Show commands

bof

Syntax

bof [cflash-id | booted]

Context

show

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays the BOF executed on last system boot or on the specified device.

If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified since the system boot, a message displays.

Parameters

cflash-id

Specifies the cflash directory name.

cf1: (7210 SAS-D, 7210 SAS-Dxp)

cf1: | uf1: (7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C)

booted

Keyword to display the boot option file used to boot the system.

Output

The following output is an example of BOF information, and Table: Output fields: BOF describes the output fields.

Sample output
*A:ALA# show bof cf1: 
===============================================================================
BOF on cf1:
===============================================================================
    primary-image      ftp://*:*@xx.xxx.xx.xx/./images/auto-boot/solution/bothx.tim
    secondary-image    ftp://*:*@xx.xxx.xx.xx/./images/auto-boot/solution/bothx.tim
    tertiary-image     ftp://*:*@xx.xxx.xx.xx/./images/auto-boot/solution/both.tim
    primary-dns        xxx.xxx.xxx.xxx
    dns-domain         in.lucent.com
    ping 10.135.16.90
#uplinkA Port Settings:
    uplinkA-port       1/1/1
    uplinkA-address    xxx.xxx.x.xx/24 
uplinkA-autoneg
uplinkA-duplexfull
uplinkA-speed1000
    uplinkA-vlan       0
    uplinkA-route      xx.xxx.x.x/16 next-hop xxx.xxx.x.x
#uplinkB Port Settings:
    uplinkB-port       1/1/2
    uplinkB-address    0 
uplinkB-autoneg
uplinkB-duplexfull
uplinkB-speed1000
    uplinkB-vlan       0
#System Settings:
    wait               3
    persist            on
    console-speed      115200
    no console-disabled
===============================================================================
*A:ALA#
*A:ALA# show bof booted 
===============================================================================
System booted with BOF
===============================================================================
    primary-image      ftp://*:*@xx.xxx.xx.xx/./images/auto-boot/solution/bothx.tim
    secondary-image    ftp://*:*@xx.xxx.xx.xx/./images/auto-boot/solution/bothx.tim
    tertiary-image     ftp://*:*@xx.xxx.xx.xx/./images/auto-boot/solution/both.tim
    primary-dns        xxx.xxx.xxx.xxx
    dns-domain         in.lucent.com
    ping-address   xx.xxx.xx.xx
#uplinkA Port Settings:
    uplinkA-port       1/1/1
    uplinkA-address    xxx.xxx.x.xx/24 
uplinkA-autoneg
uplinkA-duplexfull
uplinkA-speed1000
    uplinkA-vlan       0
    uplinkA-route      xx.xxx.x.x/16 next-hop xxx.xxx.x.x
#uplinkB Port Settings:
    uplinkB-port       1/1/2
    uplinkB-address    0 
uplinkA-autoneg
uplinkA-duplexfull
uplinkA-speed1000
    uplinkB-vlan       0
#System Settings:
    wait               3
    persist            on
    console-speed      115200
    no console-disabled
===============================================================================
*A:ALA#
Table: Output fields: BOF

Label

Description

primary-image

The primary location of the directory that contains the runtime images of both CPM and IOM

primary-config

The primary location of the file that contains the configuration

primary-dns

The primary DNS server for resolution of hostnames to IP addresses

secondary-image

The secondary location of the directory that contains the runtime images of both CPM and IOM

secondary-config

The secondary location of the file that contains the configuration

secondary-dns

The secondary DNS server for resolution of hostnames to IP addresses

tertiary-image

The tertiary location of the directory that contains the runtime images of both CPM and IOM

tertiary-config

The tertiary location of the file that contains the configuration

tertiary-dns

The tertiary DNS server for resolution of hostnames to IP addresses

persist

on — Persistent indexes between system reboots is enabled

off — Persistent indexes between system reboots is disabled

wait

The time configured for the boot to pause while waiting for console input

autonegotiate

No autonegotiate — Autonegotiate not enabled

autonegotiate — Autonegotiate is enabled

console speed

The console port baud rate.

ping-address

The IPv4 IP address to be used for ping-test after auto-init

dns domain

The domain name used when performing DNS address resolution

uplinkA-address

Displays the Uplink-A IP address.

uplinkA-autoneg

Displays the Auto-negotiation of the management Ethernet port

uplinkA-duplex

Displays Full duplex operation

uplinkA-speed

Displays the 1000 M/bps operation

uplinkA-port

Displays the primary port to be used for auto-boot.

uplinkA-route

Displays the static route associated with uplinkA.

uplinkA-vlan

Displays the VLAN ID to be used on uplinkA.

uplinkB-address

Displays the uplinkB IP address

uplinkB-autoneg

Displays the auto-negotiation of the management Ethernet port

uplinkB-duplex

Displays the full duplex operation

uplinkB-speed

Displays the 1000 M/bps operation

uplinkB-port

Displays the secondary port to be used for auto-init

uplinkB-route

Displays the static route associated with uplinkB

uplinkB-vlan

Displays the VLAN ID to be used on uplinkB

console-disabled

Displays the status of serial port console

boot-messages

Syntax

boot-messages

Context

show

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays boot messages generated during the last system boot.

