chassis [environment] [power-supply]
show
Supported on all 7210 SAS platforms as described in this document
The environment option is not supported on the 7210 SAS-D.
This command displays general chassis status information.
Displays chassis environmental status information.
Displays chassis power supply status information.
The following output is an example of chassis information, and Table: Output fields: chassis describes the output fields.
Sample outputThis CLI output is obtained only if the hardware supports ‟DC source failure detection”.
A:7210-SAS> show chassis
===============================================================================
Chassis Information
===============================================================================
Name : STU2597
Type : 7210 SAS-D-1
Location :
Coordinates :
CLLI code :
Number of slots : 2
Number of ports : 24
Critical LED state : Red
Major LED state : Off
Minor LED state : Off
Over Temperature state : OK
Base MAC address : 00:25:ba:04:b9:bc
Hardware Data
Part number : 3HE04410ABAC01
CLEI code : IPMK310JRA
Serial number : NS1026C0341
Manufacture date : 06292010
Manufacturing string :
Manufacturing deviations :
Time of last boot : 2010/11/09 16:12:40
Current alarm state : alarm active
-------------------------------------------------------------------------------
Environment Information
Number of fan trays : 1
Number of fans : 3
Fan tray number : 1
Status : up
Speed : half speed
-------------------------------------------------------------------------------
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : dc
Status : failed
DC power : out of range
Input power : out of range
Output power : within range
Power supply number : 2
Configured power supply type : dc
Status : up
DC power : within range
Input power : within range
Output power : within range
===============================================================================
A:7210-SAS>
A:7210-SAS> show chassis
===============================================================================
Chassis Information
===============================================================================
Name : STU2597
Type : 7210 SAS-D-1
Location :
Coordinates :
CLLI code :
Number of slots : 2
Number of ports : 24
Critical LED state : Off
Major LED state : Off
Minor LED state : Off
Over Temperature state : OK
Base MAC address : 00:25:ba:04:b9:bc
Hardware Data
Part number : 3HE04410ABAC01
CLEI code : IPMK310JRA
Serial number : NS1026C0341
Manufacture date : 06292010
Manufacturing string :
Manufacturing deviations :
Time of last boot : 2010/11/09 16:12:40
Current alarm state : alarm cleared
-------------------------------------------------------------------------------
Environment Information
Number of fan trays : 1
Number of fans : 3
Fan tray number : 1
Status : up
Speed : half speed
-------------------------------------------------------------------------------
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : dc
Status : up
DC power : within range
Input power : within range
Output power : within range
Power supply number : 2
Configured power supply type : dc
Status : up
DC power : within range
Input power : within range
Output power : within range
===============================================================================
A:7210-SAS>
*A:SAS-D>show# chassis
===============================================================================
Chassis Information
===============================================================================
Name : SAS-D
Type : 7210 SAS-D 6F4T-1
Location :
Coordinates :
CLLI code :
Number of slots : 2
Number of ports : 10
Critical LED state : Off
Major LED state : Off
Minor LED state : Off
Over Temperature state : OK
Base MAC address : 00:3f:11:ab:ca:11
Hardware Data
Part number :
CLEI code :
Serial number : NS1050C0071
Manufacture date :
Manufacturing string :
Manufacturing deviations :
Time of last boot : 1970/01/01 00:00:03
Current alarm state : alarm cleared
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Power Supply Information
Number of power supplies : 1
Power supply number : 1
Configured power supply type : ac single
Status : up
AC power : within range
===============================================================================
*A:SAS-D>show#
Label |
Description |
|---|---|
Name |
The system name for the router. |
Type |
The device model number. |
Location |
The system location for the device. |
Coordinates |
A user-configurable string that indicates the Global Positioning System (GPS) coordinates for the location of the chassis. For example: N 45 58 23, W 34 56 12 N37 37' 00 latitude, W122 22' 00 longitude N36*39.246' W121*40.121' |
CLLI Code |
