sap-ingress [policy-id] [detail | association | match-criteria]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays SAP ingress QoS policy information.
Displays information about the specific policy ID.
Displays detailed policy information including policy associations.
Displays the policy associations of the sap-ingress policy.
Displays the match-criterion of the sap-ingress policy.
The following outputs are examples of QoS SAP ingress policy information, and Table: Output fields: QoS SAP ingress describes the output fields:
*A:SAS>show>qos# sap-ingress 1 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Default FC : be
Criteria-type : None
Accounting : packet-based
Classifiers Allowed : 4 Meters Allowed : 2
Classifiers Reqrd (VPLS) : 2 Meters Reqrd (VPLS) : 2
Classifiers Reqrd (EPIPE) : 1 Meters Reqrd (EPIPE) : 1
Description : Default SAP ingress QoS policy.
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS Admin MBS Admin
CIR Oper PIR Oper CBS Oper MBS Oper
-------------------------------------------------------------------------------
1 TrTcm1 0 closest max closest 7 KBits 10 KBits
0 max def def
11 TrTcm1 0 closest max closest 8 KBits 11 KBits
0 max def def
-------------------------------------------------------------------------------
FC UCastM MCastM BCastM UnknownM
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
No Matching Criteria.
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No Associations Found.
===============================================================================
*A:SAS>show>qos#
The following output is an example of SAP ingress QoS policy information about the 7210 SAS-D when the DCSP value and mask are configured.
Sample output for 7210 SAS-D with DSCP value and mask*A:7210 SAS> show qos sap-ingress 2 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (2)
-------------------------------------------------------------------------------
Policy-id : 2 Scope : Template
Default FC : be
Criteria-type : IP IP-Mac Rule Priority : None
Mac Sub-Criteria : None IP Sub-Criteria : any
IPv6 Enabled : False IPv6 Sub-Criteria : dscp
Accounting : packet-based
Classifiers Allowed : 2 Meters Allowed : 1
Classifiers Reqrd (VPLS) : 2 Meters Reqrd (VPLS) : 1
Classifiers Reqrd (L3 Mc) : 2 Meters Reqrd (L3 Mc) : 1
Classifiers Reqrd (EPIPE) : 2 Meters Reqrd (EPIPE) : 1
Description : (Not Specified)
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS Admin MBS Admin
Color Mode CIR Oper PIR Oper CBS Oper MBS Oper
-------------------------------------------------------------------------------
1 TrTcm1 0 closest max closest def def
color-blind 0 20000000 32 512
-------------------------------------------------------------------------------
FC UCastM MCastM BCastM UnknownM
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
IP Match Criteria
-------------------------------------------------------------------------------
Entry : 1
Description : (Not Specified)
Source IP : Undefined Source Port : None
Dest. IP : Undefined Dest. Port : None
Protocol : none DSCP value/mask : 4/5
Fragment : Off Ip Precedence : None
FC : be
-------------------------------------------------------------------------------
IPv6 Match Criteria
-------------------------------------------------------------------------------
No Match Criteria Entries found.
SAP Associations
-------------------------------------------------------------------------------
Service-Id : 1 (Epipe) Customer-Id : 1
- SAP : 1/1/24
The following output is an example of SAP ingress QoS policy information about the 7210 SAS-D when the DSCP name is configured.
*A:>config>service>epipe>sap$ /show qos sap-ingress 2 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (2)
-------------------------------------------------------------------------------
Policy-id : 2 Scope : Template
Default FC : be
Criteria-type : IP IP-Mac Rule Priority : None
Mac Sub-Criteria : None IP Sub-Criteria : any
IPv6 Enabled : False IPv6 Sub-Criteria : dscp
Accounting : packet-based
Classifiers Allowed : 2 Meters Allowed : 1
Classifiers Reqrd (VPLS) : 2 Meters Reqrd (VPLS) : 1
Classifiers Reqrd (L3 Mc) : 2 Meters Reqrd (L3 Mc) : 1
Classifiers Reqrd (EPIPE) : 2 Meters Reqrd (EPIPE) : 1
Description : (Not Specified)
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS Admin MBS Admin
Color Mode CIR Oper PIR Oper CBS Oper MBS Oper
-------------------------------------------------------------------------------
1 TrTcm1 0 closest max closest def def
color-blind 0 20000000 32 512
-------------------------------------------------------------------------------
FC UCastM MCastM BCastM UnknownM
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
IP Match Criteria
-------------------------------------------------------------------------------
Entry : 1
Description : (Not Specified)
Source IP : Undefined Source Port : None
Dest. IP : Undefined Dest. Port : None
Protocol : none DSCP : cp63
Fragment : Off Ip Precedence : None
FC : be
-------------------------------------------------------------------------------
IPv6 Match Criteria
-------------------------------------------------------------------------------
No Match Criteria Entries found.
