port port-id [count] [detail]
port port-id description
port port-id associations
port port-id ethernet [efm-oam | detail]
port port-id optical
port port-id dot1x [detail]
port port-id vport [vport-name] associations
port [A1] [detail] [statistics] [description]
show
Supported on all 7210 SAS platforms as described in this document.
This command displays port information.
If no command line options are specified, the command port displays summary information for all ports on provisioned MDAs.
The out-of-band Ethernet port is not supported on 7210 SAS-D and 7210 SAS-Dxp platforms.
Specifies the physical port ID in the form slot/mda/port.
Displays a list of current router interfaces to which the port is associated.
Displays port description strings.
Displays information.about 802.1x status and statistics.
Displays Ethernet port information.
efm-oam — Displays EFM OAM information.
detail — Displays detailed information about the Ethernet port.
Displays optical port DDM information retrieved from the cache, which is updated periodically only for ports that are operationally up or operationally down because of loss of Rx signal.
The following outputs are examples of port information, and the associated tables describe the output fields.
Sample output for 7210 SAS-D, Table: Output fields: show general port
Sample output for 7210 SAS-K 2F1C2T and 7210 SAS-K 2F6C4T, Table: Output fields: show general port
Sample output for 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C, Table: Output fields: show general port
Sample output Ethernet , Table: Output fields: show specific port and Table: Output fields: show port detail
Sample output for 7210 SAS-D, Table: Output fields: show specific port and Table: Output fields: show port detail
Sample output for 7210 SAS-D Ethernet, Table: Output fields: show specific port and Table: Output fields: show port detail
Sample output for 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C, Table: Output fields: show specific port and Table: Output fields: show port detail
Sample output port associations, Table: Output fields: port associations
Sample output A1 detailed, Table: Output fields: show A1 detailed
Sample output for dot1x detail, Sample output - optical , Table: Output fields: optical
*A:ALU-211# show port 1/1/2
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100 Ethernet TX
Interface : 1/1/2 Oper Speed : 100 mbps
Link-level : Ethernet Config Speed : 100 mbps
Admin State : up Oper Duplex : full
Oper State : up - Active in LAG 10 Config Duplex : full
Physical Link : Yes MTU : 1514
Single Fiber Mode : No : Internal
IfIndex : 35717120 Hold time up : 0 seconds
Last State Change : 12/16/2008 19:31:40 Hold time down : 0 seconds
Last Cleared Time : 12/16/2008 19:31:48
IP MTU : 1000
===============================================================================
*A:ALU-211#
*A:ALU-211# show port 1/1/2
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100 Ethernet TX
Interface : 1/1/2 Oper Speed : 100 mbps
Link-level : Ethernet Config Speed : 100 mbps
Admin State : up Oper Duplex : full
Oper State : down - Standby in LAG 10 Config Duplex : full
Physical Link : Yes MTU : 1514
Single Fiber Mode : No : None
IfIndex : 35717120 Hold time up : 0 seconds
Last State Change : 12/16/2008 18:28:52 Hold time down : 0 seconds
Last Cleared Time : 12/16/2008 18:28:51
IP MTU : 1000
===============================================================================
*A:ALU-211#
*A:SAH01-051>show# port 1/1/3
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet Combo
Interface : 1/1/3 Oper Speed : N/A
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : N/A
Oper State : down Config Duplex : full
Oper Grp : disabled Monitor Oper Grp : disabled
Physical Link : No MTU : 1514
Config Conn Type : Auto-SFP Oper Conn Type : N/A
Single Fiber Mode : No LoopBack Mode : None
IfIndex : 35749888 Hold time up : 0 seconds
Last State Change : 01/16/2014 03:19:32 Hold time down : 0 seconds
Last Cleared Time : 01/16/2014 03:12:24
Phys State Chng Cnt: 0
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Auto-negotiate : limited MDI/MDX : unknown
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled DEI Classificati*: Disabled
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Tx DUS/DNU : Disabled Tx Quality Level : N/A
SSM Code Type : sdh
Down On Int. Error : Disabled
CRC Mon SD Thresh : Disabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Disabled
Configured Address : 00:03:fa:27:15:52
Hardware Address : 00:03:fa:27:15:52
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show# ^C
*A:SAH01-051>show# port 1/1/3 de
detail description
*A:SAH01-051>show# port 1/1/3 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet Combo
Interface : 1/1/3 Oper Speed : N/A
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : N/A
Oper State : down Config Duplex : full
Oper Grp : disabled Monitor Oper Grp : disabled
Physical Link : No MTU : 1514
Config Conn Type : Auto-SFP Oper Conn Type : N/A
Single Fiber Mode : No LoopBack Mode : None
IfIndex : 35749888 Hold time up : 0 seconds
Last State Change : 01/16/2014 03:19:32 Hold time down : 0 seconds
Last Cleared Time : 01/16/2014 03:12:24
Phys State Chng Cnt: 0
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Auto-negotiate : limited MDI/MDX : unknown
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled DEI Classificati*: Disabled
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Tx DUS/DNU : Disabled Tx Quality Level : N/A
SSM Code Type : sdh
Down On Int. Error : Disabled
CRC Mon SD Thresh : Disabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Disabled
Configured Address : 00:03:fa:27:15:52
Hardware Address : 00:03:fa:27:15:52
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
Multicast Pckts : 0 CRC/Align Errors : 0
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 0
Packets : 0
Packets of 64 Octets : 0
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 0
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 0
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:SAH01-051>show#
*A:SAH01-051>show# port 1/1/3
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet Combo
Interface : 1/1/3 Oper Speed : N/A
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : N/A
Oper State : down Config Duplex : full
Oper Grp : disabled Monitor Oper Grp : disabled
Physical Link : No MTU : 1514
Config Conn Type : Auto-SFP Oper Conn Type : N/A
Single Fiber Mode : No LoopBack Mode : None
IfIndex : 35749888 Hold time up : 0 seconds
Last State Change : 01/16/2014 03:19:32 Hold time down : 0 seconds
Last Cleared Time : 01/16/2014 03:12:24
Phys State Chng Cnt: 0
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Auto-negotiate : limited MDI/MDX : unknown
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled DEI Classificati*: Disabled
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Tx DUS/DNU : Disabled Tx Quality Level : N/A
SSM Code Type : sdh
Down On Int. Error : Disabled
CRC Mon SD Thresh : Disabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Disabled
Configured Address : 00:03:fa:27:15:52
Hardware Address : 00:03:fa:27:15:52
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show#
*A:SAH01-051>show# ^C
*A:SAH01-051>show# port 1/1/3 de
detail description
*A:SAH01-051>show# port 1/1/3 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet Combo
Interface : 1/1/3 Oper Speed : N/A
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : N/A
Oper State : down Config Duplex : full
Oper Grp : disabled Monitor Oper Grp : disabled
Physical Link : No MTU : 1514
Config Conn Type : Auto-SFP Oper Conn Type : N/A
Single Fiber Mode : No LoopBack Mode : None
IfIndex : 35749888 Hold time up : 0 seconds
Last State Change : 01/16/2014 03:19:32 Hold time down : 0 seconds
Last Cleared Time : 01/16/2014 03:12:24
Phys State Chng Cnt: 0
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Auto-negotiate : limited MDI/MDX : unknown
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled DEI Classificati*: Disabled
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Tx DUS/DNU : Disabled Tx Quality Level : N/A
SSM Code Type : sdh
Down On Int. Error : Disabled
CRC Mon SD Thresh : Disabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Disabled
Configured Address : 00:03:fa:27:15:52
Hardware Address : 00:03:fa:27:15:52
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
Multicast Pckts : 0 CRC/Align Errors : 0
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 0
Packets : 0
Packets of 64 Octets : 0
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 0