The Common Language Location Identifier (CLLI) that uniquely identifies the geographic location of places and specific functional categories of equipment unique to the telecommunications industry. |
Number of slots |
The number of slots in this chassis that are available for plug-in cards. The total number includes the IOM slots and the CPM slots. |
Number of ports |
The total number of ports currently installed in this chassis. This count does not include the Ethernet ports on the CPMs that are used for management access. |
Critical LED state |
The current state of the Critical LED in this chassis. |
Major LED state |
The current state of the Major LED in this chassis. |
Minor LED state |
The current state of the Minor LED in this chassis. |
Base MAC address |
The base chassis Ethernet MAC address. |
Admin chassis mode |
The configured chassis mode. |
Oper chassis mode |
The current chassis mode. |
Part number |
The CPM part number. |
CLEI code |
The code used to identify the router. |
Serial number |
The CPM part number. Not user modifiable. |
Manufacture date |
The chassis manufacture date. Not user modifiable. |
Manufacturing string |
Factory-inputted manufacturing text string. Not user modifiable. |
Administrative state |
Up The card is administratively up. |
Down The card is administratively down. |
|
Operational state |
Up The card is operationally up. |
Down The card is operationally down. |
|
Time of last boot |
The date and time the most recent boot occurred. |
Current alarm state |
Displays the alarm conditions for the specific board. |
Number of fan trays |
The total number of fan trays installed in this chassis. |
Number of fans |
The total number of fans installed in this chassis. |
Operational status |
Current status of the fan tray. |
Fan speed |
Half speed The fans are operating at half speed. |
Full speed The fans are operating at full speed. |
|
Number of power supplies |
The number of power supplies installed in the chassis. |
Power supply number |
The ID for each power supply installed in the chassis. |
AC power |
Within range AC voltage is within range. |
Out of range AC voltage is out of range. |
|
DC power |
Within range DC voltage is within range. |
Out of range DC voltage is out of range. |
|
Over temp |
Within range The current temperature is within the acceptable range. |
Out of range The current temperature is above the acceptable range. |
|
Status |
Up The specified power supply is up. |
Down The specified power supply is down |
card [slot-number] [detail]
card state
show
Supported on all 7210 SAS platforms as described in this document
This command displays card information.
If no command line parameters are specified, a card summary for all cards is displayed.
Displays information for the specified card slot.
Displays detailed card information.
The following outputs are examples of card information, and the associated tables describe the output fields.
Sample output for 7210 SAS-K 2F1C2T, Table: Output fields: card
Output sample for 7210 SAS-K 2F1C2T card detail, Table: Output fields: card detail
Output fields for card state, Table: Output fields: card state
*A:SAH01-051>show# card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 iom-sas up up
A sfm-sas up up/active
===============================================================================
*A:SAH01-051>show#
|
Label |
Description |
|---|---|
|
Slot |
The slot number of the card in the chassis. |
|
Provisioned Card-type |
The card type that is configured for the slot. |
|
Equipped Card-type |
The card type that is actually populated in the slot. |
|
Admin State |
Up The card is administratively up. |
|
Down The card is administratively down. |
|
|
Operational State |
Up The card is operationally up. |
|
Down The card is operationally down. |
*A:SAH01-051>show# card detail
===============================================================================
Card 1
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 iom-sas up up
IOM Card Specific Data
Clock source : none
Named Pool Mode : Disabled
Available MDA slots : 2
Installed MDAs : 1
Hardware Data
Platform type : N/A
Part number :
CLEI code :
Serial number : SAH01-051
Manufacture date :
Manufacturing string : (Not Specified)
Manufacturing deviations : (Not Specified)
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 49C
Temperature threshold : 58C
Software boot (rom) version : X-0.0.I2282 on Sat Dec 20 14:21:54 IST
2014 by builder
Software version : TiMOS-B-7.0.B1-205 both/xen NOKIA SAS-K *
Time of last boot : 2014/01/14 05:13:59
Current alarm state : alarm cleared
Base MAC address : 00:03:fa:27:15:4e
Last bootup reason : hard boot
Memory capacity : 1,024 MB
* indicates that the corresponding row element may have been truncated.