Output

The following output is an example of boot messages.

Sample output
===============================================================================
cf1:/bootlog.txt
===============================================================================
Bootlog started for Version V-0.0.I317
Build V-0.0.I317 bootrom/mpc 7xxx
Built on Tue Jan 6 02:23:14 IST 2016 by panosbld in /panosbld/ws/panos/main

?Attempting to load from file cf1:/boot.tim
Version L-0.0.I312, Fri Jan  2 04:26:32 IST 2016 by panosbld in /panosbld/ws/panos/
main
text:(3002475-->12623392) + data:(550940-->2414128)
Starting at 0xb000000...

Total Memory: 512MB  Chassis Type: sas  Card Type: badami_7210
TiMOS-L-0.0.I312 boot/mpc NOKIA SAS-D 7210 Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Jan 2 04:26:32 IST 2016 by panosbld in /panosbld/ws/panos/main

TiMOS BOOT LOADER
Extended checks enabled with overhead of 36B
Time from clock is THU JAN 08 16:04:05 2016 UTC
Switching serial output to sync mode...   done

Looking for cf1:/bof.cfg ... OK, reading

Contents of Boot Options File on cf1:
    primary-image      ftp://*:*@xxx.xxx.xxx.xx/import/panos_nightly_builds/1.0/B1-
12/STU-sultan/both.tim
    primary-config     cf1:\config.cfg
#uplinkA Port Settings:
    uplinkA-port       1/1/13
uplinkA-autoneg
uplinkA-duplexfull
uplinkA-speed1000
    uplinkA-address    xx.xxx.xx.xxx/24
    uplinkA-vlan       null
    uplinkA-route      xx.xxx.x.x/16 next-hop xx.xxx.xx.x
    uplinkA-route      xxx.xxx.x.x/16 next-hop xx.xxx.xx.x
#uplinkB Port Settings:
    uplinkB-port       1/1/2
    uplinkB-address    0
uplinkB-autoneg
uplinkB-duplexfull
uplinkB-speed1000
    uplinkB-vlan       0
#System Settings:
    wait               3
    persist            off
    console-speed      115200

Hit a key within 1 second to change boot parms...
Configuring Network with uplinkA Port Setting.....
Primary config file present at: cf1:\config.cfg

Primary image location: ftp://*:*@xxx.xxx.xxx.xx/import/panos_nightly_builds/1.0/B1-
12/STU-sultan/both.tim
Initializing uplinkA port using IP addr xx.xxx.xx.xxx.
Loading image ftp://*:*@xxx.xxx.xxx.xx/import/panos_nightly_builds/1.0/B1-12/STU-
sultan/both.tim
Version B-1.0.B1-12, Wed Jan  7 00:58:35 IST 2016 by builder in /builder/ws/panos/
main
text:(27022791-->84574868) + data:(1921023-->10720420)
Executing TiMOS image at 0x100000

Total Memory: 512MB  Chassis Type: sas  Card Type: badami_7210
TiMOS-B-1.0.B1-12 both/mpc NOKIA 7210 Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Jan 7 00:58:35 IST 2016 by builder in /builder/ws/panos/main

   ___                    ___           ___           ___
  /\  \                  /\__\         /\  \         /\  \
  \:\  \        ___     /::|  |       /::\  \       /::\  \
   \:\  \      /\__\   /:|:|  |      /:/\:\  \     /:/\ \  \
   /::\  \    _\/__/  /:/|:|__|__   /:/  \:\  \   _\:\~\ \  \
  /:/\:\__\  /\__\   /:/ |::::\__\ /:/__/ \:\__\ /\ \:\ \ \__\
 /:/  \/__/ /:/  /   \/__/~~/:/  / \:\  \ /:/  / \:\ \:\ \/__/
/:/  /     /:/  /          /:/  /   \:\  /:/  /   \:\ \:\__\
\/__/      \/__/          /:/  /     \:\/:/  /     \:\/:/  /
                         /:/  /       \::/  /       \::/  /
                         \/__/         \/__/         \/__/

Time from clock is THU JAN 08 16:05:20 2016 UTC

Attempting to exec primary configuration file:
   'cf1:\config.cfg' ...
System Configuration
System Security Configuration
Log Configuration
System Security Cpm Hw Filters Configuration
QoS Slope and Queue Policies Configuration
Port Scheduler Policies Configuration
Card Configuration
Port Configuration
Management Router Configuration
Router (Network Side) Configuration
Static Route Configuration
Service Configuration
Router (Service Side) Configuration
Executed 234 lines in 0.1 seconds from file cf1:\config.cfg

INFO: CLI #1008 The SNMP daemon is disabled.  To enable SNMP, execute the command 'c
onfig>system>snmp no shutdown'.
TiMOS-B-1.0.B1-12 both/mpc NOKIA SAS-D 7210 Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Jan 7 00:58:35 IST 2016 by builder in /builder/ws/panos/main

Login: