lag [lag-id] [detail] [statistics]
lag lag-id associations
lag [lag-id] description
lag [lag-id] port
show
Supported on all 7210 SAS platforms as described in this document
This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Displays only information about the specified LAG ID.
Displays detailed LAG information.
Displays LAG statistics information.
Displays a list of current router interfaces to which the LAG is assigned.
Displays LAG description strings.
Display the LAG ports
The following outputs are examples of LAG information, and the associated tables describe the output fields.
Sample output for 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C, Table: Output fields: LAG
Sample output for LAG detail, Table: Output fields: LAG detail
Sample output for LAG Statistics, Table: Output fields: LAG statistics
Sample output for LAG Associations, Table: Output fields: LAG associations
Sample output without MC-LAG, Table: Output fields: LAG (no MC-LAG)
*A:SAH01-051>show# lag 1
===============================================================================
Lag Data
===============================================================================
Lag-id Adm Opr Port-Threshold Up-Link-Count MC Act/Stdby
-------------------------------------------------------------------------------
1 down down 0 0 N/A
===============================================================================
*A:SAH01-051>show#
*A:SAH01-051>show# lag 1 de
detail description
*A:SAH01-051>show# lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : down Opr : down
Thres. Exceeded Cnt : 0 Port Threshold : 0
Thres. Last Cleared : 04/29/2014 20:51:33 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : 00:03:fa:27:15:6a Lag-IfIndex : 1342177281
Hardware Address : 00:03:fa:27:15:6a
Hold-time Down : 0.0 sec
LACP : disabled
Uplink : No
Standby Signaling : lacp DEI Classification : Disabled
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
===============================================================================
*A:SAH01-051>show#
Label |
Description |
|---|---|
LAG ID |
The LAG ID that the port is assigned to. |
Adm |
Up The LAG is administratively up. |
Down The LAG is administratively down. |
|
Opr |
Up The LAG is operationally up. |
Down The LAG is operationally down. |
|
Port-Threshold |
The number of operational links for the LAG at or below which the configured action will be invoked. |
Up-Link-Count |
The number of ports that are physically present and have physical links present. |
MC Act/Stdby |
Member port is selected as active or standby link. |
*A:Dut-B# show lag 10 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 10 Mode : access
Adm : up Opr : up
Thres. Exceeded Cnt : 1 Port Threshold : 0
Thres. Last Cleared : 05/17/2009 19:33:00 Threshold Action : down
Dynamic Cost : false Encap Type : qinq
Configured Address : 00:03:fa:8d:45:d2 Lag-IfIndex : 1342177290
Hardware Address : 00:03:fa:8d:45:d2 Adapt Qos : distribute
Hold-time Down : 0.0 sec Port Type : standard
Per FP Ing Queuing : disabled
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 1 Forced : -
System Id : 00:03:fa:8d:44:88 System Priority : 32768
Admin Key : 32777 Oper Key : 40009
Prtr System Id : 00:03:fa:13:6f:a7 Prtr System Priority : 32768
Prtr Oper Key : 32777
MC Peer Address : 10.20.1.2 MC Peer Lag-id : 10
MC System Id : 00:02:80:01:00:0a MC System Priority : 100
MC Admin Key : 40009 MC Active/Standby : active
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : peer decided
MC Config Mismatch : no mismatch
Source BMAC LSB : use-lacp-key Oper Src BMAC LSB : 9c:49
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/1/10 up active up yes 1 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/1/10 actor No No Yes Yes Yes Yes Yes Yes
1/1/10 partner No No Yes Yes Yes Yes Yes Yes
===============================================================================
*A:ALA-48>show# lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description:
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : up Opr : down
Thres. Exceeded Cnt : 0 Port Threshold : 3
Thres. Last Cleared : 02/21/2007 12:39:36 Threshold Action : dynamic cost
Dynamic Cost : false Encap Type : null
Configured Address : 04:67:01:01:00:01 Lag-IfIndex : 1342177281
Hardware Address : 14:30:ff:00:01:41 Adapt Qos : distribute
Hold-time Down : 0.0 sec
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : enabled
Number of sub-groups: 0 Forced : -
System Id : 14:30:ff:00:00:00 System Priority : 1
Admin Key : 32768 Oper Key : 32666
Prtr System Id : Prtr System Priority : 0
Prtr Oper Key : 0
MC Peer Address : 10.10.10.2 MC Peer Lag-id : 1
MC System Id : 00:00:00:33:33:33 MC System Priority : 32888
MC Admin Key : 32666 MC Active/Standby : active
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : peer timed out (no route to peer), selected local
subgroup