===============================================================================
Card A
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
A sfm-sas up up/active
BOF last modified : N/A
Config file version : THU JAN 01 00:19:52 1970 UTC
Config file last modified : 2014/02/10 05:36:50
Config file last saved : N/A
M/S clocking ref state : primary
Flash - cf1:
Administrative State : up
Operational state : up
Serial number : 4C530007300704117312
Firmware revision : 1.27
Model number : Flash 0
Size : 7,629 MB
Free space : 7,574 MB
Flash - uf1:
Administrative State : up
Operational state : not equipped
Hardware Data
Platform type : N/A
Part number :
CLEI code :
Serial number : SAH01-051
Manufacture date :
Manufacturing string : (Not Specified)
Manufacturing deviations : (Not Specified)
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 49C
Temperature threshold : 58C
Software boot (rom) version : X-0.0.I2282 on Sat Dec 20 14:21:54 IST
2014 by builder
Software version : TiMOS-B-7.0.B1-205 both/xen NOKIA SAS-K *
Time of last boot : 2014/01/14 05:13:50
Current alarm state : alarm cleared
Base MAC address : 00:03:fa:27:15:4e
Memory capacity : 1,024 MB
* indicates that the corresponding row element may have been truncated.
===============================================================================
*A:SAH01-051>show#
|
Label |
Description |
|---|---|
|
Clock source |
Source of clock for the IOM. Note: Currently this parameter always displays 'none' |
|
Available MDA slots |
The number of MDA slots available on the IOM. |
|
Installed MDAs |
The number of MDAs installed on the IOM |
|
Part number |
The IOM part number. |
|
CLEI code |
The Common Language Location Identifier (CLLI) code string for the router. |
|
Serial number |
The serial number. Not user modifiable. |
|
Manufacture date |
The chassis manufacture date. Not user modifiable. |
|
Manufacturing string |
Factory-inputted manufacturing text string. Not user modifiable. |
|
Manufacturing deviations |
Displays a record of changes by manufacturing to the hardware or software and which is outside the normal revision control process. |
|
Administrative state |
Up The card is administratively up. |
|
Down The card is administratively down. |
|
|
Operational state |
Up The card is operationally up. |
|
Down The card is operationally down. |
|
|
Temperature |
Internal chassis temperature. |
|
Temperature threshold |
The value above which the internal temperature must rise to indicate that the temperature is critical. |
|
Software boot version |
The version of the boot image. |
|
Software version |
The software version number. |
|
Time of last boot |
The date and time the most recent boot occurred. |
|
Current alarm state |
Displays the alarm conditions for the specific board. |
|
Base MAC address |
Displays the base MAC address of the hardware component. |
|
Memory Capacity |
Displays the memory capacity of the card. |
The following output is an example of CPM card information, and Table: Output fields: CPM card describes the output fields.
