Default slope policy values for the 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C

Example

The following is a sample default slope policy configuration output, and Table: Default slope policy values lists the default values.

*A:SAH01-051>config>qos>slope-policy$ info detail
----------------------------------------------
            no description
            high-slope
                shutdown
                start-avg 70
                max-avg 90
                max-prob 80
            exit
            low-slope
                shutdown
                start-avg 50
                max-avg 75
                max-prob 80
            exit
            high-slope-ring
                shutdown
                start-avg 70
                max-avg 90
                max-prob 80
            exit
            low-slope-ring
                shutdown
                start-avg 50
                max-avg 75
                max-prob 80
            exit
----------------------------------------------
*A:SAH01-051>config>qos>slope-policy$

Table: Default slope policy values
Description	Default slope policy
high-slope
Administrative state	shutdown
start-avg	70% utilization
max-avg	90% utilization
max-prob	80%
low slope
Administrative state	shutdown
start-threshold	50% utilization
max-avg	75% utilization
max-prob	80%
high-slope-ring
Administrative state	shutdown
start-threshold	70% utilization
max-avg	90% utilization
max-prob	80%
low-slope-ring
Administrative state	shutdown
start-threshold	50% utilization
max-avg	75% utilization
max-prob	80%