Services show commands

customer

Syntax

customer [customer-id] [site customer-site-name]]

Context

show>service

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays service customer information.

Parameters

customer-id

Displays only information for the specified customer ID.

Values: 1 to 2147483647

Default: All customer IDs display.

site customer-site-name: Specifies the customer site that is an anchor point for an ingress and egress virtual scheduler hierarchy.

Output

The following output is an example of service customer information, and Table: Output fields: customer describes the output fields.

Sample output

*A:ALA-12# show service customer
==========================================================
Customers
==========================================================
Customer-ID : 1
Contact     : Manager
Description : Default customer
Phone       : (123) 555-1212

Customer-ID : 2
Contact     : Tech Support
Description : TiMetra Networks
Phone       : (234) 555-1212

Customer-ID : 3
Contact     : Test
Description : TiMetra Networks
Phone       : (345) 555-1212

Customer-ID : 6
Contact     : Test1
Description : Epipe Customer
Phone       : (456) 555-1212

Customer-ID : 7
Contact     : Test2
Description : VPLS Customer
Phone       : (567) 555-1212

Customer-ID : 8
Contact     : Customer Service
Description : IES Customer
Phone       : (678) 555-1212

Customer-ID : 274
Contact     : TestA
Description : ABC Company
Phone       : 650 123-4567

Customer-ID : 94043
Contact     : Test Engineer on Duty
Description : TEST Customer
Phone       : (789) 555-1212
------------------------------------------------------
Total Customers : 8
-----------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show service customer 274
==============================================================================
Customer  274
==============================================================================
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site        : west
Description : (Not Specified)
==============================================================================
*A:ALA-12#

Table: Output fields: customer
Label	Description
Customer-ID	The ID that uniquely identifies a customer.
Contact	The name of the primary contact person.
Description	Generic information about the customer.
Phone	The phone or pager number to reach the primary contact person.
Total Customers	The total number of customers configured.
Site	Multi-service site name. A multi-service customer site is a group of SAPs with common origination and termination points.
Description	Displays information about a specific customer multi-service site.
Assignment	The port ID, MDA, or card number, where the SAPs members of this multi- service site are defined.
I. Sched Pol	The ingress QoS scheduler policy assigned to this multi-service site.
E. Sched Pol	The egress QoS scheduler policy assigned to this multi-service site.
Service-ID	The ID that uniquely identifies a service.
SAP	Specifies the SAP assigned to the service.

fdb-mac

Syntax

fdb-mac [ieee-address] [expiry]

Context

show>service

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays the FDB entry for a specific MAC address.

Parameters

ieee-address: Specifies the 48-bit MAC address in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

expiry: Keyword that shows the amount of time until the MAC address is aged out.

Output

The following output is an example of MAC address FDB entry information, and Table: Output fields: FDB MAC describes the output fields.

Sample output

*A:ALA-48# show service fdb-mac
===============================================================================
Service Forwarding Database
===============================================================================
ServId    MAC               Source-Identifier     Type/Age  Last Change
-------------------------------------------------------------------------------
103       12:34:56:78:90:0f sap:1/1/7:0           Static    02/02/2009 09:27:57
700       90:30:ff:ff:ff:8f cpm                   Host      02/02/2009 09:27:57
-------------------------------------------------------------------------------
No. of Entries: 2
===============================================================================
*A:ALA-48#


*A:ALA-48# show service fdb-mac expiry
===============================================================================
Service Forwarding Database
===============================================================================
ServId    MAC               Source-Identifier     Type/     Last Change
                                                  Expiry
-------------------------------------------------------------------------------
103       12:34:56:78:90:0f sap:1/1/7:0           Static    02/02/2009 09:27:57
700       90:30:ff:ff:ff:8f cpm                   Host      02/02/2009 09:27:57
-------------------------------------------------------------------------------
No. of Entries: 2
===============================================================================
*A:ALA-48#

Table: Output fields: FDB MAC
Label	Description
ServId	Displays the configured service ID.
MAC	Displays the MAC address.
Source-Identifier	Displays the location where the MAC is defined.
Type/Age	Static — FDB entries created by management. Learned — Dynamic entries created by the learning process. OAM — Entries created by the OAM process. H — Host, the entry added by the system for a static configured subscriber host. D or DHCP — DHCP-installed MAC. Learned addresses can be temporarily frozen by the DHCP snooping application for the duration of a DHCP lease. P — Indicates the MAC is protected by the MAC protection feature.
Last Change	The time when the specific row entry was last changed.

sdp-using

Syntax

sdp-using [sdp-id[:vc-id] | far-end ip-address]

Context

show>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command displays services using SDP or far-end address options.