*A:SAS-D>show# card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Equipped Admin Operational
Card-type Card-type State State
-------------------------------------------------------------------------------
1 iom-sas iom-sas up up
A sfm-sas sfm-sas up up/active
===============================================================================
*A:SAS-D>show#
|
Label |
Description |
|---|---|
|
Slot |
The slot of the card in the chassis. |
|
Card Provisioned |
The SF/CPM type that is configured for the slot. |
|
Card Equipped |
The SF/CPM type that is actually populated in the slot. |
|
Admin State |
Up The SF/CPM is administratively up. |
|
Down The SF/CPM is administratively down. |
|
|
Operational State |
Up The SF/CPM is operationally up. |
|
Down The SF/CPM is operationally down. |
|
|
BOF last modified |
The date and time of the most recent BOF modification. |
|
Config file version |
The configuration file version. |
|
Config file last modified |
The date and time of the most recent config file modification. |
|
Config file last modified |
The date and time of the most recent config file modification. |
|
Config file last saved |
The date and time of the most recent config file save. |
|
CPM card status |
active The card is acting as the primary (active) CPM in a redundant system. standby The card is acting as the standby (secondary) CPM in a redundant system. |
|
Administrative state |
Up The CPM is administratively up. |
|
Down The CPM is administratively down. |
|
|
Operational state |
Up The CPM is operationally up. |
|
Down The CPM is operationally down. |
|
|
Serial number |
The compact flash part number. Not user modifiable. |
|
Firmware revision |
The firmware version. Not user modifiable. |
|
Model number |
The compact flash model number. Not user modifiable. |
|
Size |
The amount of space available on the compact flash card. |
|
Free space |
The amount of space remaining on the compact flash card. |
|
Part number |
The SF/CPM part number. |
|
CLEI code |
The code used to identify the router. |
|
Serial number |
The SF/CPM part number. Not user modifiable. |
|
Manufacture date |
The chassis manufacture date. Not user modifiable. |
|
Manufacturing string |
Factory-inputted manufacturing text string. Not user modifiable. |
|
Administrative state |
Up The card is administratively up. Down The card is administratively down. |
|
Operational state |
Up The card is operationally up. |
|
Down The card is operationally down. |
|
|
Time of last boot |
The date and time the most recent boot occurred. |
|
Current alarm state |
Displays the alarm conditions for the specific board. |
|
Status |
Displays the current status. |
|
Temperature |
Internal chassis temperature. |
|
Temperature threshold |
The value above which the internal temperature must rise to indicate that the temperature is critical. |
|
Software boot version |
The version of the boot image. |
|
Memory capacity |
The total amount of memory. |
The following table describes the output fields.
|
Label |
Description |
|---|---|
|
Slot/MDA |
The slot number of the card in the chassis. |
|
Provisioned Type |
The card type that is configured for the slot. |
|
Equipped Type |
The card type that is actually populated in the slot. |
|
Admin State |
Up The card is administratively up. |
|
Down The card is administratively down. |
|
|
Operational State |
Up The card is operationally up. |
|
provisioned There is no card in the slot but it has been preconfigured. |
|
|
Num Ports |
The number of ports available on the MDA. |
|
Num MDA |
The number of MDAs installed. |
|
Comments |
Indicates whether the SF/CPM is the active or standby. |
mda [slot [/mda]] [detail]
show
Supported on all 7210 SAS platforms as described in this document
This command displays MDA information.
If no command line options are specified, a summary output of all MDAs is displayed in table format.
Specifies the slot number for which to display MDA information.
Specifies the MDA number in the slot for which to display MDA information.
Displays detailed MDA information.
The following outputs are an example of MDA information, and Table: Output fields: MDA and Table: Output fields: MDA detail describe the output fields.