SAP Associations
-------------------------------------------------------------------------------
Service-Id : 1 (Epipe) Customer-Id : 1
- SAP : 1/1/24
|
Label |
Description |
|---|---|
|
Policy-Id |
The ID that uniquely identifies the policy |
|
Scope |
Exclusive — Implies that this policy can only be applied to a single SAP |
|
Template — Implies that this policy can be applied to multiple SAPs on the router |
|
|
Default FC |
Specifies the default FC for the policy |
|
Criteria-type |
IP — Specifies that an IP criteria-based SAP ingress policy is used to select the appropriate ingress meter and corresponding FC for matched traffic |
|
MAC — Specifies that a MAC criteria-based SAP is used to select the appropriate ingress meters and corresponding FC for matched traffic |
|
|
Accounting |
Packet-based — Specifies that the meters associated with this policy do not account for packet framing overheads (such as the Inter Frame Gap (IFG) and the preamble for the Ethernet), while accounting for the bandwidth to be used by this flow Frame-based — Specifies that the meters associated with this policy account for the packet framing overheads (such as, for Ethernet, the IFG and preamble), while accounting the bandwidth to be used by the flow |
|
Classifiers Allowed |
Indicates the number of classifiers allowed for a service |
|
Classifiers Required |
Indicates the number of classifiers for a VPLS or Epipe service |
|
Description |
A text string that helps identify the policy’s context in the configuration file |
|
Meter |
Displays the meter ID |
|
Mode |
Specifies the configured mode of the meter (trTcm1,trTcm2 or srTcm) |
|
CIR Admin |
Specifies the administrative CIR parameters for the meters |
|
CIR Rule |
min — The operational CIR for the meters will be equal to or greater than the administrative rate specified using the rate command |
|
max — The operational CIR for the meter will be equal to or less than the administrative rate specified using the rate command |
|
|
closest — The operational PIR for the meters will be the rate closest to the rate specified using the rate command without exceeding the operational PIR |
|
|
PIR Admin |
Specifies the administrative PIR parameters for the meters. |
|
PIR Rule |
min — The operational PIR for the meter will be equal to or greater than the administrative rate specified using the rate command |
|
max — The operational PIR for the meters will be equal to or less than the administrative rate specified using the rate command |
|
|
closest — The operational PIR for the meters will be the rate closest to the rate specified using the rate command |
|
|
CBS |
def — Specifies the default CBS value for the meters |
|
value — Specifies the value to override the default reserved buffers for the meters |
|
|
MBS |
def — Specifies the default MBS value |
|
value — Specifies the value to override the default MBS for the meter |
|
|
UCastM |
Specifies the default unicast forwarding type meters mapping |
|
MCastM |
Specifies the overrides for the default multicast forwarding type meter mapping |
|
BCastM |
Specifies the default broadcast forwarding type meters mapping |
|
UnknownM |
Specifies the default unknown unicast forwarding type meters mapping |
|
Match Criteria |
Specifies an IP or MAC criteria entry for the policy |
|
Entry |
The entry ID in a policy or filter table |
|
DSCP |
Specifies a DiffServ Code Point (DSCP) name used for an ingress SAP QoS policy match |
|
FC |
Specifies the entry’s FC |
|
Src MAC |
Specifies a source MAC address or range to be used as a Service Ingress QoS policy match |
|
Dst MAC |
Specifies a destination MAC address or range to be used as a Service Ingress QoS policy match |
|
dot1p |
Specifies a IEEE 802.1p value to be used as the match |
|
Ethernet-type |
Specifies an Ethernet type II Ethertype value to be used as a Service Ingress QoS policy match |
|
FC |
Specifies the entry’s FC |
|
Service Association |
|
|
Service-Id |
The unique service ID number which identifies the service in the service domain |
|
Customer-Id |
Specifies the customer ID which identifies the customer to the service |
|
SAP |
Specifies the a Service Access Point (SAP) within the service where the SAP ingress policy is applied |
|
Classifiers required |
Indicates the number of classifiers for a VPLS or Epipe service |
|
Meters required |
Indicates the number of meters for a VPLS or Epipe service |