Parameters

sdp-id

Displays only services bound to the specified SDP ID.

Values: 1 to 17407

vc-id

Specifies the virtual circuit identifier.

Values: 1 to 4294967295

far-end ip-address

Displays only services matching with the specified far-end IP address.

Default: services with any far-end IP address

Output

The following output is an example of information for services using SDP address options, and Table: Output fields: SDP-using describes the output fields.

Sample output

*A:ALA-7210# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId       SdpId               Type Far End        Opr State I.Label  E.Label
-------------------------------------------------------------------------------
1           300:1               Spok 10.0.0.13      Up        131071   131071
2           300:2               Spok 10.0.0.13      Up        131070   131070
100         300:100             Spok 10.0.0.13      Up        131069   131069
101         300:101             Spok 10.0.0.13      Up        131068   131068
-------------------------------------------------------------------------------
Number of SDPs : 4
===============================================================================
*A:ALA-7210#

Table: Output fields: SDP-using
Label	Description
`Svc ID`	The service identifier.
`Sdp ID`	The SDP identifier.
`Type`	Type of SDP: spoke
`Far End`	The far-end address of the SDP.
`Oper State`	The operational state of the service.
`Ingress Label`	The label used by the far-end device to send packets to this device in this service by this SDP.
`Egress Label`	The label used by this device to send packets to the far-end device in this service by this SDP.

service-using

Syntax

service-using [epipe][ies] [vpls] [mirror] [i-vpls] [m-vpls] [customer customer-id]

Context

show>service

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays the services matching certain usage properties. If no optional parameters are specified, all services defined on the system are displayed.

Parameters

epipe: Displays matching Epipe services.

ies: Displays matching IES instances.

vpls: Displays matching VPLS instances.

mirror: Displays matching mirror services.

customer customer-id

Displays services only associated with the specified customer ID.

Values: 1 to 2147483647

Default: services associated with a customer

Output

The following output is an example of information for services matching specific usage properties, and Table: Output fields: service-using describes the output fields.

Sample output

*7210SAS>show>service# service-using customer 1

===============================================================================
Services  Customer 1
===============================================================================
ServiceId    Type      Adm  Opr  CustomerId Service Name
-------------------------------------------------------------------------------
1            VPLS      Up   Up   1
2            VPLS      Up   Up   1
3            VPLS      Up   Up   1
4            VPLS      Up   Up   1
2147483648   IES       Up   Down 1          _tmnx_InternalIesService
2147483649   intVpls   Up   Down 1          _tmnx_InternalVplsService
-------------------------------------------------------------------------------
Matching Services : 6
-------------------------------------------------------------------------------
===============================================================================
*7210SAS>show>service#

Table: Output fields: service-using
Label	Description
Service Id	The service identifier.
Type	Specifies the service type configured for the service ID.
Adm	The desired state of the service.
Opr	The operating state of the service.
CustomerID	The ID of the customer who owns this service.
Service name	The name of the service.

id

Syntax

id service-id

Context

show>service

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays information about a specified service ID.

Parameters

service-id

Specifies the unique service ID number that identifies the service in the service domain.

Values

service-id: 1 to 2147483647

svc-name: a string up to 64 characters

eth-ring

Syntax

eth-ring [status]

eth-ring [ring-index] hierarchy

eth-ring ring-index [path {a | b}]

Context

show

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays the Ethernet ring information.

Parameters

ring-index

Specifies the ring index.

Values: 1 to 128

status: Displays the status information of the Ethernet rings configured on the system.

hierarchy: Displays Ethernet ring hierarchical relationships.

path {a | b}: Displays information related to the configured Ethernet rings.

Output

The following outputs are examples of Ethernet ring information, and the associated tables describe the output fields.

Sample output

*A:NS1015C0821>show# eth-ring status

===============================================================================
Ethernet Ring (Status information)
===============================================================================
Ring   Admin  Oper       Path Information                 MEP Information
ID     State  State  Path         Tag       State     Ctrl-MEP CC-Intvl Defects
-------------------------------------------------------------------------------
1      Up     Up     a - 1/1/1    100       Up        Yes      100ms     -----
                     b - 1/1/2    100       Up        Yes      100ms     -----
10     Down   Down   a - N/A                 -        -        -         -----
                     b - N/A                 -        -        -         -----
===============================================================================
Ethernet Tunnel MEP Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
*A:NS1015C0821>show#

Table: Output fields: eth-ring status
Label	Description
`Ring Id`	The ring identifier.
`Admin State`	Displays the administrative state.
`Oper State`	Displays the operational state.
Path Information
`Path`	Displays the path information.
`Tag`	Displays the tag information.
`State`	Displays the state of the path.
MEP Information
`Ctrl-MEP`	Displays the Ctrl-MEP information.
`CC-Intvl`	Displays the Ctrl-Interval information.
`Defects`	Displays the defects.