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 0
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:SAH01-051>show#
*A:7210SAS>show# port 1/1/2 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet SFP
Interface : 1/1/2 Oper Speed : 1 Gbps
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : full
Oper State : up Config Duplex : full
Physical Link : Yes MTU : 1518
Single Fiber Mode : No LoopBack Mode : Internal
IfIndex : 35717120 Hold time up : 0 seconds
Last State Change : 01/01/1970 00:18:10 Hold time down : 0 seconds
Last Cleared Time : N/A DDM Events : Enabled
Configured Mode : access Encap Type : 802.1q
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Ing. Pool Policy : n/a
Egr. Pool Policy : n/a
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Egr. Sched. Pol : default Access Egr. Qos *: 1
Acc Egr Marking : Port-Based Acc Egr Policy ID: 1
Auto-negotiate : true MDI/MDX : MDI
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled
Uplink : No
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Code-Type : SDH Tx Quality Level : N/A
Tx DUS/DNU : Disabled
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:12:ab:34:cd:59
Hardware Address : 00:12:ab:34:cd:59
Cfg Alarm :
Alarm Status :
Transceiver Data
Transceiver Type : SFP
Model Number : 3HE00027AAAA02 ALA IPUIAELDAB
TX Laser Wavelength: 850 nm Diag Capable : yes
Connector Code : LC Vendor OUI : 00:90:65
Manufacture date : 2010/06/14 Media : Ethernet
Serial Number : PHR06BD
Part Number : FTRJ8519P2BNL-A6
Optical Compliance : GIGE-SX
Link Length support: 550m for 50u MMF; 300m for 62.5u MMF
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
Value High Alarm High Warn Low Warn Low Alarm
-------------------------------------------------------------------------------
Temperature (C) +26.8 +95.0 +90.0 -20.0 -25.0
Supply Voltage (V) 3.27 3.90 3.70 2.90 2.70
Tx Bias Current (mA) 6.9 17.0 14.0 2.0 1.0
Tx Output Power (dBm) -4.39 -2.00 -2.00 -11.02 -11.74
Rx Optical Power (avg dBm) -7.24 1.00 -1.00 -18.01 -20.00
===============================================================================
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
Multicast Pckts : 0 CRC/Align Errors : 0
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 0
Packets : 0
Packets of 64 Octets : 0
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 0
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 0
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
===============================================================================
Queue Statistics
===============================================================================
-------------------------------------------------------------------------------
Packets Octets
-------------------------------------------------------------------------------
Egress Queue 1 (be)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 2 (l2)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 3 (af)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 4 (l1)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 5 (h2)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 6 (ef)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 7 (h1)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 8 (nc)
Fwd Stats : 0 0
Drop Stats : 0 0
===============================================================================
*A:7210SAS>show#
Entering port ranges:
*A:7210SAS# show port
==============================================================================
Ports on Slot 1
==============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port SFP/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
------------------------------------------------------------------------------
1/1/1 Down No Down 1514 1514 - accs null xcme
1/1/2 Up Yes Up 1518 1518 - accs dotq xcme MDI GIGE-SX
1/1/3 Up No Down 1518 1518 - accs dotq xcme
1/1/4 Up No Down 1514 1514 - accs null xcme
1/1/5 Up Yes Up 1518 1518 - accs dotq xcme MDI GIGE-T
1/1/6 Down No Down 1514 1514 - accs null xcme
1/1/7 Down No Down 1514 1514 - accs null xcme
1/1/8 Down No Down 1514 1514 - accs null xcme
1/1/9 Up Yes Up 1522 1522 - l2up qinq xcme MDX
1/1/10 Up Yes Up 1522 1522 - l2up qinq xcme MDI
==============================================================================
*A:7210SAS#
Label |
Description |
|---|---|
Port ID |
Displays the port ID configured or displayed in the slot/mda/port format |
Admin State |
Up — The administrative state is up Down — The administrative state is down |
Link |
Yes — A physical link is present No — A physical link is not present |
Port State |
Up — The port is physically present and has a physical link present Down — The port is physically present but does not have a link Ghost — The port is not physically present None — The port is in its initial creation state or about to be deleted Link Up — The port is physically present and has a physical link present Link Down — The port is physically present but does not have a link |
Cfg MTU |
Displays the configured MTU |
Oper MTU |
Displays the negotiated size of the largest packet which can be sent on the port specified in octets |
LAG ID |
Displays the LAG or multi-link trunk (MLT) that the port is assigned to |
Port Mode |
network — The port is configured for transport network use access — The port is configured for service access |
Port Encap |
Null — Ingress frames do not use tags or labels to delineate a service dot1q — Ingress frames carry 802.1Q tags where each tag signifies a different service |
Port Type |
Displays the type of port or optics installed |
SFP/MDI MDX |
GIG3 — Indicates the GigE SFP type FASTE — Indicates the Fast Ethernet SFP type MDI — Indicates that the Ethernet interface is of type MDI (Media Dependent Interface) MDX — Indicates that the Ethernet interface is of type MDX (Media Dependent Interface with crossovers) |
IP MTU |
Displays the configured IP MTU value |
*A:SN12345678# show port 1/1/15
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet TX
Interface : 1/1/15 Oper Speed : 1 Gbps
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : full
Oper State : up Config Duplex : full
Physical Link : Yes MTU : 1522
IfIndex : 36143104 Hold time up : 0 seconds
Last State Change : 03/19/2001 21:21:07 Hold time down : 0 seconds
Last Cleared Time : N/A
IP MTU : 1000
Configured Mode : access Encap Type : QinQ
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Net. Egr. Queue Pol: default Access Egr. Qos *: n/a
Egr. Sched. Pol : default Network Qos Pol : 1
Auto-negotiate : limited MDI/MDX : MDI
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Ingress Rate : Default
Uplink : Yes
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:87:98:76:65:0e
Hardware Address : 00:87:98:76:65:0e
Cfg Alarm :
Alarm Status :
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 2229540275006 0
Packets 2177285416 0
Errors 14 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 2177285416 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 13 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:SN12345678#
*A:SN12345678# show port 1/1/15 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet TX
Interface : 1/1/15 Oper Speed : 1 Gbps
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : full
Oper State : up Config Duplex : full
Physical Link : Yes MTU : 1522
IfIndex : 36143104 Hold time up : 0 seconds
Last State Change : 03/19/2001 21:21:07 Hold time down : 0 seconds
Last Cleared Time : N/A
Configured Mode : access Encap Type : QinQ
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Net. Egr. Queue Pol: default Access Egr. Qos *: n/a
Egr. Sched. Pol : default Network Qos Pol : 1
Auto-negotiate : limited MDI/MDX : MDI
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Ingress Rate : Default
Uplink : Yes
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:87:98:76:65:0e
Hardware Address : 00:87:98:76:65:0e
Cfg Alarm :
Alarm Status :
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 2199575527230 0
Packets 2148022967 0
Errors 14 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
Multicast Pckts : 0 CRC/Align Errors : 13
Undersize Pckts : 0 Fragments : 1
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 2199575527230
Packets : 2148022967
Packets of 64 Octets : 0
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 1
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 12
Packets of 1024 to 1518 Octets : 2148022966
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 2148272026 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 13 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
