Tools dump command descriptions for the 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

accounting-policy

Syntax

accounting-policy acct-policy-id flash-write-count [clear]

Context

tools>dump

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command dumps the total count of flash writes for the accounting policy specified by the user. The clear option allows the user to clear the count maintained per accounting policy and starts the counter afresh.

Parameters

flash-write-count: Specifies to dump the total number of flash writes up to the present for the accounting policy specified by accounting-policy 'id'.

acct-policy-id

Specifies the Accounting policy.

Values: 1 to 99

clear: Clears the statistics.

eth-ring

Syntax

eth-ring ring-index [clear]

eth-ring control-sap-tag port-id [list-in-use | next-available]

Context

tools>dump

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays Ethernet-ring information.

Parameters

ring-index

Specifies the ring index.

Values: 1 to 128

clear: Clears the statistics.

lag

Syntax

lag lag-id lag-id

Context

tools>dump

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays LAG information.

Parameters

lag-id

Specifies an existing LAG id.

Values: 1 to 12

Output

Sample output


*A:7210 SAS>tools>dump# lag lag-id 1 
Port state      : Up
Selected subgrp : 1
NumActivePorts  : 2
ThresholdRising : 2
ThresholdFalling: 0
IOM bitmask     : 2
Config MTU      : 1522
Oper. MTU       : 1522
Bandwidth       : 200000

multi-chassis   : NO

------------------------------------------------------------------------------------
Indx   PortId   RX pkts   TX pkts   State Active Port  Cfg Oper Speed       BW AP CS
                                                 Pri   Mtu Mtu                    
------------------------------------------------------------------------------------
   0    1/1/
1         1         1      Up    yes 32768 1522 1522  1000   100000  0  2
   1    1/1/
2         0         0      Up    yes 32768 1522 1522  1000   100000  0  2

persistence

Syntax

persistence

Context

tools>dump

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

Commands in this context display persistence information for debugging purposes.

summary

Syntax

summary

Context

tools>dump>persistence

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

Commands in this context display persistence summary information for debugging purposes.

Output

Sample output

*A:7210 SAS>tools>dump# persistence summary 
=====================================================================
Persistence Summary on Slot A
=====================================================================
Client             Location            Entries in use    Status
---------------------------------------------------------------------
xxxxxx            cf1:\l2_dhcp.pst    200               ACTIVE
---------------------------------------------------------------------
Persistence Summary on Slot B
=====================================================================
Client             Location            Entries in use    Status
---------------------------------------------------------------------
xxxxxx              cf1:\l2_dhcp.pst    200               ACTIVE
---------------------------------------------------------------------
A:7210#

service

Syntax

service

Context

tools>dump

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

Commands in this context display service information.

id

Syntax

id service-id

Context

tools>dump>service

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

Commands in this context display information for a specific service.

Parameters

service-id

Specifies an existing service ID.

Values: 1 to 2147483647or a name string up to 64 characters

sap

Syntax

sap sap-id stats [clear]

Context

tools>dump>service>id

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays SAP information for this service.

Parameters

sap-id

Specifies the SDP binding identifier

Values

null	[`port-id` \| `lag-id` ]
dot1q	[`port-id` \| `lag-id` \| `pw-id`]:`qtag1`
qinq	[`port-id` \| `lag-id` \| `pw-id`]:`qtag1.qtag2`
dot1q	[`port-id` \| `lag-id`]:`cp-id`
port-id	`slot/mda/port`
lag-id	lag-`id` lag keyword `id` 1 to 6
pw-id	pw-`id` pw keyword `id` 1 to 10239
cp-id	cp-`id` cp keyword `id` 1 to 1000
qtag1	*, 0 to 4094
qtag2	*, 0 to 4094

clear: Clears the statistics.

stats: Displays statistics associated with this SAP.

Output

The following output is an example of the discard statistics, and Table: Output fields: discard statistics describes the fields.

Sample output

A:7210# tools dump service id 200 sap 1/X3/6:100 stats
===========================================================
Service Id 200 SAP 1/X3/6:100 VPLS Ingress Debug Stats
===========================================================
total number of discarded packets                   | 1
total number of discarded bytes                     | 996
number of discards due to source suppression        | 0
number of discards due to split horizon             | 0
number of discards due to mesh to mesh              | n/a
number of discards due to unknown DA                | 0
number of discards due to unknown SA                | 0
number of discards due to service MTU               | 0
number of discards due to STP not in fwding state   | 1
number of other discards                            | 0
===========================================================
Service Id 200 SAP 1/X3/6:100 VPLS Egress Debug Stats
===========================================================
total number of discarded packets                   | 0
number of unicast discards due to pool exhaustion   | 0
number of multicast discards due to pool exhaustion | 0
number of unicast discards due to queue overflow    | 0
number of multicast discards due to queue overflow  | 0
number of other discards                            | 0

Table: Output fields: discard statistics
Label	Description
total number of discarded packets	The total number of discarded ingress or egress packets for the specified SAP or SDP binding
total number of discarded bytes	The total number of discarded ingress bytes for the specified SAP or SDP binding
number of discards due to source suppression	The total number of ingress discards due to source suppression for the specified SAP or SDP binding
number of discards due to split horizon	The total number of ingress discards due to split horizon for the specified SAP or SDP binding
number of discards due to mesh to mesh	The total number of ingress discards due to mesh-to-mesh forwarding for the specified mesh SDP
number of discards due to unknown DA	The total number of ingress discards due to an unknown destination address for the specified SAP or SDP binding
number of discards due to unknown SA	The total number of ingress discards due to an unknown source address for the specified SAP or SDP binding
number of discards due to service MTU	The total number of ingress discards due to the packet size exceeding the configured maximum transmission unit for the specified SAP or SDP binding
number of discards due to STP not in fwding state	The total number of ingress discards due to an inactive VPLS endpoint determined by the Spanning Tree Protocol for the specified SAP
number of other discards	The total number of ingress or egress discards that do not match a listed category
number of unicast discards due to pool exhaustion	The total number of egress unicast discards due to pool exhaustion for the specified SAP or SDP binding
number of multicast discards due to pool exhaustion	The total number of egress multicast discards due to pool exhaustion for the specified SAP or SDP binding
number of unicast discards due to queue overflow	The total number of egress unicast discards due to queue overflow for the specified SAP or SDP binding
number of multicast discards due to queue overflow	The total number of egress multicast discards due to queue overflow for the specified SAP or SDP binding

sdp

Syntax

sap sdpid[:vc-id] stats [clear]

Context

tools>dump>service>id

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays SDP bind information for this service.

Parameters

sdp-id

Specifies the SDP binding identifier.

Values: 1 to 17407

vc-id

Specifies the virtual circuit identifier.

Values: 1 to 4294967295

clear: Clears the statistics.

stats: Displays statistics associated with this SDP.