Sample output

*A:NS1015C0821>show# eth-ring 10

===============================================================================
Ethernet Ring 10 Information
===============================================================================
Description        : (Not Specified)
Admin State        : Down               Oper State       : Down
Node ID            : 00:25:ba:03:48:04
Guard Time         :    5 deciseconds   RPL Node         : rplNone
Max Revert Time    :  300 seconds       Time to Revert   : N/A
CCM Hold Down Time :    0 centiseconds  CCM Hold Up Time :   20 deciseconds

APS Tx PDU         : N/A
Defect Status      :


-------------------------------------------------------------------------------
Ethernet Ring Path Summary
-------------------------------------------------------------------------------
Path Port     Raps-Tag     Admin/Oper      Type            Fwd State
-------------------------------------------------------------------------------
  a  -        -                 -/-         -               -
  b  -        -                 -/-         -               -
===============================================================================
*A:NS1015C0821>show#

Table: Output fields: eth-ring
Label	Description
`Description`	The ring description.
`Admin State`	Displays the administrative state.
`Oper State`	Displays the operational state.
`Node ID`	Displays the node identifier.
`Guard Time`	Displays the configured guard time.
`Max Revert time`	Displays the configured maximum revert time.
`CCM Hold down time`	Displays the configured CCM Hold down time.
`APS TX PDU`	Displays the APS TX PDU information.
`Defect Status`	Displays the defect status.
`RPL Node`	Displays the RPL node information.
`Time to revert`	Displays the configured time to revert.
`CCM Hold Up Time`	Displays the configured CCM Hold up time.
`Sub-Ring Type`	Displays the sub-ring type information, the sub-ring type can be virtual link or on-virtual link.
`Interconnect-ID`	Displays the interconnect ID. The ID can be a ring-index ID or VPLS service ID.
`Compatible Version`	Displays the Ethernet ring version information.

pw-routing

Syntax

pw-routing {local-prefix | static-route | paths | all}

pw-routing route-table [all-routes]

pw-routing route-table summary

Context

show>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command displays PW routing information at this 7210 node.

Parameters

local-prefix | static-route | paths | all: Shows details of the T-PE prefixes configured on this node, static routes from this node, explicit PW paths configured on this node, or all of these.

all-routes: Displays the PW routing table on this node. If all-routes is specified, the full routing table is displayed.

summary: Displays a summary of the PW routing table for this node.

Output

The following output is an example of PW routing information.

Sample output

*A:Dut-C# show service pw-routing local-prefix 
===============================================================================
Service PW Routing Information
===============================================================================
===============================================================================
Service PW Routing Local-Prefix RD Information
===============================================================================
Local-Prefix               Route-Dist                 Community       Adv-Bgp
-------------------------------------------------------------------------------
3:10.20.1.3                100:3                      100:3           enabled
                           100:4                      100:4           enabled
-------------------------------------------------------------------------------
Local-Prefix Entries found: 1
===============================================================================
===============================================================================
*A:Dut-C# show service pw-routing static-route 
===============================================================================
Service PW Routing Information
===============================================================================
=========================================================
Service PW Routing Static-Route Information
=========================================================
Prefix                        Next-Hop
---------------------------------------------------------
6:10.20.1.6/64                10.20.1.5
---------------------------------------------------------
Static Route Entries found: 1
=========================================================
===============================================================================

*A:Dut-C# show service pw-routing paths        
===============================================================================
Service PW Routing Information
===============================================================================
=============================================================
Service PW Routing Path Information
=============================================================
Path                             Adm     Hop IP Address
-------------------------------------------------------------
path1_to_F                       up      1   10.20.1.5
                                         2   10.20.1.2
path1_to_F2                      up      1   10.20.1.2
                                         2   10.20.1.5
-------------------------------------------------------------
Path Entries found: 2
=============================================================
===============================================================================


*A:Dut-C# show service pw-routing all        
===============================================================================
Service PW Routing Information
===============================================================================
SPE-Address       : 3:10.20.1.3
Boot Timer        : 10 secs
Boot Timer Remain : 0 secs
Retry Timer       : 30 secs
Retry Count       : 30