Meter Statistics
===============================================================================
-------------------------------------------------------------------------------
Packets Octets
-------------------------------------------------------------------------------
Ingress Meter 1 (Unicast)
For. InProf : 0 0
For. OutProf : 0 0
Ingress Meter 9 (Multipoint)
For. InProf : 0 0
For. OutProf : 0 0
===============================================================================
*A:SN12345678#
*A:SAS-D>config# show port 1/1/2
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet SFP
Interface : 1/1/2 Oper Speed : N/A
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : down Oper Duplex : N/A
Oper State : down Config Duplex : full
Physical Link : No MTU : 1514
Single Fiber Mode : No
IfIndex : 35717120 Hold time up : 0 seconds
Last State Change : 01/01/1970 00:00:08 Hold time down : 0 seconds
Last Cleared Time : N/A DDM Events : Enabled
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Ing. Pool Policy : n/a
Egr. Pool Policy : n/a
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Egr. Sched. Pol : default Access Egr. Qos *: 1
Auto-negotiate : true MDI/MDX : unknown
Port-clock : master
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
Load-balance-algo : default LACP Tunnel : Disabled
LACP Tunnel : Disabled
Uplink : No
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Code-Type : SDH Tx Quality Level : N/A
Tx DUS/DNU : Disabled
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:3f:11:ab:ca:14
Hardware Address : 00:3f:11:ab:ca:14
Cfg Alarm :
Alarm Status :
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:ALA-A# show port 1/1/1 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet SFP
Interface : 1/1/1 Oper Speed : 0 mbps
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : N/A
Oper State : down Config Duplex : full
Reason Down : linkLossFwd
Physical Link : No MTU : 1514
IfIndex : 35684352 Hold time up : 0 seconds
Last State Change : 01/22/2010 23:54:49 Hold time down : 0 seconds
Last Cleared Time : 01/21/2010 17:40:16
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Net. Egr. Queue Pol: default Access Egr. Qos *: 1
Egr. Sched. Pol : default Network Qos Pol : n/a
Auto-negotiate : false MDI/MDX : unknown
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
Uplink : No
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 28:06:01:01:00:01
Hardware Address : 28:06:01:01:00:01
Cfg Alarm :
Alarm Status :
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
0 Pckts : 0 CRC/Align Errors :
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 0
Packets : 0
Packets of 64 Octets : 0
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 0
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 0
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-A#
*A:SAS-D>config# show port 1/1/2 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet SFP
Interface : 1/1/2 Oper Speed : N/A
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : down Oper Duplex : N/A
Oper State : down Config Duplex : full
Physical Link : No MTU : 1514
Single Fiber Mode : No
IfIndex : 35717120 Hold time up : 0 seconds
Last State Change : 01/01/1970 00:00:08 Hold time down : 0 seconds
Last Cleared Time : N/A DDM Events : Enabled
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Ing. Pool Policy : n/a
Egr. Pool Policy : n/a
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Egr. Sched. Pol : default Access Egr. Qos *: 1
Auto-negotiate : true MDI/MDX : unknown
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
Load-balance-algo : default LACP Tunnel : Disabled
LACP Tunnel : Disabled
Uplink : No
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Code-Type : SDH Tx Quality Level : N/A
Tx DUS/DNU : Disabled
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:3f:11:ab:ca:14
Hardware Address : 00:3f:11:ab:ca:14
Cfg Alarm :
Alarm Status :
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
Multicast Pckts : 0 CRC/Align Errors : 0
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 0
Packets : 0
Packets of 64 Octets : 0
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 0
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 0
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
===============================================================================
Queue Statistics
===============================================================================
-------------------------------------------------------------------------------
Packets Octets
-------------------------------------------------------------------------------
Egress Queue 1 (be)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 2 (l2)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 3 (af)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 4 (l1)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 5 (h2)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 6 (ef)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 7 (h1)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 8 (nc)
Fwd Stats : 0 0
Drop Stats : 0 0
===============================================================================
*7210SAS-D># show port 1/1/3 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet SFP
Interface : 1/1/3 Oper Speed : 1 Gbps
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : full
Oper State : up Config Duplex : full
Physical Link : Yes MTU : 1514
Single Fiber Mode : No LoopBack Mode : None
IfIndex : 35749888 Hold time up : 0 seconds
Last State Change : 01/01/1970 00:15:29 Hold time down : 0 seconds
Last Cleared Time : N/A DDM Events : Enabled
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7 Acc Egr Sch Mode : Fc-Based
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Ing. Pool Policy : n/a
Egr. Pool Policy : n/a
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Egr. Sched. Pol : default Access Egr. Qos *: 1
Auto-negotiate : true MDI/MDX : MDI
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled
Uplink : No
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Enabled Rx Quality Level : 0x2(prc)
Code-Type : SDH Tx Quality Level : 0xf(dnu)
Tx DUS/DNU : Disabled
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:32:fb:04:1a:04
Hardware Address : 00:32:fb:04:1a:04
Cfg Alarm :
Alarm Status :
Transceiver Data
Transceiver Type : SFP
Model Number : 3HE00027AAAA02 ALA IPUIAELDAB
TX Laser Wavelength: 850 nm Diag Capable : yes
Connector Code : LC Vendor OUI : 00:90:65
Manufacture date : 2010/06/02 Media : Ethernet
Serial Number : PHP2JMJ
Part Number : FTRJ8519P2BNL-A6
Optical Compliance : GIGE-SX
Link Length support: 550m for 50u MMF; 300m for 62.5u MMF
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
Value High Alarm High Warn Low Warn Low Alarm
-------------------------------------------------------------------------------
Temperature (C) +44.9 +95.0 +90.0 -20.0 -25.0
Supply Voltage (V) 3.30 3.90 3.70 2.90 2.70
Tx Bias Current (mA) 6.8 17.0 14.0 2.0 1.0
Tx Output Power (dBm) -4.71 -2.00 -2.00 -11.02 -11.74
Rx Optical Power (avg dBm) -5.18 1.00 -1.00 -18.01 -20.00
===============================================================================
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 30976 30720
Packets 308 304
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 0 Drop Events : 0
Multicast Pckts : 612 CRC/Align Errors : 0
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 61696
Packets : 612
Packets of 64 Octets : 260
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 352
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 0
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 308 304
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
===============================================================================
Queue Statistics
===============================================================================
-------------------------------------------------------------------------------
Packets Octets
-------------------------------------------------------------------------------
Egress Queue 1 (be)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 2 (l2)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 3 (af)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 4 (l1)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 5 (h2)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 6 (ef)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 7 (h1)
Fwd Stats : 0 0
Drop Stats : 0 0
Egress Queue 8 (nc)
Fwd Stats : 0 0
Drop Stats : 0 0
