network-queue [network-queue-policy-name] [detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays network queue policy information.
Specifies the name of the network queue policy. Allowed values are any string up to 32 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
Specifies each queue’s rates and adaptation-rule and & cbs details. It also shows FC to queue mapping details.
The following output is an example of network queue policy information, and Table: Output fields: network queue policy describes the output fields.
Sample output*A:card-1# show qos network-queue nq1
===============================================================================
QoS Network Queue Policy
-------------------------------------------------------------------------------
Network Queue Policy (nq1)
-------------------------------------------------------------------------------
Policy : nq1
Accounting : packet-based
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Port-id : 1/1/20
===============================================================================
*A:card-1#
*A:card-1>config>qos# show qos network-queue nq1-cbs detail
===============================================================================
QoS Network Queue Policy
-------------------------------------------------------------------------------
Network Queue Policy (nq1-cbs)
-------------------------------------------------------------------------------
Policy : nq1-cbs
Accounting : packet-based
-------------------------------------------------------------------------------
Queue CIR PIR CBS
CIR Rule PIR Rule
-------------------------------------------------------------------------------
1 0 32 8.29
max closest
2 0 100 6.00
closest closest
3 0 100 10.00
closest closest
4 0 100 6.00
closest closest
5 0 100 10.00
closest closest
6 0 4 10.00
closest closest
7 3 93 1.00
closest closest
8 0 3 7.00
closest closest
-------------------------------------------------------------------------------
FC UCastQ
-------------------------------------------------------------------------------
be 1
l2 2
af 3
l1 4
h2 5
ef 6
h1 7
nc 8
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Port-id : 1/1/1
===============================================================================
*A:card-1>config>qos#
|
Label |
Description |
|---|---|
|
Policy |
The policy name that uniquely identifies the policy |
|
Accounting |
Displays whether the accounting mode is packet-based or frame-based |
|
Description |
A text string that helps identify the policy’s context in the configuration file |
|
Port-Id |
Displays the physical port identifier where the network queue policy is applied |
|
Queue |
Displays the queue ID |
|
CIR |
Displays the committed information rate |
|
PIR |
Displays the peak information rate |
|
CBS |
Displays the committed burst size |
|
FC |
Displays FC to queue mapping |