===============================================================================
Service PW Routing Local-Prefix RD Information
===============================================================================
Local-Prefix               Route-Dist                 Community       Adv-Bgp
-------------------------------------------------------------------------------
3:10.20.1.3                100:3                      100:3           enabled
                           100:4                      100:4           enabled
-------------------------------------------------------------------------------
Local-Prefix Entries found: 1
===============================================================================
=========================================================
Service PW Routing Static-Route Information
=========================================================
Prefix                        Next-Hop
---------------------------------------------------------
6:10.20.1.6/64                10.20.1.5
---------------------------------------------------------
Static Route Entries found: 1
=========================================================
=============================================================
Service PW Routing Path Information
=============================================================
Path                             Adm     Hop IP Address
-------------------------------------------------------------
path1_to_F                       up      1   10.20.1.5
                                         2   10.20.1.2
path1_to_F2                      up      1   10.20.1.2
                                         2   10.20.1.5
-------------------------------------------------------------
Path Entries found: 2
=============================================================
===============================================================================


*A:Dut-C# show service pw-routing route-table all-routes 
===============================================================================
Service PW L2 Routing Information
===============================================================================
AII-Type2/Prefix-Len                           Next-Hop       Owner  Age
 Route-Distinguisher                            Community      Best  
-------------------------------------------------------------------------------
3:10.20.1.3:0/64                               10.20.1.3      local  00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:1/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:2/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:3/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:4/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:5/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:6/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:7/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:8/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:9/96                               10.20.1.3      host   00h32m08s
 0:0                                            0:0            yes    
3:10.20.1.3:10/96                              10.20.1.3      host   00h32m07s
 0:0                                            0:0            yes    
6:10.20.1.6:0/64                               10.20.1.5      static 00h07m33s
 0:0                                            0:0            yes    
6:10.20.1.6:0/64                               10.20.1.5      bgp    00h31m34s
 100:6                                          100:6          no     
-------------------------------------------------------------------------------
Entries found: 13
===============================================================================

*A:Dut-C# show service pw-routing route-table summary 
========================================
Service PW L2 Routing Summary
========================================
Source              Active
----------------------------------------
BGP                 1
Static              1
Host                10
Local               3
----------------------------------------
Total               15
========================================

pw-template

Syntax

pw-template

Context

show>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command displays information about PW templates.

Output

The following output is an example of PW template information.

Sample output

*A:Dut-B#    show service  pw-template 1         
=======================================================================
PW Template Information
=======================================================================
PW Tmpl Id           : 1                    
Use Provisioned Sdp  : enabled              VcType           : vlan
Acctg Policy         : default              Collect Stats    : disabled
Mac-Learning         : enabled              Mac-Ageing       : enabled
Discard Unkn Src     : disabled             Limit MacMove    : blockable
Mac-Pinning          : disabled             Vlan VcTag       : 4095
MAC Address Limit    : no limit             Rest Prot Src Mac: disabled
Auto Learn Mac Prot  : disabled             RestProtSrcMacAct: disable
Block On Peer Fault  : disabled             

SHG
Name                 :                      
Description          : (Not Specified)
Rest Prot Src Mac    : disabled             Rest Unprot Dst  : disabled
Auto Learn Mac Prot  : disabled             RestProtSrcMacAct: disable

Egress
Mac FilterId         : none                 Ip FilterId      : none
Ipv6 FilterId        : none                 QoS NetPlcyId    : none
Port RedirectQGrp    : none                 Instance Id      : none

Ingress
Mac FilterId         : none                 Ip FilterId      : none
Ipv6 FilterId        : none                 QoS NetPlcyId    : none
Fp RedirectQGrp      : none                 Instance Id      : none

IGMP
Fast Leave           : disabled             Import Plcy      : none
Last Memb Intvl      : 10 deci-secs         Max Nbr Grps     : 0
Send Queries         : disabled             
Version              : 3                    

Force VlanVc Fwd     : disabled             Control Word     : disabled
Hash Label           : disabled             Hash Lbl Sig Cap : disabled
Last Changed         : 02/12/2013 22:11:49  
-----------------------------------------------------------------------
Included SDP-Groups
-----------------------------------------------------------------------
red
-----------------------------------------------------------------------

pw-template-using

Syntax

pw-template-using

Context

show>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command displays information about services that are using a PW template.

Output

The following output is an example of information about services that are using a PW template, and Table: Output fields: PW template using describes the output fields.

