debug [application]
show
Supported on all 7210 SAS platforms as described in this document
This command displays set debug points.
Displays which debug points have been set for the specified application.
The following output is an example of debug information.
Sample output*A:alu1# show debug
debug
mirror-source 101
port 1/1/1 ingress
no shutdown
exit
mirror-source 102
port 1/1/3 egress
no shutdown
exit
exit
*A:alu1#
service-using [mirror]
show>service
Supported on all 7210 SAS platforms as described in this document
This command displays mirror service information.
If no optional parameters are specified, all services defined on the system are displayed.
Displays mirror services.
The following output is an example of mirror service information, and Table: Output fields: service-using mirror describes the output fields.
Sample outputA:ALA-48# show service service-using mirror
===============================================================================
Services [mirror]
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
218 Mirror Up Down 1 04/08/2007 13:49:57
318 Mirror Down Down 1 04/08/2007 13:49:57
319 Mirror Up Down 1 04/08/2007 13:49:57
320 Mirror Up Down 1 04/08/2007 13:49:57
1000 Mirror Down Down 1 04/08/2007 13:49:57
1216 Mirror Up Down 1 04/08/2007 13:49:57
1412412 Mirror Down Down 1 04/08/2007 13:49:57
-------------------------------------------------------------------------------
Matching Services : 7
===============================================================================
A:ALA-48#
Label |
Description |
|---|---|
Service Id |
The service identifier. |
Type |
Specifies the service type configured for the service ID. |
Adm |
The desired state of the service. |
Opr |
The operating state of the service. |
CustomerID |
The ID of the customer who owns this service. |
Last Mgmt Change |
The date and time of the most recent management-initiated change to this service. |
mirror mirror-dest service-id
show
Supported on all 7210 SAS platforms as described in this document
This command displays mirror configuration and operation information.
Specifies the mirror service ID or a service name up to 64 characters.
The following output is an example of mirror configuration and operation information, and Table: Output fields: mirror destination describes the output fields.
Sample output — 7210 SAS-D, 7210 SAS-Dxp, or 7210 SAS-K 2F1C2T*7210SAS# show mirror mirror-dest 1000
===============================================================================
Mirror Service
===============================================================================
Service Id : 1000 Type : Ether
Description : (Not Specified)
Admin State : Up Oper State : Up
Forwarding Class : be Remote Sources: No
Profile : out
Destination SAP : 1/1/1:10.* Egr QoS Policy: 1
-------------------------------------------------------------------------------
Local Sources
-------------------------------------------------------------------------------
Admin State : Up
-Port 1/1/4 Egr
-Port 1/1/7 Ing
-SAP 1/1/1:20.* Ing
-IP Filter 1 Entry 1
-MAC Filter 1 Entry 1
*A:7210SAS>config>mirror>mirror-dest$ show mirror mirror-dest
===============================================================================
Mirror Services
===============================================================================
Id Type Adm Opr Destination SDP Lbl/
SAP QoS Src
Allowed
-------------------------------------------------------------------------------
1 Ether Down Down None n/a 0 Local
1000 Ether Up Down SDP 400 (1.1.1.1) Pending 0 Local
2000 Ether Up Up SAP 1/1/17:17 1 0 Remote
===============================================================================
*A:7210SAS>config>mirror>mirror-dest$
|
Label |
Description |
|---|---|
|
Service Id |
The service ID associated with this mirror destination. |
|
Type |
Entries in this table have an implied storage type of ‟volatile”. The configured mirror source information is not persistent. |
|
Admin State |
Up — The mirror destination is administratively enabled. Down — The mirror destination is administratively disabled. |
|
Oper State |
Up — The mirror destination is operationally enabled. Down — The mirror destination is operationally disabled. |
|
Forwarding Class |
The forwarding class for all packets transmitted to the mirror destination. |
|
Remote Sources |
Yes — A remote source is configured. No — A remote source is not configured. |
|
Destination SAP |
The ID of the access port where the SAP associated with this mirror destination service is defined. |
|
Egr QoS Policy |
Indicates the egress QoS policy ID. A value of 0 indicates that no QoS policy is specified. |
|
mirror sources allowed |
The type of mirror sources allowed to be configured. |