slope-policy [slope-policy-name] [detail]
show>qos
Supported on all 7210 SAS platforms as described in this document
This command displays slope policy information.
Specifies the name of the slope policy.
Displays detailed information about the slope policy.
The following output is an example of QoS slope policy information, and Table: Output fields: QoS slope policy describes the output fields.
Sample output*A:SAH01-051>show>qos# slope-policy "default"
===============================================================================
QoS Slope Policy
===============================================================================
Policy : default
Description : Default slope policy.
-------------------------------------------------------------------------------
High Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 70 Admin State : Disabled
Max Avg : 90 Max Prob. : 80
-------------------------------------------------------------------------------
Low Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 50 Admin State : Disabled
Max Avg : 75 Max Prob. : 80
-------------------------------------------------------------------------------
High Slope Ring Parameters
-------------------------------------------------------------------------------
Start Avg : 70 Admin State : Disabled
Max Avg : 90 Max Prob. : 80
-------------------------------------------------------------------------------
Low Slope Ring Parameters
-------------------------------------------------------------------------------
Start Avg : 50 Admin State : Disabled
Max Avg : 75 Max Prob. : 80
===============================================================================
*A:SAH01-051>show>qos#
*A:SAH01-051>show>qos# slope-policy detail
===============================================================================
QoS Slope Policy
===============================================================================
Policy : default
Description : Default slope policy.
-------------------------------------------------------------------------------
High Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 70 Admin State : Disabled
Max Avg : 90 Max Prob. : 80
-------------------------------------------------------------------------------
Low Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 50 Admin State : Disabled
Max Avg : 75 Max Prob. : 80
-------------------------------------------------------------------------------
High Slope Ring Parameters
-------------------------------------------------------------------------------
Start Avg : 70 Admin State : Disabled
Max Avg : 90 Max Prob. : 80
-------------------------------------------------------------------------------
Low Slope Ring Parameters
-------------------------------------------------------------------------------
Start Avg : 50 Admin State : Disabled
Max Avg : 75 Max Prob. : 80
-------------------------------------------------------------------------------
SAP Ingress
-------------------------------------------------------------------------------
SAP Ingress Policy Id : 1
Queue Ids : 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP Egress
-------------------------------------------------------------------------------
SAP Egress Policy Id : 1
Queue Ids : 1
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Network Ingress
------------------------------------------------------------------------------
Network Ingress Policy Id : 1
Queue Ids : 1, 2, 3, 4, 5, 6, 7, 8
------------------------------------------------------------------------------
Network Queues
------------------------------------------------------------------------------
Network Queue Policy Name : default
Queue Ids : 1, 2, 3, 4, 5, 6, 7, 8
------------------------------------------------------------------------------
==============================================================================
*A:SAH01-051>show>qos#
Label |
Description |
|---|---|
Policy |
The ID that uniquely identifies the policy |
Description |
A string that identifies the policy’s context in the configuration file |
Time Avg |
The weighting between the previous shared buffer average utilization result and the new shared buffer utilization |
Slope Parameters |
|
Start Avg |
Specifies the low priority or high priority RED slope position for the shared buffer average utilization value where the packet discard probability starts to increase above zero |
Max Avg |
Specifies the percentage of the shared buffer space for the buffer pool at which point the drop probability becomes 1, expressed as a decimal integer |
Admin State |
Up — The administrative status of the RED slope is enabled Down — The administrative status of the RED slope is disabled Specifies the low priority or high priority RED slope position for the maximum non-one packet discard probability value before the packet discard probability rises directly to one |
Max Prob. |
Specifies the high priority RED slope position for the maximum non-one packet discard probability value before the packet discard probability rises directly to one |