Sample output


*A:dut-a>show>service# pw-template-using 

============================================
Services using PW Template 
============================================
PW Template Id        SvcId
--------------------------------------------
5                     5
============================================
*A:dut-a>show>service#

Table: Output fields: PW template using
Label	Description
PW Template Id	The PW template identifier.
Svc ID	The service identifier.

sdp

Syntax

sdp sdp-id keep-alive-history

sdp far-end ip-address keep-alive-history

sdp [sdp-id] [detail]

sdp far-end ip-address [detail]

Context

show>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command displays SDP information.

If no optional parameters are specified, a summary SDP output for all SDPs is displayed.

Parameters

sdp-id

Specifies the SDP ID for which to display information.

Values: 1 to 17407

Default: all SDPs

far-end ip-address

Displays only SDPs matching the specified far-end IP address.

Default: SDPs with any far-end IP address

detail

Displays detailed SDP information.

Default: SDP summary output

keep-alive-history

Displays the last fifty SDP keepalive events for the SDP.

Default: SDP summary output

Output

The following output is an example of SDP information for the 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C, and Table: Output fields: service SDP describes the output fields.

Sample output

*A:Dut-D# show service id 1 sdp 17407:4294967294 detail
=======================================================================
Service Destination Point (Sdp Id : 17407:4294967294) Details
=======================================================================
-------------------------------------------------------------------------------
 Sdp Id 17407:4294967294  -(not applicable)
-----------------------------------------------------------------------
Description     : (Not Specified)
SDP Id             : 17407:4294967294         Type              : VplsPmsi
Split Horiz Grp    : (Not Specified)
VC Type            : Ether                    VC Tag            : n/a
Admin Path MTU     : 9194                     Oper Path MTU     : 9194
Delivery           : MPLS
Far End            : not applicable
Tunnel Far End     : n/a                      LSP Types         : None
Hash Label         : Disabled                 Hash Lbl Sig Cap  : Disabled
Oper Hash Label    : Disabled
 
Admin State        : Up                       Oper State        : Up
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : 0                        Egress Label      : 3
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
Last Status Change : 12/14/2012 12:42:22      Signaling         : None
Last Mgmt Change   : 12/14/2012 12:42:19      Force Vlan-Vc     : Disabled
Endpoint           : N/A                      Precedence        : 4
PW Status Sig      : Enabled
Class Fwding State : Down
Flags              : None
Time to RetryReset : never                    Retries Left      : 3
Mac Move           : Blockable                Blockable Level   : Tertiary
Local Pw Bits      : None
Peer Pw Bits       : None
Peer Fault Ip      : None
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
Application Profile: None
Max Nbr of MAC Addr: No Limit                 Total MAC Addr    : 0
Learned MAC Addr   : 0                        Static MAC Addr   : 0
 
MAC Learning       : Enabled                  Discard Unkwn Srce: Disabled
MAC Aging          : Enabled
BPDU Translation   : Disabled
L2PT Termination   : Disabled
MAC Pinning        : Disabled
Ignore Standby Sig : False                    Block On Mesh Fail: False
Oper Group         : (none)                   Monitor Oper Grp  : (none)
Rest Prot Src Mac  : Disabled
Auto Learn Mac Prot: Disabled                 RestProtSrcMacAct : Disable
 
Ingress Qos Policy : (none)                   Egress Qos Policy : (none)
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
 
-----------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-----------------------------------------------------------------------
V-MEP Filtering    : Disabled
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled
Hello Time         : 10                       Hello Msg Len     : 0
Max Drop Count     : 3                        Hold Down Time    : 10
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0
E. Fwd. Pkts.      : 2979761                  E. Fwd. Octets    : 476761760
 
-----------------------------------------------------------------------
Control Channel Status
-----------------------------------------------------------------------
PW Status          : disabled                 Refresh Timer     : <none>
Peer Status Expire : false                    Clear On Timeout  : true
 
MCAC Policy Name   :
MCAC Max Unconst BW: no limit                 MCAC Max Mand BW  : no limit
MCAC In use Mand BW: 0                        MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0                        MCAC Avail Opnl BW: unlimited
 
-----------------------------------------------------------------------
RSVP/Static LSPs
-----------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
 
-----------------------------------------------------------------------
Class-based forwarding :
-----------------------------------------------------------------------
Class forwarding   : Disabled                 EnforceDSTELspFc  : Disabled
Default LSP        : Uknwn                    Multicast LSP     : None
 