Sample outputB:Dut-D# show mda 1/1 detail
===============================================================================
MDA 1/1 detail
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 1 m10-1gb-sfp m10-1gb-sfp up up
MDA Specific Data
Maximum port count : 10
Number of ports equipped : 10
Network ingress queue policy : default
Capabilities : Ethernet
Hardware Data
Part number : 3HE00026AAAC01
CLEI code :
Serial number : NS042800525
Manufacture date : 07082004
Manufacturing string :
Manufacturing deviations :
Administrative state : up
Operational state : up
Temperature : 42C
Temperature threshold : 75C
Time of last boot : 2007/04/11 09:37:52
Current alarm state : alarm cleared
Base MAC address : 00:03:fa:0e:9e:03
===============================================================================
B:Dut-D#
*A:SAH01-051>show# mda 1 detail
===============================================================================
MDA 1/1 detail
===============================================================================
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 1 m2-tx+2-sfp+1-combo up up
MDA Specific Data
Maximum port count : 5
Number of ports equipped : 5
Network ingress queue policy : default
Capabilities : Ethernet
Hardware Data
Platform type : N/A
Part number :
CLEI code :
Serial number : SAH01-051
Manufacture date :
Manufacturing string : (Not Specified)
Manufacturing deviations : (Not Specified)
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 49C
Temperature threshold : 58C
Software version : N/A
Time of last boot : 2014/01/14 05:14:03
Current alarm state : alarm cleared
Base MAC address : 00:03:fa:27:15:50
Firmware version : N/A
===============================================================================
*A:SAH01-051>show#
*A:SAS-D>show# mda 1 detail
===============================================================================
MDA 1/1 detail
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 1 m4-tx+6-sfp m4-tx+6-sfp up up
MDA Specific Data
Maximum port count : 10
Number of ports equipped : 10
Network ingress queue policy : default
Capabilities : Ethernet
Hardware Data
Part number :
CLEI code :
Serial number : NS1050C0071
Manufacture date :
Manufacturing string :
Manufacturing deviations :
Administrative state : up
Operational state : up
Temperature : 44C
Temperature threshold : 55C
Software version : N/A
Time of last boot : 1970/01/01 00:00:30
Current alarm state : alarm cleared
Base MAC address : 00:3f:11:ab:ca:13
-------------------------------------------------------------------------------
QOS Settings
-------------------------------------------------------------------------------
Ing. Named Pool Policy : None
Egr. Named Pool Policy : None
===============================================================================
*A:SAS-D>show#
Label |
Description |
|---|---|
Slot |
The chassis slot number. |
MDA |
The MDA slot number. |
Provisioned MDA-type |
The MDA type provisioned. |
Equipped MDA-type |
The MDA type actually installed. |
Admin State |
Up Administratively up. |
Down Administratively down. |
|
Ops State |
Up Operationally up. |
Down Operationally down. |
Label |
Description |
|---|---|
Slot |
The chassis slot number. |
Slot |
The MDA slot number. |
Provisioned Provisioned-type |
The provisioned MDA type. |
Equipped Mda-type |
The MDA type that is physically inserted into this slot in this chassis. |
Admin State |
Up The MDA is administratively up. |
Down The MDA is administratively down. |
|
Operational State |
Up The MDA is operationally up. |
Down The MDA is operationally down. |
|
Maximum port count |
The maximum number of ports that can be equipped on the MDA card. |
Number of ports equipped |
The number of ports that are actually equipped on the MDA. |
Transmit timing selected |
Indicates the source for the timing used by the MDA. |
Sync interface timing status |
Indicates whether the MDA has qualified one of the timing signals from the CPMs. |
Network Ingress Queue Policy |
Specifies the network queue policy applied to the MDA to define the queuing structure for this object. |
Capabilities |
Specifies the minimum size of the port that can exist on the MDA. |
Part number |
The hardware part number. |
CLEI code |
The code used to identify the MDA. |
Serial number |
The MDA part number. Not user modifiable. |
Manufacture date |
The MDA manufacture date. Not user modifiable. |
Manufacturing string |
Factory-inputted manufacturing text string. Not user modifiable. |
Administrative state |
Up The MDA is administratively up. |
Down The MDA is administratively down. |
|
Operational state |
Up The MDA is operationally up. |
Down The MDA is operationally down. |
|
Time of last boot |
The date and time the most recent boot occurred. |
Current alarm state |
Displays the alarm conditions for the specific MDA. |
Base MAC address |
The base chassis Ethernet MAC address. Special purpose MAC addresses used by the system software are constructed as offsets from this base address. |
pools mda-id [/port] [access-app pool-name]
pools mda-id [/port] [network-app pool-name]
show
7210 SAS-D and 7210 SAS-Dxp
This command displays pool information.
Displays the pool information of the specified MDA.
Displays the pool information of the specified QoS policy.
Displays the pool information of the specified QoS policy.
The following outputs are examples of pool information, and Table: Output fields: pool describes show the output fields.
