sap-ingress [policy-id] [detail | association | match-criteria]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays SAP ingress QoS policy information.
Displays information about the specific policy ID.
Displays detailed policy information including policy associations.
Displays the policy associations of the sap-ingress policy.
Displays the match-criterion of the sap-ingress policy.
The following output is an example of SAP ingress QoS policy information, and Table: Output fields: SAP ingress describes the output fields.
Sample output*A:Dut-B>show>qos# sap-ingress 1 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Default FC : be
Criteria-type : None
Mac Sub-Criteria : None IP Sub-Criteria : None
IPv6 Enabled : False
DOT1P Class Policy Id : 0 DSCP Class Policy Id : 0
MPLS Lsp Exp Class Policy*: 0
Name : default
Description : Default SAP ingress QoS policy.
-------------------------------------------------------------------------------
FC Queue MCast Queue Use Dei
-------------------------------------------------------------------------------
be 1 1 false
l2 1 1 false
af 1 1 false
l1 1 1 false
h2 1 1 false
ef 1 1 false
h1 1 1 false
nc 1 1 false
-------------------------------------------------------------------------------
FC Meter MCast Meter Use Dei
-------------------------------------------------------------------------------
be - - false
l2 - - false
af - - false
l1 - - false
h2 - - false
ef - - false
h1 - - false
nc - - false
-------------------------------------------------------------------------------
Queue Rates and Rules
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId CIR CIR Adpt Rule PIR PIR Adpt Rule
-------------------------------------------------------------------------------
Queue1 0 closest max closest
-------------------------------------------------------------------------------
Queue Priority and Weight Details
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId Priority Weight
-------------------------------------------------------------------------------
Queue1 1 1
-------------------------------------------------------------------------------
High Slope Non Ring
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 70 90 80
-------------------------------------------------------------------------------
Low Slope Non Ring
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 50 75 80
-------------------------------------------------------------------------------
High Slope Ring
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 70 90 80
-------------------------------------------------------------------------------
Low Slope Ring
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId State Start-Avg(%) Max-Avg(%) Max-Prob(%)
-------------------------------------------------------------------------------
Queue1 Down 50 75 80
-------------------------------------------------------------------------------
Slope Policies
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId CBS(KBytes) MBS(KBytes) Slope-Policy
-------------------------------------------------------------------------------
Queue1 10 60 default
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
No Matching Criteria.
SAP Associations
-------------------------------------------------------------------------------
No Associations Found.
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS Admin MBS Admin
CIR Oper PIR Oper CBS Oper MBS Oper
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B>show>qos#
Label |
Description |
|---|---|
Policy-Id |
The ID that uniquely identifies the policy |
Scope |
Exclusive — Implies that this policy can only be applied to a single SAP Template — Implies that this policy can be applied to multiple SAPs on the router |
Description |
A text string that helps identify the policy’s context in the configuration file |
Default FC |
Specifies the default forwarding class for the policy |
Criteria-type |
IP — Specifies that an IP criteria-based SAP ingress policy is used to select the appropriate ingress meter and corresponding forwarding class for matched traffic MAC — Specifies that a MAC criteria-based SAP is used to select the appropriate ingress meters and corresponding forwarding class for matched traffic |
Meter |
Displays the meter ID |
Mode |
Specifies the configured mode of the meter (trTCM2 or srTCM) |
CIR Admin |
Specifies the administrative Committed Information Rate (CIR) parameters for the meters |
CIR Rule |
min — The operational CIR for the meters will be equal to or greater than the administrative rate specified using the rate command max — The operational CIR for the meter will be equal to or less than the administrative rate specified using the rate command closest — The operational PIR for the meters will be the rate closest to the rate specified using the rate command without exceeding the operational PIR |
PIR Admin |
Specifies the administrative Peak Information Rate (PIR) parameters for the meters |
PIR Rule |
min — The operational PIR for the meter will be equal to or greater than the administrative rate specified using the rate command max — The operational PIR for the meters will be equal to or less than the administrative rate specified using the rate command closest — The operational PIR for the meters will be the rate closest to the rate specified using the rate command |
CBS |
def — Specifies the default CBS value for the meters value — Specifies the value to override the default reserved buffers for the meters |
MBS |
def — Specifies the default MBS value value — Specifies the value to override the default MBS for the meter |
UCastM |
Specifies the default unicast forwarding type meters mapping |
MCastM |
Specifies the overrides for the default multicast forwarding type meter mapping |
BCastM |
Specifies the default broadcast forwarding type meters mapping |