=======================================================================
FC Mapping Table
=======================================================================
FC Name             LSP Name
-----------------------------------------------------------------------
No FC Mappings
 

-----------------------------------------------------------------------
Stp Service Destination Point specifics
-----------------------------------------------------------------------
Stp Admin State    : Down                     Stp Oper State    : Down
Core Connectivity  : Down
Port Role          : N/A                      Port State        : Forwarding
Port Number        : 0                        Port Priority     : 128
Port Path Cost     : 10                       Auto Edge         : Enabled
Admin Edge         : Disabled                 Oper Edge         : N/A
Link Type          : Pt-pt                    BPDU Encap        : Dot1d
Root Guard         : Disabled                 Active Protocol   : N/A
Last BPDU from     : N/A
Designated Bridge  : N/A                      Designated Port Id: N/A
 
Fwd Transitions    : 0                        Bad BPDUs rcvd    : 0
Cfg BPDUs rcvd     : 0                        Cfg BPDUs tx      : 0
TCN BPDUs rcvd     : 0                        TCN BPDUs tx      : 0
TC bit BPDUs rcvd  : 0                        TC bit BPDUs tx   : 0
RST BPDUs rcvd     : 0                        RST BPDUs tx      : 0
-----------------------------------------------------------------------
Number of SDPs : 1
-----------------------------------------------------------------------
=======================================================================




*A:Dut-B#  show service sdp 204 detail 

=======================================================================
Service Destination Point (Sdp Id : 204) Details
=======================================================================
-----------------------------------------------------------------------
 Sdp Id 204  -10.20.1.4
-----------------------------------------------------------------------
Description           : (Not Specified)
SDP Id               : 204                   SDP Source         : manual
Admin Path MTU       : 0                     Oper Path MTU      : 1492
Delivery             : MPLS                  
Far End              : 10.20.1.4
Tunnel Far End       : n/a                   LSP Types          : RSVP
 
Admin State          : Up                    Oper State         : Up
Signaling            : TLDP                  Metric             : 0
Acct. Pol            : None                  Collect Stats      : Disabled
Last Status Change   : 02/12/2013 22:10:43   Adv. MTU Over.     : No
Last Mgmt Change     : 02/12/2013 22:09:55   VLAN VC Etype      : 0x8100
Bw BookingFactor     : 100                   PBB Etype          : 0x88e7
Oper Max BW(Kbps)    : 0                     Avail BW(Kbps)     : 0
Net-Domain           : default               Egr Interfaces     : Consistent
Flags                : None           
 
Mixed LSP Mode Information :
Mixed LSP Mode       : Disabled              Active LSP Type    : RSVP
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
-----------------------------------------------------------------------
SDP-Groups
-----------------------------------------------------------------------
red
-----------------------------------------------------------------------
 
-----------------------------------------------------------------------
RSVP/Static LSPs
-----------------------------------------------------------------------
Associated LSP List :
Lsp Name             : lsp-b2d               
Admin State          : Up                    Oper State         : Up
Time Since Last Tran*: 00h17m33s             
 
-----------------------------------------------------------------------
Class-based forwarding :
-----------------------------------------------------------------------
Class forwarding     : Disabled              EnforceDSTELspFc   : Disabled
Default LSP          : Uknwn                 Multicast LSP      : None

=======================================================================
FC Mapping Table
=======================================================================
FC Name             LSP Name
-----------------------------------------------------------------------
No FC Mappings
 
=======================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B# 


*A:ALA-12# show service sdp
==============================================================================
Services: Service Destination Points                                           
==============================================================================
SdpId    Adm MTU   Opr MTU   IP address       Adm  Opr         Deliver Signal  
------------------------------------------------------------------------------
10       4462      4462      10.20.1.3        Up   Dn NotReady MPLS    TLDP    
40       4462      1534      10.20.1.20       Up   Up          MPLS    TLDP    
60       4462      1514      10.20.1.21       Up   Up          MPLS    TLDP    
100      4462      4462      10.0.0.2         Down Down        MPLS    TLDP    
500      4462      4462      10.20.1.50       Up   Dn NotReady MPLS    TLDP    
------------------------------------------------------------------------------
Number of SDPs : 5                                                            
==============================================================================
*A:ALA-12# 