===============================================================================
*A:SAH01-051>show# port
===============================================================================
Ports on Slot 1
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
1/1/1 Up Yes Up 1514 1514 - accs null xcme MDX GIGE-T
1/1/2 Down No Down 1514 1514 - accs null xcme
1/1/3 Up No Down 1514 1514 - accs null xcme COMBO
1/1/4 Up Yes Up 1514 1514 - accs null xcme MDI
1/1/5 Up Yes Up 1514 1514 - accs null xcme MDI
===============================================================================
*A:SAH01-051>show# port 1/1/1 ethernet
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100/Gig Ethernet SFP
Interface : 1/1/1 Oper Speed : 1 Gbps
Link-level : Ethernet Config Speed : 1 Gbps
Admin State : up Oper Duplex : full
Oper State : up Config Duplex : full
Oper Grp : disabled Monitor Oper Grp : disabled
Physical Link : Yes MTU : 1514
Config Conn Type : SFP Oper Conn Type : SFP
Single Fiber Mode : No LoopBack Mode : None
IfIndex : 35684352 Hold time up : 0 seconds
Last State Change : 01/16/2014 03:26:46 Hold time down : 0 seconds
Last Cleared Time : N/A DDM Events : Enabled
Phys State Chng Cnt: 5
Configured Mode : access Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Net. Egr. Queue Pol: default Network Qos Pol : n/a
Auto-negotiate : true MDI/MDX : MDX
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
LACP Tunnel : Disabled DEI Classificati*: Disabled
Split Horizon Group: (Not Specified)
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Tx DUS/DNU : Disabled Tx Quality Level : N/A
SSM Code Type : sdh
Down On Int. Error : Disabled
CRC Mon SD Thresh : Disabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Disabled
Configured Address : 00:03:fa:27:15:50
Hardware Address : 00:03:fa:27:15:50
Transceiver Data
Transceiver Type : SFP
Model Number : 3HE00062AAAA01 ALA IPUIAEHDAA
TX Laser Wavelength: 0 nm Diag Capable : no
Connector Code : Unknown Vendor OUI : 90:00:00
Manufacture date : 2011/08/09 Media : Ethernet
Serial Number : PL71FG4
Part Number : FCMJ-8521-3-A5
Optical Compliance : GIGE-T
Link Length support: 100m for copper
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 1889792832 38756224
Packets 29528013 605566
Errors 0 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 1577678 605566
Multicast Packets 0 0
Broadcast Packets 27950335 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:SAH01-051>show#
Label |
Description |
|---|---|
Description |
A text description of the port. |
Interface |
The port ID displayed in the slot/mda/port format. |
Speed |
The speed of the interface. |
Link-level |
Ethernet The port is configured as Ethernet. |
MTU |
The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. |
LoopBack Mode |
Indicates if the port is in use by loopback mac-swap application. If 'None' is displayed the port is not enabled for loopback testing. If 'Internal' is displayed, the port is in use by port loopback mac-swap application and no services can be configured on this port. This field is displayed only on the 7210 SAS-D sample output. |
Admin State |
Up The port is administratively up. |
Down The port is administratively down. |
|
Oper State |
Up The port is operationally up. |
Down The port is operationally down. |
|
Additionally, the lag-id of the LAG it belongs to in addition to the status of the LAG member (active or standby) is specified. |
|
Duplex |
Full The link is set to full duplex mode. |
Half The link is set to half duplex mode. |
|
Hold time up |
The link up dampening time in seconds. The port link dampening timer value which reduces the number of link transitions reported to upper layer protocols. |
Hold time down |
The link down dampening time in seconds. The down timer controls the dampening timer for link down transitions. |
Physical Link |
Yes A physical link is present. |
No A physical link is not present. |
|
IfIndex |
Displays the interface's index number which reflects its initialization sequence. |
Last State chg |
Displays the system time moment that the peer is up. |
Configured Mode |
network The port is configured for transport network use. |
access The port is configured for service access. |
|
Dot1Q Ethertype |
Indicates the Ethertype expected when the port's encapsulation type is Dot1Q. |
QinQ Ethertype |
Indicates the Ethertype expected when the port's encapsulation type is QinQ. |
Net. Egr. Queue Pol |
Specifies the network egress queue policy or that the default policy is used. |
Access Egr. Qos |
Specifies the access egress policy or that the default policy 1 is in use |
Egr. Sched. Pol |
Specifies the port scheduler policy or that the default policy default is in use |
Encap Type |
Null Ingress frames will not use any tags or labels to delineate a service. |
dot1q Ingress frames carry 802.1Q tags where each tag signifies a different service. |
|
Active Alarms |
The number of alarms outstanding on this port. |
Auto-negotiate |
True The link attempts to automatically negotiate the link speed and duplex parameters. |
False The duplex and speed values are used for the link. |
|
Port-clock |
Displays the mode of the port-clock. The port-clock can be set either as master, slave, or it can be automatic. |
Alarm State |
The current alarm state of the port. |
Collect Stats |
Enabled The collection of accounting and statistical data for the network Ethernet port is enabled. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. |
Disabled The collection of accounting and statistical data for the network Ethernet port is disabled. Statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file. |
|
Configured Address |
The base chassis Ethernet MAC address. |
Hardware Address |
The interface's hardware or system assigned MAC address at its protocol sublayer. |
Transceiver Type |
Type of the transceiver. |
Model Number |
The model number of the transceiver. |
Transceiver Code |
The code for the transmission media. |
Laser Wavelength |
The light wavelength transmitted by the transceiver's laser. |
Connector Code |
The vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. |
Diag Capable |
Indicates if the transceiver is capable of doing diagnostics. |
Vendor OUI |
The vendor-specific identifier field (OUI) contains the IEEE company identifier for the vendor. |
Manufacture date |
The manufacturing date of the hardware component in the mmddyyyy ASCII format. |
Media |
The media supported for the SFP. |
Serial Number |
The vendor serial number of the hardware component. |
Part Number |
The vendor part number contains ASCII characters, defining the vendor part number or product name. |
Input/Output |
When the collection of accounting and statistical data is enabled, the octet, packet, and error statistics are displayed. |
Errors Input/Output |
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
Unicast Packets Input/Output |
The number of packets, delivered by this sublayer to a higher (sub)layer, which were not addressed to a multicast or broadcast address at this sublayer. The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sublayer, including those that were discarded or not sent. |
Multicast Packets Input/Output |
The number of packets, delivered by this sublayer to a higher (sub)layer, which were addressed to a multicast address at this sublayer. For a MAC layer protocol, this includes both group and functional addresses. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sublayer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. |
Broadcast Packets Input/Output |
The number of packets, delivered by this sublayer to a higher (sub)layer, which were addressed to a broadcast address at this sublayer. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sublayer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. |
Discards Input/Output |
The number of inbound packets chosen to be discarded to possibly free up buffer space. |
Unknown Proto Discards Input/Output |
For packet-oriented interfaces, the number of packets received through the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. |
Errors |
This field displays the number of cells discarded because of uncorrectable HEC errors. Errors do not show up in the raw cell counts. |
Sync. Status Msg |
Whether synchronization status messages are enabled or disabled. |
Tx DUS/DNU |
Whether the QL value is forcibly set to QL-DUS/QL-DNU. |
Rx Quality Level |
Indicates which QL value has been received from the interface. |
Tx Quality Level |
Indicates which QL value is being transmitted out of the interface. |
SSM Code Type |
Indicates the SSM code type in use on the port. |