MC Config Mismatch : no mismatch
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
===============================================================================
*A:ALA-48>show#
*A:7210-SAS>show# lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : up Opr : down
Thres. Exceeded Cnt : 0 Port Threshold : 1
Thres. Last Cleared : 05/31/2011 11:55:49 Threshold Action : down
Encap Type : null
Configured Address : 00:25:ba:0a:33:cc Lag-IfIndex : 1342177281
Hardware Address : 00:25:ba:0a:33:cc
Hold-time Down : 0.0 sec
LACP : disabled
Uplink : No
Split Horizon Group : (Not Specified)
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
===============================================================================
*A:7210-SAS>show#
*A:PE4-M2>show# lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : network
Adm : up Opr : up
Thres. Exceeded Cnt : 10 Port Threshold : 0
Thres. Last Cleared : 11/03/2016 18:38:22 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : c4:08:41:61:61:bf Lag-IfIndex : 1342177281
Hardware Address : c4:08:41:61:61:bf Load Balancing : default
Hold-time Down : 0.0 sec
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
MUX control : coupled
Subgrp hold time : 0.0 sec Remaining time : 0.0 sec
Subgrp selected : 1 Subgrp candidate : -
Subgrp count : 1
System Id : c4:08:41:61:61:a3 System Priority : 32768
Admin Key : 31776 Oper Key : 31776
Prtr System Id : 4c:5f:d2:c1:5d:3a Prtr System Priority : 32768
Prtr Oper Key : 31776
Standby Signaling : lacp DEI Classification : Disabled
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/1/1 up active up yes 1 - 32768
1/1/7 up active up 1 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/1/1 actor No No Yes Yes Yes Yes Yes Yes
1/1/1 partner No No Yes Yes Yes Yes Yes No
1/1/7 actor No No Yes Yes Yes Yes Yes Yes
1/1/7 partner No No Yes Yes Yes Yes Yes No
===============================================================================
*A:PE4-M2>show#
Label |
Description |
|---|---|
LAG ID |
The LAG or multi-link trunk (MLT) that the port is assigned to. |
Adm |
Up The LAG is administratively up. Down The LAG is administratively down. |
Port Threshold |
If the number of available links is equal or below this number, the threshold action is executed. |
Thres. Last Cleared |
The last time that keepalive stats were cleared. |
Dynamic Cost |
The OSPF costing of a link aggregation group based on the available aggregated, operational bandwidth. |
Configured Address |
The base chassis Ethernet MAC address. |
Hardware Address |
The hardware address. |
Hold-Time Down |
The timer, in tenths of seconds, which controls the delay between detecting that a LAG is down and reporting it to the higher levels. |
LACP |
Enabled LACP is enabled. |
Down LACP is disabled. |
|
LACP Transmit Intvl |
LACP timeout signaled to peer. |
Selection Criteria |
Configured subgroup selection criteria. |
Number of subgroups |
Total subgroups in LAG. |
System ID |
System ID used by actor in LACP messages. |
Admin Key |
Configured LAG key. |
Oper Key |
Key used by actor in LACP messages. |
System Priority |
System priority used by actor in LACP messages. |
Prtr System ID |
System ID used by partner in LACP messages. |
Prtr Oper Key |
Key used by partner in LACP messages. |
Prtr System Priority |
System priority used by partner in LACP messages. |
Mode |
LAG in access or network mode. |
Opr |
Up The LAG is operationally up. |
Down The LAG is operationally down. |
|
Port Threshold |
Configured port threshold. |
Thres. Exceeded Cnt |
The number of times that the drop count was reached. |
Threshold Action |
Action to take when the number of available links is equal or below the port threshold. |
Encap Type |
The encapsulation method used to distinguish customer traffic on a LAG. |
Lag-IFIndex |
A box-wide unique number assigned to this interface. |
Port ID |
The specific slot/MDA/port ID. |
(LACP) Mode |
LACP active or passive mode. |
LACP xmit standby |
LACP transmits on standby links enabled or disabled. |
Slave-to-partner |
Configured enabled or disabled. |
Port-id |
Displays the member port ID. |
Adm |
Displays the member port administrative state. |
Active/stdby |
Indicates that the member port is selected as the active or standby link. |
Opr |
Indicates the member port is in the operational state. |
Primary |
Indicates that the member port is the primary port of the LAG. |
Sub-group |
Displays the member subgroup where the member port belongs to. |
Priority |
Displays the member port priority. |
ALA-1# show lag statistics
===============================================================================
LAG Statistics
===============================================================================
Description:
Lag-id Port-id Input Input Output Output Input Output
Bytes Packets Bytes Packets Errors Errors
-------------------------------------------------------------------------------