*A:Dut-A# show service sdp 1 detail 
==============================================================================
Service Destination Point (Sdp Id : 1) Details 
------------------------------------------------------------------------------
 Sdp Id 1  -(10.20.1.3)  
------------------------------------------------------------------------------
Description           : epipe sdp 1 for lspId 00:00:00:01:00:00:00:00
SDP Id               : 1                     SDP Source         : manual       
Admin Path MTU       : 0                     Oper Path MTU      : 1492         
Far End              : 10.20.1.3             Delivery           : MPLS         
Admin State          : Up                    Oper State         : Up           
Signaling            : TLDP                  Metric             : 0            
Acct. Pol            : None                  Collect Stats      : Disabled     
Last Status Change   : 12/08/2008 22:54:30   Adv. MTU Over.     : No           
Last Mgmt Change     : 12/08/2008 22:54:01   VLAN VC Etype      : 0x8100       
Bw BookingFactor     : 100                   PBB Etype          : 0x88e7       
Oper Max BW(Kbps)    : 1000                  Avail BW(Kbps)     : 1000         
Flags                : None
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled     
Hello Time           : 10                    Hello Msg Len      : 0            
Hello Timeout        : 5                     Unmatched Replies  : 0            
Max Drop Count       : 3                     Hold Down Time     : 10           
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0            
 
Associated LSP LIST :
Lsp Name             : tof1                                                    
Admin State          : Up                    Oper State         : Up           
Time Since Last Tran*: 00h04m01s 
------------------------------------------------------------------------------
Class-based forwarding :
------------------------------------------------------------------------------
Class forwarding     : disabled              EnforceDSTELspFc   : disabled     
Default LSP          : Uknwn                 Multicast LSP      : None
==============================================================================
FC Mapping Table                      
==============================================================================
FC Name             LSP Name                                                   
------------------------------------------------------------------------------
No FC Mappings
==============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-A>config>service#


*A:ALA-12# show service sdp 8
==============================================================================
Service Destination Point (Sdp Id : 8)
==============================================================================
SdpId    Adm MTU   Opr MTU   IP address       Adm  Opr         Deliver Signal
------------------------------------------------------------------------------
8        4462      4462      10.10.10.104     Up   Dn NotReady MPLS    TLDP
==============================================================================
*A:ALA-12# 

*A:ALA-12# 
===============================================================================
Service Destination Point (Sdp Id : 8) Details
===============================================================================
Sdp Id 8  -(10.10.10.104)
-------------------------------------------------------------------------------
Description           : MPLS-10.10.10.104
SDP Id               : 8
Admin Path MTU       : 0                     Oper Path MTU      : 0
Far End              : 10.10.10.104          Delivery           : MPLS
Admin State          : Up                    Oper State         : Down
Flags                : SignalingSessDown TransportTunnDown
Signaling            : TLDP                  VLAN VC Etype      : 0x8100
Last Status Change   : 02/01/2007 09:11:39   Adv. MTU Over.     : No
Last Mgmt Change     : 02/01/2007 09:11:46
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
Associated LSP LIST :
Lsp Name             : to-104
Admin State          : Up                    Oper State         : Down
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#

*A:MV-SR12>config>service>vprn# show service sdp 10 detail
===============================================================================
Service Destination Point (Sdp Id : 10) Details
===============================================================================
Sdp Id 10  -(200.20.1.201)
-------------------------------------------------------------------------------
Description           : (Not Specified)
SDP Id               : 10                    SDP Source         : manual
Admin Path MTU       : 0                     Oper Path MTU      : 9182
Far End              : 200.20.1.201          Delivery           : MPLS/LDP
Admin State          : Up                    Oper State         : Up
Signaling            : TLDP                  Metric             : 0
Acct. Pol            : None                  Collect Stats      : Disabled
Last Status Change   : 02/12/2010 22:37:08   Adv. MTU Over.     : No
Last Mgmt Change     : 02/12/2010 22:37:03   VLAN VC Etype      : 0x8100
Bw BookingFactor     : 100                   PBB Etype          : 0x88e7
Oper Max BW(Kbps)    : 0                     Avail BW(Kbps)     : 0
Net-Domain           : default               Egr Interfaces     : Consistent
Mixed LSP Mode       : Enabled
Revert Time          : 0                     Revert Count Down  : n/a
Flags                : None

KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
-------------------------------------------------------------------------------
LDP Information :
-------------------------------------------------------------------------------
LDP LSP Id           : 65539                 LDP Active         : No
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP LIST :
Lsp Name             : To_7710
Admin State          : Up                    Oper State         : Up
Time Since Last Tran*: 01h20m56s
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding     : Disabled              EnforceDSTELspFc   : Disabled
Default LSP          : Uknwn                 Multicast LSP      : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name
-------------------------------------------------------------------------------
No FC Mappings
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:MV-SR12>config>service>vprn#