Frame Based Acc |
Indicates if frame-based-accounting is enabled or disabled on the port |
Label |
Description |
|---|---|
Description |
Provides a text description of the port |
Interface |
Displays the port ID in the slot/mda/port format |
Speed |
Displays the speed of the interface |
Link-level |
Ethernet — The port is configured as Ethernet |
MTU |
Displays the size of the largest packet which can be sent or received on the Ethernet physical interface, specified in octets |
Admin State |
Up — The port is administratively up Down — The port is administratively down |
Oper State |
Up — The port is operationally up Down — The port is operationally down |
Duplex |
Full — The link is set to full duplex mode Half — The link is set to half duplex mode |
Hold time up |
Displays the link up dampening time in seconds. The port link dampening timer value reduces the number of link transitions reported to upper layer protocols. |
Hold time down |
Displays the link down dampening time in seconds. The down timer controls the dampening timer for link down transitions. |
IfIndex |
Displays the interface index number, which reflects its initialization sequence |
Phy Link |
Yes — A physical link is present No — A physical link is not present |
Configured Mode |
network — The port is configured for transport network use access — The port is configured for service access |
Network Qos Pol |
Displays the QoS policy ID applied to the port |
Access Egr. Qos |
Specifies the access egress policy or that the default policy 1 is in use |
Egr. Sched. Pol |
Specifies the port scheduler policy or that the default policy default is in use |
Encap Type |
Null — Ingress frames do not use any tags or labels to delineate a service dot1q — Ingress frames carry 802.1Q tags where each tag signifies a different service |
Active Alarms |
Displays the number of alarms outstanding on this port |
Auto-negotiate |
True — The link attempts to automatically negotiate the link speed and duplex parameters False — The duplex and speed values are used for the link |
Alarm State |
Displays the current alarm state of the port |
Collect Stats |
Enabled — The collection of accounting and statistical data for the network Ethernet port is enabled. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. Disabled — Collection is disabled. Statistics are still accumulated by the IOM cards; however, the CPU does not obtain the results and write them to the billing file. |
Down-When-Looped |
Displays whether the feature is enabled or disabled |
Down On Int. Error |
Indicates whether down-on-internal-error is enabled |
CRC Mon SD Thresh |
Indicates whether signal-degrade threshold is configured |
CRC Mon SF Thresh |
Indicates whether signal-fail threshold is configured |
CRC Mon Window |
Displays the value of window size used for CRC error monitoring when the signal-degrade or signal-fail thresholds are configured. |
Egress Rate |
Displays the maximum amount of egress bandwidth (in kilobits per second) that this Ethernet interface can generate |
Configured Address |
Displays the base chassis Ethernet MAC address. |
Hardware Address |
Displays the interface hardware or system assigned MAC address at its protocol sublayer |
Errors Input/Output |
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
Unicast Packets Input/Output |
The number of packets, delivered by this sublayer to a higher (sub)layer, which were not addressed to a multicast or broadcast address at this sublayer. The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sublayer, including those that were discarded or not sent. |
Multicast Packets Input/Output |
The number of packets, delivered by this sublayer to a higher (sub)layer, which were addressed to a multicast address at this sublayer. For a MAC layer protocol, this includes both Group and Functional addresses. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sublayer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. |
Broadcast Packets Input/Output |
The number of packets, delivered by this sublayer to a higher (sub)layer, which were addressed to a broadcast address at this sublayer. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sublayer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. |
Discards Input/Output |
Displays the number of inbound packets chosen to be discarded to possibly free up buffer space |
Unknown Proto Discards Input/Output |
For packet-oriented interfaces, the number of packets received through the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. |
LLF Admin State |
Displays the Link Loss Forwarding administrative state |
LLF Oper State |
Displays the Link Loss Forwarding operational state |
Rx S1 Byte |
Displays the received S1 byte and its decoded QL value |
Tx DUS/DNU |
Displays whether the QL value is forcibly set to QL-DUS/QL-DNU |
Qinq etype |
Displays the Ethertype used for qinq packet encapsulation |
Sync. Status Msg. |
Enabled — If SSM is enabled Disabled — If SSM is disabled |
Code-Type |
Displays the encoding type of SSM messages as SONET or SDH |
Rx Quality Level |
When SSM is enabled on this port, it displays the Clock Quality level for the clock received through that interface. The Clock Quality level is typically sent by the peer in the ESMC/SSM protocol. The quality level shown depends on the quality level mode used (SONET or SDH). |
Tx Quality Level |
When SSM is enabled on this port, it displays the System Clock Quality level that the system advertises to the peer using the ESMC/SSM protocol. The quality level shown depends on the quality level mode used (SONET or SDH). |
A:ALA-1# show port 1/1/6 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId Name Encap Val
------------------------------------------------------------------------------
Router: Base if1000 1000
Router: Base if2000 2000
------------------------------------------------------------------------------
Interfaces
==============================================================================
A;ALA-1#
Label |
Description |
|---|---|
Svc ID |
Displays the service identifier |
Name |
Displays the name of the IP interface |
Encap Value |
Displays the dot1q or qinq encapsulation value on the port for this IP interface |
A:7210>show# port A/1 detail
===============================================================================
Ethernet Interface
===============================================================================
Description : 10/100 Ethernet TX
Interface : A/1 Oper Speed : 10 mbps
Link-level : Ethernet Config Speed : 100 mbps
Admin State : up Oper Duplex : half
Oper State : up Config Duplex : full
Physical Link : Yes MTU : 1514
Single Fiber Mode : No
IfIndex : 67141632 Hold time up : 0 seconds
Last State Change : 07/09/2010 16:30:04 Hold time down : 0 seconds
Last Cleared Time : N/A
Configured Mode : network Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Ing. Pool Policy : n/a
Egr. Pool Policy : n/a
Net. Egr. Queue Pol: Network Qos Pol : n/a
Egr. Sched. Pol : default Access Egr. Qos *: n/a
Egr. Sched. Pol : default
Auto-negotiate : true MDI/MDX : MDI
Accounting Policy : None Collect-stats : Disabled
Egress Rate : Default Max Burst : Default
Split Horizon Group: (Not Specified)
Down-when-looped : N/A Keep-alive : N/A
Loop Detected : N/A Retry : N/A
Use Broadcast Addr : N/A
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Down On Int. Error : Disabled
CRC Mon SD Thresh : Enabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Enabled
Configured Address : 00:aa:01:ab:02:02
Hardware Address : 00:aa:01:ab:02:02
Cfg Alarm :
Alarm Status :
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 5950409 0
Packets 4274 0
Errors 0 0
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts : 38 Drop Events : 0
Multicast Pckts : 0 CRC/Align Errors : 0
Undersize Pckts : 0 Fragments : 0
Oversize Pckts : 0 Jabbers : 0
Collisions : 0
Octets : 6102041
Packets : 4382
Packets of 64 Octets : 34
Packets of 65 to 127 Octets : 0
Packets of 128 to 255 Octets : 366
Packets of 256 to 511 Octets : 0
Packets of 512 to 1023 Octets : 0
Packets of 1024 to 1518 Octets : 3982
Packets of 1519 or more Octets : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 4416 0
Multicast Packets 0 0
Broadcast Packets 38 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
Label |
Description |
|---|---|
Description |
Displays a text description of the port |
Interface |
Displays the port ID displayed in the slot/mda/port format |
Oper Speed |
Displays the operating speed of the interface |
Link-level |