1 1/1/3 0 1006 0 2494 0 0
1/1/4 0 435 0 401 0 0
1/1/5 0 9968 0 9833 0 0
-------------------------------------------------------------------------------
Totals 0 11409 0 12728 0 0
===============================================================================
ALA-1#
Label |
Description |
|---|---|
LAG ID |
The LAG or multi-link trunk (MLT) that the port is assigned to. |
Port ID |
The port ID configured or displayed in the slot/mda/port format. |
Input Bytes |
The number of incoming bytes for the LAG on a per-port basis. |
Input Packets |
The number of incoming packets for the LAG on a per-port basis. |
Output Bytes |
The number of outbound bytes for the LAG on a per-port basis. |
Output Packets |
The number of outbound packets for the LAG on a per-port basis. |
Input/Output Errors |
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
Totals |
Displays the column totals for bytes, packets, and errors. |
A:ALA-1# show lag 5 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId Name Encap Val
------------------------------------------------------------------------------
Router: Base LAG2West 0
------------------------------------------------------------------------------
Interfaces
==============================================================================
A:ALA-1#
Label |
Description |
|---|---|
Service ID |
The service associated with the LAG. |
Name |
The name of the IP interface. |
Encap Val |
The values of the port for the IP interface. |
*A:pc5# show lag 2 detail
===============================================================================
LAG Details
===============================================================================
Description:
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 2 Mode : access
Adm : up Opr : up
Thres. Exceeded Cnt : 4 Port Threshold : 0
Thres. Last Cleared : 04/11/2007 02:03:49 Threshold Action : down
Dynamic Cost : false Encap Type : dot1q
Configured Address : 8e:8b:ff:00:01:42 Lag-IfIndex :
1342177282
Hardware Address : 8e:8b:ff:00:01:42 Adapt Qos :
distribute
Hold-time Down : 0.0 sec
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 2 Forced : -
System Id : 8e:8b:ff:00:00:00 System Priority : 32768
Admin Key : 32768 Oper Key : 32768
Prtr System Id : 8e:89:ff:00:00:00 Prtr System Priority : 32768
Prtr Oper Key : 32768
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced
Prio
-------------------------------------------------------------------------------
1/1/1 up active up yes 7 - 99
1/1/2 up standby down 8 - 100
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout
Activity
-------------------------------------------------------------------------------
1/1/1 actor No No Yes Yes Yes Yes Yes Yes
1/1/1 partner No No Yes Yes Yes Yes Yes Yes
1/1/2 actor No No No No No Yes Yes Yes
1/1/2 partner No No No No Yes Yes Yes Yes
===============================================================================
Label |
Description |
|---|---|
Lag-id |
The LAG identifier |
Mode |
The mode of the LAG: access or network |
Adm |
Up: the LAG is administratively up |
Down: the LAG is administratively down |
|
Opr |
Up: the LAG is operationally up |
Down: the LAG is operationally down |
|
Thres. Exceeded Cnt |
The number of times that the drop count was reached |
Port Threshold |
The number of operational links at or below which the LAG is regarded as operationally down. |
Thres. Last Cleared |
The last time that keepalive statistics were cleared. |
Threshold Action |
Action to take when the number of operational links is equal to or below the port threshold. |
Dynamic Cost |
n/a |
Encap Type |
The encapsulation method used to distinguish customer traffic on a LAG. |
Configured Address |
The base chassis Ethernet MAC address. |
Lag-IfIndex |
A unique number assigned to this interface. |
Hardware Address |
The hardware address. |
Adapt Qos |
The configured QoS mode. |
Hold-time Down |
The hold-time, in tenths of seconds, before a failure is reported to higher levels. |
Port Type |
Standard: standard Ethernet port types are supported. |
LACP |
Enabled LACP is enabled. |
Disabled LACP is disabled. |
|
Mode |
Active LACP operates in active mode. |
Passive LACP operates in passive mode. |
|
Role |
Actor Local device (7705 SAR) participating in LACP negotiation. |
Partner Remote device participating in LACP negotiation. |
|
LACP Transmit Intvl |
LACP timeout signaled to peer. |
LACP xmit stdby |
LACP transmit on standby links enabled or disabled. |
Selection Criteria |
Configured subgroup selection criteria. |
Slave-to-partner |
Slave-to-partner flag enabled or disabled. |
Number of sub-groups |
Total subgroups in LAG. |
Forced |
n/a |
System Id |
System ID used by actor in LACP messages. |
System Priority |
System priority used by actor in LACP messages. |
Admin Key |
Configured LAG key. |
Oper Key |
Key used by actor in LACP messages. |
