network [policy-id] [detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays the accounting status of a network QoS policy along with other details of the policy. When frame-based-accounting is enabled accounting is shown as frame-based otherwise packet-based.
Displays information about the specific policy ID.
Displays the detail policy information.
The following output is an example of QoS network policy information, and Table: Output fields: network describes the output fields.
Sample output*A:dut-a>show>qos# network 1
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1
Egr Remark : False Egr Rem Plcy : N/A
Forward Class : be Profile : None
Scope : Template
DOT1P Class Poli*: 1 DSCP Class Polic*: 0
MPLS Lsp Exp Cla*: 0
Description : Default network-port QoS policy.
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:dut-a>show>qos#
*A:dut-a>show>qos# network 1
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1
Egr Remark : False Egr Rem Plcy : N/A
Forward Class : be Profile : None
Scope : Template
DOT1P Class Poli*: 1 DSCP Class Polic*: 0
MPLS Lsp Exp Cla*: 0
Description : Default network-port QoS policy.
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:dut-a>show>qos#
Label |
Description |
|---|---|
Policy-ID |
Displays the policy identifier |
Profile |
Out — Specifies the dot1p marking for the packets which are out-of-profile, egressing on this queue In — Specifies the dot1p markings for in-profile packets egressing this queue |
Scope |
Exclusive — Implies that this policy can only be applied to a single SAP Template — Implies that this policy can be applied to multiple SAPs on the router |
Description |
A text description of the port |
network-queue [network-queue-policy-name] [detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays accounting status of a network-queue policy along with other details of the policy. When frame-based-accounting is enabled, accounting is shown as frame-based; otherwise it is shown as packet-based.
Displays information about the specific Network queue policy.
Displays the detailed policy information.
The following output is an example of QoS network-queue policy information, and Table: Output fields: network queue describes the output fields.
Sample output*A:Dut-1# show qos network-queue default
===============================================================================
QoS Network Queue Policy
===============================================================================
-------------------------------------------------------------------------------
Network Queue Policy (default)
-------------------------------------------------------------------------------
Policy : default
Accounting : frame-based
Description : Default network queue QoS policy.
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Port-id : 1/1/6
Port-id : 1/1/7
Port-id : 1/1/8
Port-id : 1/1/9
Port-id : 1/1/10
Port-id : 1/1/11
Port-id : 1/1/12
Port-id : 1/1/13
Port-id : 1/1/14
Port-id : 1/1/15
Port-id : 1/1/16
Port-id : 1/1/17
Port-id : 1/1/18
Port-id : 1/1/20
Port-id : 1/1/21
Port-id : 1/1/22
Port-id : 1/1/23
Port-id : 1/1/24
===============================================================================
*A:Dut-1#
Label |
Description |
|---|---|
Policy |
Displays the policy |
Accounting |
Packet-based — Specifies that the meters associated with this policy do not account for packet framing overheads (such as the Inter Frame Gap (IFG) and the preamble for Ethernet), while accounting for the bandwidth to be used by this flow Frame-based — Specifies that the meters associated with this policy account for the packet framing overheads (such as, for Ethernet, the IFG and preamble), while accounting the bandwidth to be used by the flow |
Description |
A text description of the port |
Port-Id |
Displays the specified port ID |
sap-ingress [policy-id] [association | match-criteria | detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays accounting status of a sap-ingress policy along with other details of the policy. When frame-based-accounting is enabled accounting is shown as frame-based otherwise packet-based.
Displays information about the specific policy ID.
Displays the associations of the sap-ingress policy.
Displays the match criteria of the sap-ingress policy.
Displays the detailed information of the sap-ingress policy.
The following output is an example of QoS SAP ingress policy information, and Table: Output fields: SAP-ingress QoS policy describes the output fields.
Sample output*A:dut-a>show>qos# sap-ingress 1
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Default FC : be
Criteria-type : None
Mac Sub-Criteria : None IP Sub-Criteria : None
IPv6 Enabled : False
DOT1P Class Policy Id : 0 DSCP Class Policy Id : 0
MPLS Lsp Exp Class Policy*: 0
Name : default
Description : Default SAP ingress QoS policy.
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:dut-a>show>qos#
Label |
Description |
|---|---|
Policy-Id |
The ID that uniquely identifies the policy |
Scope |
Exclusive — Implies that this policy can only be applied to a single SAP Template — Implies that this policy can be applied to multiple SAPs on the router |
Default FC |
Specifies the default forwarding class for the policy |
Criteria-type |
IP — Specifies that an IP criteria-based SAP ingress policy is used to select the appropriate ingress meter and corresponding forwarding class for matched traffic MAC — Specifies that a MAC criteria-based SAP is used to select the appropriate ingress meters and corresponding forwarding class for matched traffic |
MAC Sub-Criteria |
Displays the configured MAC sub-criteria |
IP Sub-Criteria |
Displays the configured IP sub-criteria |
Description |
A text string that helps identify the policy’s context in the configuration file |