Ethernet — the port is configured as Ethernet |
Config Speed |
Displays the configured speed of the interface |
Admin State |
up The port is administratively up. |
down The port is administratively down. |
|
Oper Duplex |
The operating duplex mode of the interface. |
Oper State |
up The port is operationally up. |
down The port is operationally down. |
|
Config Duplex |
full The link is configured to full duplex mode. |
half The link is configured to half duplex mode. |
|
Physical Link |
Yes A physical link is present. |
No A physical link is not present. |
|
MTU |
The size of the largest packet that can be sent/received on the Ethernet physical interface, specified in octets. |
IfIndex |
The interface index number that reflects its initialization sequence. |
Hold time up |
The link-up dampening time in seconds. The port link dampening timer value that reduces the number of link transitions reported to upper layer protocols. |
Last State Change |
The last time that the operational status of the port changed state. |
Hold time down |
The link-down dampening time in seconds. The down timer controls the dampening timer for link down transitions. |
Configured Mode |
network The port is configured for transport. |
network use access The port is configured for service access. |
|
Encap Type |
null Ingress frames will not use any tags or labels to delineate a service. |
dot1q Ingress frames carry 802.1Q tags where each tag signifies a different service. |
|
Dot1Q Ethertype |
The protocol carried in an Ethernet frame. |
Net.Egr. Queue Pol. |
The number of the associated network egress queue QoS policy, or default if the default policy is used. |
ACFC |
Indicates whether Address and Control Field PPP Header Compression is enabled. |
PFC |
Indicates whether Protocol Field PPP Header Compression is enabled. |
Auto-negotiate |
true The link attempts to automatically negotiate the link speed and duplex parameters. |
false The duplex and speed values are used for the link. |
|
Egress Rate |
The maximum amount of egress bandwidth (in kilobits per second) that this Ethernet interface can generate. |
Loopback |
The type of loopback configured on the port, either line, internal, or none. |
Loopback Time Left |
The number of seconds left in a timed loopback If there is no loopback configured or the configured loopback is latched, the value is unspecified. |
Configured Address |
The base chassis Ethernet MAC address. |
Hardware Address |
The interface hardware or system assigned MAC address at its protocol sublayer. |
Traffic Statistics |
Octets input/output — Specifies the total number of octets received and transmitted on the port Packets input/output, or the number of packets, delivered by this sublayer to a higher (sub)layer, which were not addressed to a multicast or broadcast address at this sublayer. The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sublayer, including those that were discarded or not sent. Errors input/output — For packet-oriented interfaces, this field specifies the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. For packet-oriented interfaces, this field specifies the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
Ethernet Statistics |
Broadcast Pckts — the number of packets, delivered by this sublayer to a higher (sub)layer, which were not addressed to a unicast or multicast address at this sublayer. The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a unicast or multicast address at this sublayer, including those that were discarded or not sent. |
A:7210SAS>show# port 1/1/2 dot1x detail
===============================================================================
802.1x Port Status
===============================================================================
Port control : force-auth
Port status : authorized
Authenticator PAE state : force-auth
Backend state : idle
Reauth enabled : no Reauth period : N/A
Max auth requests : 2 Transmit period : 30
Supplicant timeout : 30 Server timeout : 30
Quiet period : 60
Radius-plcy : N/A
Dot1x-Tunnel : Disabled
===============================================================================
802.1x Session Statistics
===============================================================================
authentication method : remote-radius
last session id : PAC-02210000-C28294A4
last session time : 49213d07h
last session username : N/A
last session term cause : N/A
user tx octets : 0 user tx frames : 0
user rx octets : 2648353056 user rx frames : 247852776
===============================================================================
802.1x Authentication Statistics
===============================================================================
tx frames : 0 rx frames : 0
tx req/id frames : 0 rx resp/id frames : 0
tx request frames : 0 rx response frames : 0
rx start frames : 0 rx logoff frames : 0
rx unknown frame type : 0 rx bad eap length : 0
rx last version : 0 rx last source mac :
===============================================================================
802.1x Authentication Diagnostics
===============================================================================
Enters Connecting : 0
EapLogoffs While Connecting : 0
Logoffs While Connecting : 0
Success While Authenticating : 0
Timeouts While Authenticating : 0
Failures While Authenticating : 0
Reauths While Authenticating : 0
EapStarts While Authenticating : 0
EapLogoffs While Authenticating : 0
Reauths While Authenticated : 0
EapStarts While Authenticated : 0
EapLogoffs While Authenticated : 0
Backend Responses : 0
Backend Access Challenges : 0
Backend Requests To Supplicant : 0
Backend Access Challenges : 0
Backend Non Nak Responses : 0
Backend Auth Successes : 0
Backend Auth Failures : 0
The following output is an example of optical information, and Table: Output fields: optical describes the output fields.
A:SAS# show port 1/1/1 optical force
===============================================================================
Optical Interface
===============================================================================
Transceiver Data
Transceiver Status : operational
Transceiver Type : SFP
Model Number : 3HE04824AAAA01 ALA IPU3ANLEAA
TX Laser Wavelength: 850 nm Diag Capable : yes
Connector Code : LC Vendor OUI : 00:01:9c
Manufacture date : 2016/04/10 Media : Ethernet
Serial Number : CG15KT0TF
Part Number : PLRXPLSCS43AL1
Optical Compliance : 10GBASE-SR
Link Length support: 80m for OM2 50u MMF; 30m for OM1 62.5u MMF; 300m for OM3*
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
Value High Alarm High Warn Low Warn Low Alarm
-------------------------------------------------------------------------------
Temperature (C) +41.1 +80.0 +75.0 -5.0 -10.0
Supply Voltage (V) 3.30 3.70 3.63 2.97 2.85
Tx Bias Current (mA) 5.0 10.0 8.5 3.0 2.6
Tx Output Power (dBm) -2.15 -1.00 -1.30 -7.50 -8.00
Rx Optical Power (avg dBm) -26.02 1.50 1.00 -12.00! -14.00!
===============================================================================
Label |
Description |
|---|---|
Transceiver Data |
|
Transceiver Status |
Displays the status of the transceiver |
Transceiver Type |
Displays the type of the transceiver |
Model Number |
Displays the model number of the transceiver |
TX Laser Wavelength |
Indicates the transceiver laser wavelength |
Connector Code |
Displays the vendor Organizationally Unique Identifier field (OUI) contains the IEEE company identifier for the vendor |
Manufacture date |
Displays the manufacturing date of the hardware component in the mmddyyyy ASCII format |
Serial Number |
Displays the vendor serial number of the hardware component |
Part Number |
The vendor part number contains ASCII characters, defining the vendor part number or product name |
Optical Compliance |
Specifies the optical compliance code of the transceiver |
Link Length support |
Specifies the link length support for the transceiver |
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated |
|
Temperature (C) |
Displays the temperature of the transceiver |
Supply Voltage (V) |
Displays the supply voltage of the transceiver |
Tx Bias Current (mA) |
Displays the transmitted bias current of the transceiver |
Tx Output Power (dBm) |
Displays the transmitted output power of the transceiver |
Rx Optical Power (avg dBm) |
Displays the received optical power of the transceiver |
lldp [nearest-bridge | nearest-non-tpmr | nearest-customer] [remote-info] [detail] [lldp-med]
show>port>ethernet
Supported on all 7210 SAS platforms as described in this document
This command displays Link Layer Discovery Protocol (LLDP) information.