Prtr System Id |
System ID used by partner in LACP messages. |
Prtr System Priority |
System priority used by partner in LACP messages. |
Prtr Oper Key |
The key used by partner in LACP messages. |
Port-id |
The member physical port ID expressed in slot/mda/port format. |
Adm |
Up The member port is administratively up. |
Down The member port is administratively down. |
|
Act/Stdby |
Active The member port is active. |
Standby The member port is on standby. |
|
Opr |
Up The member port is operationally up. |
Down The member port is operationally down. |
|
Primary |
Indicates whether the member port is the primary port. |
Sub-group |
The member port subgroup. |
Prio |
The member port priority. |
redundancy
show
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
Commands in this context display multi-chassis redundancy information.
all
mc-lag peer ip-address [lag lag-id]
mc-lag [peer ip-address [lag lag-id]] statistics
sync peer [ip-address]
sync peer [ip-address] detail
sync peer [ip-address] statistics
show>redundancy
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command displays multi-chassis redundancy information.
Displays all multi-chassis information.
Displays multi-chassis LAG information.
Displays the address of the multi-chassis peer.
Displays the specified LAG ID on this system that forms an multi-chassis LAG configuration with the indicated peer.
Displays statistics for the multi-chassis peer.
Displays synchronization information.
Displays more information.
The following output is an example of multi-chassis redundancy information, and Table: Output fields: show multi-chassis describes the output fields.
Sample output*A:SAS# show redundancy multi-chassis mc-lag peer 3.3.3.3
===============================================================================
Multi-Chassis MC-Lag Peer 3.3.3.3
===============================================================================
Last State chg : 08/31/2014 07:07:48
Admin State : Up Oper State : Up
KeepAlive : 10 deci-seconds Hold On Ngbr Failure : 3
-------------------------------------------------------------------------------
Lag Id Lacp Remote System Id Sys Last State Changed
Key Lag Id Prio
-------------------------------------------------------------------------------
25 0 1 0 08/31/2014 07:20:10
-------------------------------------------------------------------------------
Number of LAGs : 1
*A:SAS# show redundancy multi-chassis all
===============================================================================
Multi-Chassis Peers
===============================================================================
Peer IP Peer Admin Client Admin Oper State
Src IP Auth
-------------------------------------------------------------------------------
3.3.3.3 Enabled MC-Sync: -- -- --
2.2.2.2 hash2 MC-Ring: -- -- --
MC-Endpt: -- -- --
MC-Lag: Enabled Enabled --
*A:SAS# show redundancy multi-chassis sync peer 10.3.3.3
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.3.3.3
Description : (Not Specified)
Authentication : Enabled
Source IP Address : 10.2.2.2
Admin State : Enabled
-------------------------------------------------------------------------------
Sync: Not-configured
-------------------------------------------------------------------------------
===============================================================================
*A:SAS# show redundancy multi-chassis sync peer 3.3.3.3 detail
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.3.3.3
Description : (Not Specified)
Authentication : Enabled
Source IP Address : 10.2.2.2
Admin State : Enabled
-------------------------------------------------------------------------------
Sync: Not-configured
-------------------------------------------------------------------------------
===============================================================================
Ports synced on peer 10.3.3.3
===============================================================================
Port/Encap Tag
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
DHCP Server instances synced on peer 10.3.3.3
===============================================================================
Router-Name Server-Name
Tag
-------------------------------------------------------------------------------
No instances found
===============================================================================
Label |
Description |
|---|---|
Peer IP |
Displays the multi-chassis redundancy peer IP address |
Src IP |
Displays the source IP address used to communicate with the multi-chassis peer |
Auth |
If configured, displays the authentication key used between this node and the multi-chassis peer |
mac-lag peer ip-address [lag lag-id]
mac-lag [peer ip-address [lag lag-id]] statistics
show>redundancy>multi-chassis
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command displays multi-chassis LAG information.