UnknownM |
Specifies the default unknown unicast forwarding type meters mapping |
Match Criteria |
Specifies an IP or MAC criteria entry for the policy |
DSCP |
Specifies a DiffServ Code Point (DSCP) name used for an ingress SAP QoS policy match |
FC |
Specifies the entry’s forwarding class |
Src MAC |
Specifies a source MAC address or range to be used as a Service Ingress QoS policy match |
Dst MAC |
Specifies a destination MAC address or range to be used as a Service Ingress QoS policy match |
Dot1p |
Specifies a IEEE 802.1p value to be used as the match |
Ethernet-type |
Specifies an Ethernet type II Ether type value to be used as a Service Ingress QoS policy match |
FC |
Specifies the entry’s forwarding class |
Service-Id |
The unique service ID number which identifies the service in the service domain |
Customer-Id |
Specifies the customer ID which identifies the customer to the service |
SAP |
Specifies the a Service Access Point (SAP) within the service where the SAP ingress policy is applied |
Classifiers required |
Indicates the number of classifiers for a VPLS or Epipe service |
Meters required |
Indicates the number of meters for a VPLS or Epipe service |
Meters mode |
Displays the configured meter mode |
dot1p-classification [policy-id] [detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays dot1p-classification QoS policy information.
Displays information about the specific policy ID.
Displays detailed policy information.
The following output is an example of dot1p classification policy information, and Table: Output fields: dot1p classification describes the output fields.
Sample outputA:SAH01-050>config>qos>sap-ingress# show qos dot1p-classification 10
===============================================================================
DOT1P Classification Maps
===============================================================================
-------------------------------------------------------------------------------
Dot1P Class Id : 10
Description : (Not Specified)
-------------------------------------------------------------------------------
A:SAH01-050>config>qos>sap-ingress#
A:SAH01-050>config>qos>sap-ingress# show qos dot1p-classification 10 detail
===============================================================================
DOT1P Classification Maps
===============================================================================
-------------------------------------------------------------------------------
Dot1P Class Id : 10
Description : (Not Specified)
-------------------------------------------------------------------------------
Dot1P Bit Map Forwarding Class Profile
-------------------------------------------------------------------------------
6 h1 None
7 nc None
-------------------------------------------------------------------------------
Network Policy Associations
-------------------------------------------------------------------------------
No Network Policy Associations found.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP Ingress Associations
-------------------------------------------------------------------------------
SAP Ingress Id : 10
-------------------------------------------------------------------------------
===============================================================================
Label |
Description |
|---|---|
Dot1P Class Id |
The ID that uniquely identifies the policy |
Dot1P Bit Map |
The dot1p value specified in the policy |
Forwarding Class |
The forwarding class to assigned to the packet if the received packet's dot1p values match the dot1p value configured |
Description |
A text string that helps identify the policy’s context in the configuration file |
Profile |
Specifies the profile to be assigned to the packet |
dscp-classification [policy-id] [detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays DSCP classification QoS policy information.
Displays information about the specific policy ID.
Displays detailed policy information.
The following is an example of DSCP classification information, and Table: Output fields: DSCP classification describes the output fields.
Sample output*A:SAH01-071>config>qos# show qos dscp-classification 6335 detail
===============================================================================
DSCP Classification Maps
===============================================================================
-------------------------------------------------------------------------------
Dscp Class Id : 6335
Description : (Not Specified)
-------------------------------------------------------------------------------
Dscp Bit Map Forwarding Class Profile
-------------------------------------------------------------------------------
cp7 nc In
cp15 h1 In
cp23 ef In
cp31 h2 In
cp39 l1 In
cp47 af In
cp55 l2 In
-------------------------------------------------------------------------------
Network Policy Associations
-------------------------------------------------------------------------------
No Network Policy Associations found.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP Ingress Associations
-------------------------------------------------------------------------------
SAP Ingress Id : 17
-------------------------------------------------------------------------------
===============================================================================
Label |
Description |
|---|---|
Dot1P Class Id |
The ID that uniquely identifies the policy |
Dot1P Bit Map |
The dot1p value specified in the policy |
Forwarding Class |
The forwarding class to assigned to the packet if the received packet's dot1p values match the dot1p value configured |
Description |
A text string that helps identify the policy’s context in the configuration file |
Profile |
Specifies the profile to be assigned to the packet |