Dumping concise pool information for all ports in the MDA:
*A:card-1>config# show pools 1/1
===============================================================================
Type Id App. Pool Name Actual ResvCBS PoolSize
Admin ResvCBS
-------------------------------------------------------------------------------
Port 1/1/1 Acc-Egr default 0 0
Sum
Port 1/1/1 AUp-Egr default 50 99
Sum
Port 1/1/2 Acc-Egr default 26 79
Sum
Port 1/1/2 AUp-Egr default 0 0
Sum
Port 1/1/3 Acc-Egr default 26 79
Sum
Port 1/1/3 AUp-Egr default 0 0
Sum
Port 1/1/4 Acc-Egr default 26 79
Sum
...
Sum
Port 1/1/24 AUp-Egr default 0 0
Sum
===============================================================================
*A:card-1>config#
*A:SAS-D>show# pools 1/1
===============================================================================
===============================================================================
Type Id App. Pool Name Actual ResvCBS PoolSize
Admin ResvCBS
-------------------------------------------------------------------------------
Port 1/1/1 Acc-Egr default 68 186
Sum
Port 1/1/1 Net-Egr default 0 0
Sum
Port 1/1/2 Acc-Egr default 68 186
Sum
Port 1/1/2 Net-Egr default 0 0
Sum
Port 1/1/3 Acc-Egr default 68 186
Sum
Port 1/1/3 Net-Egr default 0 0
Sum
Port 1/1/4 Acc-Egr default 68 186
Sum
Port 1/1/4 Net-Egr default 0 0
Sum
Port 1/1/5 Acc-Egr default 68 186
Sum
Port 1/1/5 Net-Egr default 0 0
Sum
Port 1/1/6 Acc-Egr default 68 186
Sum
Port 1/1/6 Net-Egr default 0 0
Sum
Port 1/1/7 Acc-Egr default 68 186
Sum
Port 1/1/7 Net-Egr default 0 0
Sum
Port 1/1/8 Acc-Egr default 68 186
Sum
Port 1/1/8 Net-Egr default 0 0
Sum
Port 1/1/9 Acc-Egr default 68 186
Sum
Port 1/1/9 Net-Egr default 0 0
Sum
Port 1/1/10 Acc-Egr default 0 0
Sum
Port 1/1/10 Net-Egr default 68 186
Sum
===============================================================================
*A:SAS-D>show#
The following output displays egress pool information for the access port:
*A:card-1>config# show pools 1/1/5 access-egress
===============================================================================
Pool Information
===============================================================================
Port : 1/1/5
Application : Acc-Egr Pool Name : default
Resv CBS : Sum
-------------------------------------------------------------------------------
Utilization State Start-Threshold
-------------------------------------------------------------------------------
High-Slope Down 75%
Low-Slope Down 50%
-------------------------------------------------------------------------------
Queue High Slope Drop Rate(%) Low Slope Drop Rate(%)
-------------------------------------------------------------------------------
Queue 1 6.250000 100.000000
Queue 2 6.250000 100.000000
Queue 3 6.250000 100.000000
Queue 4 6.250000 100.000000
Queue 5 6.250000 100.000000
Queue 6 6.250000 100.000000
Queue 7 6.250000 100.000000
Queue 8 6.250000 100.000000
Pool Total : 79 KB
Pool Shared : 53 KB Pool Resv : 26 KB
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
-------------------------------------------------------------------------------
FC-Maps ID CBS Depth A.CIR A.PIR
O.CIR O.PIR
-------------------------------------------------------------------------------
be 1/1/5 3200 0 0 1000000
0 Max
l2 1/1/5 3200 0 0 1000000
0 Max
af 1/1/5 3200 0 0 1000000
0 Max
l1 1/1/5 3200 0 0 1000000
0 Max
h2 1/1/5 3200 0 0 1000000
0 Max
ef 1/1/5 3200 0 0 1000000
0 Max
h1 1/1/5 3200 0 0 1000000
0 Max
nc 1/1/5 3200 0 0 1000000
0 Max
===============================================================================
*A:card-1>config#
*A:SAS-D>show# pools 1/1/2 access-egress
===============================================================================
Pool Information
===============================================================================