Displays nearest bridge information.
Displays nearest Two-Port MAC Relay (TPMR) information.
Displays nearest customer information.
Displays remote information about the bridge MAC.
Displays more information.
Displays LLDP-MED information. This keyword is supported only on the 7210 SAS-Dxp.
The following output is an example of LLDP information, and Table: Output fields: port Ethernet LLDP describes the output fields.
Sample output*A:hw_sasm_duta>show# port 1/1/1 ethernet lldp
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
Port 1/1/1 Bridge nearest-bridge
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Tunnel Nearest Bridge : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
Port 1/1/1 Bridge nearest-non-tpmr
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
Port 1/1/1 Bridge nearest-customer
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
==============================================================================
*A:hw_sasm_duta>show#
*A:hw_sasm_duta>show# port 1/1/1 ethernet lldp nearest-bridge
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
Port 1/1/1 Bridge nearest-bridge
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Tunnel Nearest Bridge : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
==============================================================================
*A:hw_sasm_duta>show#
*A:7210-SAS# show port 1/1/3 ethernet lldp remote-info detail
===============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
===============================================================================
Port 1/1/3 Bridge nearest-bridge Remote Peer Information
-------------------------------------------------------------------------------
No remote peers found
Port 1/1/3 Bridge nearest-non-tpmr Remote Peer Information
-------------------------------------------------------------------------------
Remote Peer Index 142 at timestamp 06/10/2010 00:23:22:
Supported Caps : bridge router
Enabled Caps : bridge router
Chassis Id Subtype : 4 (macAddress)
Chassis Id : 0a:a5:ff:00:00:00
PortId Subtype : 7 (local)
Port Id : 35749888
Port Description : 10/100/Gig Ethernet SFP
System Name : Dut-B
System Description : TiMOS-B-0.0.I927 both/i386 NOKIA SAS 7210
Copyright (c) 2017 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Wed Dec 1 22:23:12 IST 2010 by builder in
/builder/0.0/panos/main
Remote Peer Index 142 management addresses at time 06/10/2010 00:23:22:
No remote management addresses found
Port 1/1/3 Bridge nearest-customer Remote Peer Information
-------------------------------------------------------------------------------
Remote Peer Index 143 at timestamp 06/10/2010 00:23:22:
Supported Caps : bridge router
Enabled Caps : bridge router
Chassis Id Subtype : 4 (macAddress)
Chassis Id : 0a:a7:ff:00:00:00
PortId Subtype : 7 (local)
Port Id : 35782656
Port Description : 10/100 Ethernet TX
System Name : Dut-G
System Description : TiMOS-B-8.0.R5 both/i386 NOKIA SR 7750 Copyright (c)
2017 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Tue Sep 28 18:24:07 PDT 2010 by builder in
/rel8.0/b1/R5/panos/main
Remote Peer Index 143 management addresses at time 06/10/2010 00:23:22:
*A:Dut-A# /show port 1/1/11 ethernet lldp lldp-med remote-info detail
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
Port 1/1/11 Bridge nearest-bridge Remote Peer Information
-------------------------------------------------------------------------------
Remote Peer Index 2 at timestamp 08/06/2020 11:08:52:
Supported Caps : bridge telephone
Enabled Caps : bridge telephone
Chassis Id Subtype : 5 (networkAddress)
Chassis Id : 01:C0:A8:02:02
PortId Subtype : 3 (macAddress)
Port Id : C0:74:AD:09:C1:4C
Port Description : eth0
System Name : GXP1625_c0:74:ad:09:c1:4c
System Description : GXP1625 1.0.4.138
Remote Peer Index 2 management addresses at time 08/06/2020 11:08:52:
No remote management addresses found
Enabled Caps : capabilities network-policy location extended-pd
inventory
LLDP Med Rem Device Type: Endpoint Class III
LLDP Med Rem App Type*: 1
LLDP Med Rem vlan-tag*: True LLDP Med Rem Vlan Tag*: 444
LLDP Med Rem Dot1p 1 : 4 LLDP Med Rem Ip Dscp 1: 44
Label |
Description |
|---|---|
Admin State |
Displays the LLDP transmission/reception frame handling |
Notifications |
Displays whether LLDP notifications are enabled |
Tunnel Nearest Bridge |
n/a |
Transmit TLVs |
Displays the optional TLVs that are transmitted by this port |
PortID TLV Subtype |
Displays the setting for the port ID subtype: tx-if-alias, tx-fi-name, or tx-local |
Management Address Transmit Configuration |
|
Index 1 (system) Index 2 (IPv6 system) |
Displays details of the management address configuration. The 7705 SAR can only be configured to send or not send the system address Enabled — the management address TLV is included in LLDPDUs sent by the port Disabled — the management address TLV is not included in LLDPDUs sent by the port |
Address |
Displays the address transmitted by the port when tx-mgmt-address command is enabled |
Supported Caps |
Displays the system capabilities supported by the remote peer |
Enabled Caps |
Displays the system capabilities enabled on the remote peer |
Chassis ID Subtype |
Displays an integer value and text definition that indicates the basis for the chassis ID entity listed in the chassis ID field |
Chassis ID |
Displays the chassis identifier of the chassis containing the Ethernet port that sent the LLDPDU |
PortId Subtype |
Displays an integer value and text definition that indicates the basis for the port ID entity listed in the port ID field |
Port ID |
Displays the port identifier of the Ethernet port that sent the LLDPDU |
Port Description |
Displays a description of the port that sent the LLDPDU and indicates that the description is the ifDescr object text string from RFC 2863 - IF MIB |
System Name |
Displays the name of the system that sent the LLDPDU |
System Description |
Displays the description of the system that sent the LLDPDU |
LLDP Med Rem Device Type |
Displays the LLDP-MED remote device type (endpoint Class III) |
LLDP Med Rem App Type |
Displays the application-type value in the Network Policy TLV of the LLDP-MED message received from the remote device |
LLDP Med vlan-tag-present |
Displays the value of the vlan-tag-present flag in the Network Policy TLV of the LLDP-MED message received from the remote device True — The VLAN tag is present False — The VLAN tag is not present |
LLDP Med Rem Vlan Tag |
Displays the VLAN value in the LLDP-MED message received from the remote device |
LLDP Med Rem Dot1p |
Displays the dot1p value in the Network Policy TLV of the LLDP-MED message received from the remote device |
LLDP Med Rem IP DSCP |
Displays the IP DSCP value in the Network Policy TLV of the LLDP-MED message received from the remote device |
internal-loopback-ports [detail]
show>system
7210 SAS-D and 7210 SAS-Dxp
This command displays information about internal loopback ports .
Displays application information
The following output is an example of internal loopback port information, and Table: Output fields: show MAC swap application describes the output fields.