Specifies the peer IP address for which to display multi-chassis LAG information.
Displays information about the specified LAG ID
Displays LAG statistics information.
The following output is an example of multi-chassis LAG information, and Table: Output fields: MC-LAG describes the output fields.
Sample output*7210-SAS>show>redundancy>multi-chassis# mc-lag peer 1.1.1.1
===============================================================================
Multi-Chassis MC-Lag Peer 1.1.1.1
===============================================================================
Last State chg : 08/13/2011 09:02:31
Admin State : Down Oper State : Down
KeepAlive : 10 deci-seconds Hold On Ngbr Failure : 3
-------------------------------------------------------------------------------
Lag Id Lacp Remote System Id Sys Last State Changed
Key Lag Id Prio
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No LAGs found
===============================================================================
*7210-SAS>show>redundancy>multi-chassis# ^C
*A:SAS# show redundancy multi-chassis mc-lag peer 3.3.3.3 statistics
===============================================================================
Multi-Chassis Statistics, Peer 3.3.3.3
===============================================================================
Packets Rx : 8333
Packets Rx Keepalive : 8321
Packets Rx Config : 1
Packets Rx Peer Config : 2
Packets Rx State : 9
Packets Dropped State Disabled : 0
Packets Dropped Packets Too Short : 0
Packets Dropped Tlv Invalid Size : 0
Packets Dropped Tlv Invalid LagId : 0
Packets Dropped Out of Seq : 0
Packets Dropped Unknown Tlv : 0
Packets Dropped MD5 : 0
Packets Tx : 9229
Packets Tx Keepalive : 8705
Packets Tx Peer Config : 509
Packets Tx Failed : 1
============================================================================
Label |
Description |
|---|---|
Last State chg |
Displays date and time of the last state change for the MC-LAG peer |
Admin State |
Displays the administrative state of the MC-LAG peer |
KeepAlive |
Displays the time interval between keepalive messages exchanged between peers |
Oper State |
Displays the operational state of the MC-LAG peer |
Hold On Ngbr Failure |
Displays how many keep alive intervals the standby will wait for packets from the active node before assuming a redundant neighbor node failure |
Lag Id |
Displays the LAG identifier, expressed as a decimal integer |
Lacp Key |
Displays the 16-bit Lacp key |
Remote system Id |
Displays the LAG identifier of the remote system, expressed as a decimal integer |
Multi-Chassis Statistics |
|
Packets Rx |
Displays the number of MC-LAG packets received from the peer |
Packets Rx Keepalive |
Displays the number of MC-LAG keepalive packets received from the peer |
Packets Rx Config |
Displays the number of MC-LAG configured packets received from the peer |
Packets Rx Peer Config |
Displays the number of MC-LAG packets configured by the peer |
Packets Rx State |
Displays the number of received MC-LAG ‟lag” state packets received from the peer |
Packets Dropped State Disabled |
Displays the number of packets that were dropped because the peer was administratively disabled |
Packets Dropped Packets Too Short |
Displays the number of packets that were dropped because the packet was too short |
Packets Dropped Tlv Invalid Size |
Displays the number of packets that were dropped because the packet size was invalid |
Packets Dropped Tlv Invalid LagId |
Displays the number of packets that were dropped because the packet referred to an invalid or non-multi-chassis LAG |
Packets Dropped Out of Seq |
Displays the number of packets that were dropped because the packet was out of sequence |
Packets Dropped Unknown Tlv |
Displays the number of packets that were dropped because the packet contained an unknown TLV |
Packets Dropped MD5 |
Displays the number of packets that were dropped because the packet failed MD5 authentication |
Packets Tx |
Displays the number of packets transmitted from this system to the peer |
Packets Tx Keepalive |
Displays the number of keepalive packets transmitted from this system to the peer |
Packets Tx Peer Config |
Displays the number of configured packets transmitted from this system to the peer |
Packets Tx Failed |
Displays the number of packets that failed to be transmitted from this system to the peer |