Port : 1/1/2
Application : Acc-Egr Pool Name : default
Resv CBS : Sum
-------------------------------------------------------------------------------
High Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 70 90 75
Queue2 Down 70 90 75
Queue3 Down 70 90 75
Queue4 Down 70 90 75
Queue5 Down 70 90 75
Queue6 Down 70 90 75
Queue7 Down 70 90 75
Queue8 Down 70 90 75
-------------------------------------------------------------------------------
Low Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 50 75 75
Queue2 Down 50 75 75
Queue3 Down 50 75 75
Queue4 Down 50 75 75
Queue5 Down 50 75 75
Queue6 Down 50 75 75
Queue7 Down 50 75 75
Queue8 Down 50 75 75
-------------------------------------------------------------------------------
Non Tcp Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 50 75 75
Queue2 Down 50 75 75
Queue3 Down 50 75 75
Queue4 Down 50 75 75
Queue5 Down 50 75 75
Queue6 Down 50 75 75
Queue7 Down 50 75 75
Queue8 Down 50 75 75
-------------------------------------------------------------------------------
Time Avg Factor
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Queue Id Time Avg Factor
-------------------------------------------------------------------------------
Queue1 7
Queue2 7
Queue3 7
Queue4 7
Queue5 7
Queue6 7
Queue7 7
Queue8 7
MMU Pool Total In Use: 0 KB MMU Pool Shared In*: 0 KB
Pool Total : 186 KB
Pool Shared : 118 KB Pool Resv : 68 KB
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
-------------------------------------------------------------------------------
ID FC-MAPS CBS (B) Depth A.CIR A.PIR
O.CIR O.PIR
-------------------------------------------------------------------------------
1/1/2 be 8698 0 0 1000000
0 Max
1/1/2 l2 8698 0 0 1000000
0 Max
1/1/2 af 8698 0 0 1000000
0 Max
1/1/2 l1 8698 0 0 1000000
0 Max
1/1/2 h2 8698 0 0 1000000
0 Max
1/1/2 ef 8698 0 0 1000000
0 Max
1/1/2 h1 8698 0 0 1000000
0 Max
1/1/2 nc 8698 0 0 1000000
0 Max
===============================================================================
* indicates that the corresponding row element may have been truncated.
The following output displays egress pool information for an access uplink port:
*A:card-1>config# show pools 1/1/1 access-uplink-egress
===============================================================================
Pool Information
===============================================================================
Port : 1/1/1
Application : AUp-Egr Pool Name : default
Resv CBS : Sum
-------------------------------------------------------------------------------
Utilization State Start-Threshold
-------------------------------------------------------------------------------
High-Slope Down 75%
Low-Slope Down 50%
-------------------------------------------------------------------------------
Queue High Slope Drop Rate(%) Low Slope Drop Rate(%)
-------------------------------------------------------------------------------
Queue 1 6.250000 100.000000
Queue 2 6.250000 100.000000
Queue 3 6.250000 100.000000
Queue 4 6.250000 100.000000
Queue 5 6.250000 100.000000
Queue 6 6.250000 100.000000
Queue 7 6.250000 100.000000
Queue 8 6.250000 100.000000
Pool Total : 99 KB
Pool Shared : 49 KB Pool Resv : 50 KB
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
-------------------------------------------------------------------------------
FC-Maps ID CBS Depth A.CIR A.PIR
O.CIR O.PIR
-------------------------------------------------------------------------------
be 1/1/1 3557 0 0 1000000
0 Max
l2 1/1/1 3557 0 250000 1000000
249984 Max
af 1/1/1 10671 0 250000 1000000
249984 Max
l1 1/1/1 3557 0 250000 1000000
249984 Max
h2 1/1/1 10671 0 1000000 1000000
Max Max
ef 1/1/1 10671 0 1000000 1000000
Max Max
h1 1/1/1 3557 0 100000 1000000
100032 Max
