance and more detailed procedures may be required.

This document is intended for network technicians, administrators, operators, service providers, and others who need to understand how to use and configure advanced solutions.

Note:

This manual covers the current release and may also contain some content that will be released in later maintenance loads. Refer to the SR Linux Release Notes for information on features supported in each load.

1.2. What’s new

This following changes were made in this release.

Table 1:  Change summary 

Topic

Location

EVPN-VXLAN L3

EVPN-VXLAN for layer 3

1.3. Precautionary messages

Observe all dangers, warnings, and cautions in this document to avoid injury or equipment damage during installation and maintenance. Follow the safety procedures and guidelines when working with and near electrical equipment.

Table 2 describes information symbols contained in this document.

Table 2:  Information symbols  

Symbol

Meaning

Description

Danger

Warns that incorrect handling and installation could result in bodily injury. An electric shock hazard could exist. Before beginning work on this equipment, be aware of hazards involving electrical circuitry, be familiar with networking environments, and implement accident prevention procedures.

Warning

Warns that incorrect handling and installation could result in equipment damage or loss of data.

Caution

Warns that incorrect handling may reduce component or system performance.

Note

Contains suggestions or additional operational information.

1.4. Conventions

SR Linux documentation uses the following command conventions.

  1. Bold type indicates a command that the user must enter.
  2. Input and output examples are displayed in Courier text.
  3. An open right angle bracket indicates a progression of menu choices or simple command sequence (often selected from a user interface). Example: start > connect to
  4. Angle brackets (< >) indicate an item that is not used verbatim. For example, for the command show ethernet <name>, name should be replaced with the name of the interface.
  5. A vertical bar (|) indicates a mutually exclusive argument.
  6. Square brackets ([ ]) indicate optional elements.
  7. Braces ({ }) indicate a required choice. When braces are contained within square brackets, they indicate a required choice within an optional element.
  8. Italic type indicates a variable.

Generic IP addresses are used in examples. Replace these with the IP addresses used in the system.