Table: Output fields: service SDP
Label	Description
`SDP Id`	The SDP identifier.
`Description`	Displays a text string describing the SDP.
`Admin Path MTU`	Displays the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel.
`Opr Path MTU`	Displays the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. To be able to bind this SDP to a specific service, the value of this object minus the control word size (if applicable) must be equal to or larger than the MTU of the service, as defined by its service MTU.
`Far End`	Displays the far-end IP address.
`Delivery`	The type of delivery used by the SDP: MPLS.
`IP address`	Specifies the IP address of the remote end of the MPLS tunnel defined by this SDP.
`Adm` `Admin State`	The desired state of the SDP.
`Opr` `Oper State`	The operating state of the SDP.
`Flags`	Specifies all the conditions that affect the operating status of this SDP.
`Signal` `Signaling`	The signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP.
`Last Status Change`	The time of the most recent operating status change to this SDP.
`Adv. NTU Over`	Specifies whether the advertised MTU of a VLL spoke-SDP bind includes the 14-byte Layer 2 header, so that it is backward compatible with pre-2.0 software.
`Last Mgmt Change`	The time of the most recent management-initiated change to this SDP.
`KeepAlive Information`	This section displays Keepalive information.
`Hello Time`	Specifies how often the SDP echo request messages are transmitted on this SDP.
`Hello Msg Len`	The length of the SDP echo request messages transmitted on this SDP.
`Hello Timeout`	The number of seconds to wait for an SDP echo response message before declaring a timeout.
`Unmatched Replies`	The number of SDP unmatched message replies timer expired.
`Max Drop Count`	The maximum number of consecutive SDP echo request messages that can be unacknowledged before the keepalive protocol reports a fault.
`Hold Down Time`	The amount of time to wait before the keepalive operating status is eligible to enter the alive state.
`TX Hello Msgs`	The number of SDP echo request messages transmitted since the keepalive was administratively enabled or the counter was cleared.
`Rx Hello Msgs`	The number of SDP echo request messages received since the keepalive was administratively enabled or the counter was cleared.
`Associated LSP List`	When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far end field.
`Lsp Name`	Displays the LSP name.
`Time Since Last Transaction`	Displays the time of the last transaction.
`Signaling`	Specifies the signaling type.
`Collect Stats`	Specifies whether the agent collects accounting statistics for this SDP. When the value is true the agent collects accounting statistics on this SDP.
`VLAN VC Etype`	Displays the VLAN VC type.
`BW Booking Factor`	Specifies the value used to calculate the max SDP available bandwidth. The value specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value of is set to zero (0), no new VLL spoke-SDP bindings with non-zero bandwidth are permitted with this SDP. Overbooking, >100% is allowed.
`PBB Etype`	Displays the Ethertype used in frames sent out on this SDP when specified as vlan for Provider Backbone Bridging frames.
`Oper Max BW (Kbps)`	Indicates the operational bandwidth in kilo-bits per seconds (Kbps) available for this SDP. The value is determined by the sum of the bandwidth of all the RSVP LSPs used by the SDP.
`Avail BW (Kbps)`	Indicates the bandwidth that is still free for booking by the SDP bindings on the SDP.
`Net-Domain`	Specifies the network-domain name configured on this SDP. The default value of this object is the default ‟network-domain”.
`Egr Interface`	Indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP. not applicable — indicates that there is no egress network interface that can carry traffic on this SDP. consistent — indicates that the network domains for all the egress network interfaces that can carry traffic on this SDP are consistent. inconsistent — indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent.
`Revert Time`	Specifies the time to wait before reverting back from LDP to the configured LSPs, after having failed over to LDP.
`Revert Count Down`	Indicates the timer countdown before reverting back from LDP on this SDP. The timer countdown begins after the first configured LSP becomes active.
`Flags`	Displays all the conditions that affect the operating status of this SDP.
`Class Forwarding`	Indicates the admin state of class-based forwarding on this SDP. When the value is true, class-based forwarding is enabled.
`EnforceDSTELspFc`	Specifies whether service manager must validate with RSVP the support of the FC by the LSP.
`Default LSP`	Specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding.
`Multicast LSP`	Displays the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be forwarded on an LSP according to its forwarding class mapping.
`Number of SDPs`	Displays the metric to be used within the Tunnel Table Manager for decision-making purposes. When multiple SDPs going to the same destination exist, this value is used as a tie-breaker by Tunnel Table Manager users, such as MP-BGP, to select the route with the lower value.