nc 1/1/1 3557 0 100000 1000000
100032 Max
===============================================================================
*A:card-1>config#
*A:SASD>config>port# show pools 1/1/9 access-uplink-egress
===============================================================================
Pool Information
===============================================================================
Port : 1/1/9
Application : Net-Egr Pool Name : default
Resv CBS : Sum
-------------------------------------------------------------------------------
High Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 70 90 75
Queue2 Down 70 90 75
Queue3 Down 70 90 75
Queue4 Down 70 90 75
Queue5 Down 70 90 75
Queue6 Down 70 90 75
Queue7 Down 70 90 75
Queue8 Down 70 90 75
-------------------------------------------------------------------------------
Low Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 50 75 75
Queue2 Down 50 75 75
Queue3 Down 50 75 75
Queue4 Down 50 75 75
Queue5 Down 50 75 75
Queue6 Down 50 75 75
Queue7 Down 50 75 75
Queue8 Down 50 75 75
-------------------------------------------------------------------------------
Non Tcp Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 50 75 75
Queue2 Down 50 75 75
Queue3 Down 50 75 75
Queue4 Down 50 75 75
Queue5 Down 50 75 75
Queue6 Down 50 75 75
Queue7 Down 50 75 75
Queue8 Down 50 75 75
-------------------------------------------------------------------------------
Time Avg Factor
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Queue Id Time Avg Factor
-------------------------------------------------------------------------------
Queue1 7
Queue2 7
Queue3 7
Queue4 7
Queue5 7
Queue6 7
Queue7 7
Queue8 7
MMU Pool Total In Use: 0 KB MMU Pool Shared In*: 0 KB
Pool Total : 186 KB
Pool Shared : 102 KB Pool Resv : 68 KB
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
-------------------------------------------------------------------------------
ID FC-MAPS CBS (B) Depth A.CIR A.PIR
O.CIR O.PIR
-------------------------------------------------------------------------------
1/1/9 be 8698 0 0 40000
0 Max
1/1/9 l2 8698 0 0 40000
0 Max
1/1/9 af 8698 0 0 40000
0 Max
1/1/9 l1 8698 0 0 40000
0 Max
1/1/9 h2 8698 0 0 40000
0 Max
1/1/9 ef 8698 0 0 40000
0 Max
1/1/9 h1 8698 0 0 40000
0 Max
1/1/9 nc 8698 0 0 40000
0 Max
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SASD>config>port#
Label |
Description |
|---|---|
Type |
Specifies the pool type. |
ID |
Specifies the card/mda or card/MDA/port designation. |
Application/Type |
Specifies the nature of usage the pool would be used for. The pools could be used for access or access uplink at egress. |
Pool Name |
Specifies the name of the pool being used. |
Resv CBS |
Specifies the percentage of pool size reserved for CBS. |
Utilization |
Specifies the type of the slope policy. |
State |
The administrative status of the port. |
Start-Threshold |
Specifies the percentage of the buffer used after which the drop probability starts to rise above 0. |
Actual ResvCBS |
Specifies the actual percentage of pool size reserved for CBS. |
Admin ResvCBS |
Specifies the percentage of pool size reserved for CBS. |
Pool Total |
Displays the total pool size. |
Pool Shared |
Displays the amount of the pool which is shared. |
Pool Resv |
Specifies the percentage of reserved pool size. |
Pool Total In Use |
Displays the total amount of the pool which is in use. |
Pool Shared In Use |
Displays the amount of the shared pools that is in use. |
For 7210 SAS-D and 7210 SAS-Dxp |
|
Max-Avg |
Specifies the percentage of the buffer used after which the drop probability is 100%.This implies that all packets beyond this point will be dropped. |
Time Avg Factor |
Specifies the time average factor the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization. |