Sample output*A:7210SAS>config>port# show system internal-loopback-ports detail
===============================================================================
Internal Loopback Port Status
===============================================================================
Port Loopback Application Service
Id Type Enabled
-------------------------------------------------------------------------------
1/1/2 Physical Mac-Swap Yes
1/1/11 Virtual Mac-Swap No
========================================
Mac-swap Application Status
========================================
Enabled : Yes
Test Service Id : 1
Test Sap Id : 1/1/2:40
Loopback Src Addr : 00:00:01:00:02:00
Loopback Dst Addr : 00:00:01:00:03:00
========================================
===============================================================================
*A:7210SAS>config>port#
Label |
Description |
|---|---|
Port ID |
Displays the port ID. |
LoopBack Type |
The Loopback type indicates whether the port is in Physical Front panel port or Internal Virtual port. |
Application |
Application mentions the application in use of the port. |
Service enabled |
The Service enabled displays, if services can be configured over this port. |
Enabled |
Displays the current status. |
Test Service ID |
The service ID that is used in the configuration of Mac-swap test. |
Test Sap ID |
The SAP ID that is used to configure the loopback SAP for the Mac-swap application. |
Loopback Src Addr |
The source MAC address that is used in the configuration of port loopback mac-swap test. |
Loopback Dst Addr |
The destination MAC address that is used in the configuration of port loopback mac-swap test. |
lldp
lldp neighbor
show>system
Supported on all 7210 SAS platforms as described in this document
This command displays local Link Layer Discovery Protocol (LLDP) information at the system level. This includes an option keyword to display summary information for all known peers.
Display all peer summary information
The following output is an example of system LLDP information.
Sample output*A:hw_sas_duta>show>system# lldp
===============================================================================
LLDP Configuration
===============================================================================
Transmit Interval : 30
Hold Multiplier : 4
Reinit Delay : 2
Notification Interval : 5
Tx Credit Max : 5
Message Fast Tx : 1
Message Fast Tx Init : 4
Admin Enabled : True
-------------------------------------------------------------------------------
LLDP System Information
-------------------------------------------------------------------------------
Chassis Id Subtype : 4
Chassis Id : 00:12:cf:b4:71:b8
System Name : hw_sas_duta
System Description : TiMOS-B-9.0.B1-12 both/mpc Nokia 7210 Copyright
(c) 2000-2016 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Tue Oct 18 15:22:40 IST 2016 by builder in /
home/builder/9.0B1/panos/main
Capabilities Supported : bridge router
Capabilities Enabled : bridge router
-------------------------------------------------------------------------------
LLDP Destination Addresses
-------------------------------------------------------------------------------
Index 1 : 01:80:c2:00:00:0e
Index 2 : 01:80:c2:00:00:03
Index 3 : 01:80:c2:00:00:00
-------------------------------------------------------------------------------
LLDP Remote Statistics
-------------------------------------------------------------------------------
Last Change Time : 10/21/2016 00:08:29
Rem Table Inserts : 0
Rem Table Deletes : 0
Rem Table Drops : 0
Rem Table Ageouts : 0
-------------------------------------------------------------------------------
LLDP System Management Addresses
-------------------------------------------------------------------------------
===============================================================================
*A:hw_sas_duta>show>system#
show system lldp neighbor
Link Layer Discovery Protocol (LLDP) System Information
===============================================================================
NB = nearest-bridge NTPMR = nearest-non-tpmr NC = nearest-customer
===============================================================================
Lcl Port Scope Remote Chassis ID Index Remote Port Remote System Name
-------------------------------------------------------------------------------
1/1/2 NB D8:1D:FF:00:00:00 1 1/2/2 cses-v29
1/1/5 NB D8:1E:FF:00:00:00 2 1/1/4 cses-v30
1/1/7 NB D8:1E:FF:00:00:00 3 1/1/6 cses-v30
1/1/4 NB D8:20:FF:00:00:00 5 1/1/5 cses-v32
1/1/6 NB D8:20:FF:00:00:00 6 1/1/7 cses-v32
1/1/1 NB D8:1C:FF:00:00:00 9 1/2/2 cses-V28
===============================================================================
poe [detail]
show>system
7210 SAS-Dxp 16p and 7210 SAS-Dxp 24p
This command displays the PoE support status.
Displays detailed PoE information.
The following output is an example of PoE information, and Table: Output fields: PoE describes the output fields.
Sample outputA:Dut-A# show system poe detail
============================================================
PoE Information (Existing)
============================================================
PSE Maximum Power Budget : 540 watts
PSE Power Provisioned : 30 watts
PSE Power Committed : 0 watts
PSE Power Available : 540 watts
-------------------------------------------------------------------------------
PoE provisioned (New)
===============================================================================
PSE Power Provisioned H-PoE : 0 watts
PSE Power Provisioned PoE++ : 0 watts
PSE Power Provisioned PoE+ : 0 watts
PSE Power Provisioned PoE : 0 watts
-------------------------------------------------------------------------------
PoE committed
===============================================================================
PSE Power Committed H-PoE : 0 watts
PSE Power Committed PoE++ : 0 watts
PSE Power Committed PoE+ : 0 watts
PSE Power Committed PoE : 0 watts
===============================================================================
PoE Port Information
===============================================================================
Port-Id PoE Admin PoE Oper PoE Type PoE Class PoE Power
State State Provisioned# Detected Committed
-------------------------------------------------------------------------------
1/1/1 Enabled Off PoE+ None N/A
1/1/2 Disabled None None None N/A
1/1/3 Disabled None None None N/A
1/1/4 Disabled None None None N/A
1/1/5 Disabled None None None N/A
1/1/6 Disabled None None None N/A
1/1/7 Disabled None None None N/A
1/1/8 Disabled None None None N/A
……
-------------------------------------------------------------------------------
Label |
Description |
|---|---|
PoE Information |
|
PSE Maximum Power Budget |
Displays the maximum power budget available for the system |
PSE Power Provisioned |
Displays the power provisioned |
PSE Power Committed |
Displays the sum of power supplied to all ports as determined by PoE type and class |
PSE Power Available |
Displays the power available from the maximum power budget |
PoE provisioned |
|
PSE Power Provisioned H-PoE |
Displays the power provisioned for HPoE devices |
PSE Power Provisioned PoE++ |
Displays the power provisioned for PoE++ devices |
PSE Power Provisioned PoE+ |
Displays the power provisioned for PoE+ devices |
PSE Power Provisioned PoE |
Displays the power provisioned for PoE devices |
PoE committed |
|
PSE Power Committed H-PoE |
Displays the power supplied to HPoE devices |
PSE Power Committed PoE++ |
Displays the power supplied to PoE++ devices |
PSE Power Committed PoE+ |
Displays the power supplied to PoE+ devices |
PSE Power Committed PoE |
Displays the power supplied to PoE devices |
PoE Port Information |
|
Port-Id |
Displays the port ID |
PoE Admin State |
Displays the PoE administrative state Enabled — Specifies that the PoE device is administratively enabled Disabled — Specifies that the PoE device is administratively disabled |
PoE Type Provisioned |
Displays the PoE type provisioned to the port |
PoE Class Detected |
Displays the PoE class, if available |
PoE Power Committed |
Displays the power committed to the PoE device |