The following command outputs are examples only; actual displays may differ depending on supported functionality and user configuration.
detail
show>router>pcep>pcc
Supported on all 7210 SAS platforms as described in this document
This command displays PCEP PCC detailed information.
The following output is an example of PCEP PCC detailed information, and Table: Output fields: PCEP PCC describes the output fields.
Sample output*A:ZBG>show>router>pcep# pcc detail
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Down Oper Status : Down
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 50 seconds DeadTimer Interval : 150 seconds
Capabilities List : stateful-delegate stateful-pce rsvp-path
Address : 10.10.10.10
Report Path Constraints: True
Open Wait Timer : 60 seconds Keep Wait Timer : 60 seconds
Sync Timer : 60 seconds Request Timer : 120 seconds
Connection Timer : 60 seconds Allow Negotiations : False
Max Sessions : 1 Max Unknown Req : 1000
===============================================================================
*A:ZBG>show>router>pcep#
Label |
Description |
|---|---|
Admin Status |
The administrative status of the PCC |
Oper Status |
The operational status of the PCC |
Unknown Msg Limit |
The maximum rate of unknown messages that can be received on a PCEP session |
Keepalive Interval |
The specified keepalive interval for the PCEP session |
DeadTimer Interval |
The specified dead time interval for the PCEP session |
Capabilities List |
The capabilities list for the PCEP session |
Address |
The local IP address of the PCEP speaker |
Report Path Constraints |
Indicates whether to include LSP path constraints in the PCE report messages sent from the PCC to a PCE |
Open Wait Timer |
The value of the open wait timer for the PCEP session |
Keep Wait Timer |
The value of the keep wait timer for the PCEP session |
Sync Timer |
The value of the synchronization timer for the PCEP session |
Request Timer |
The value of the request timer for the PCEP session |
Connection Timer |
The value of the keep wait timer for the PCEP session |
Allow Negotiations |
Indicates where negotiations between PCEP PCC and PCE are allowed |
Max Sessions |
The maximum number of PCEP sessions on the router |
Max Unknown Req |
The maximum number of unknown requests for PCEP sessions on the router |
lsp-db [lsp-type lsp_type] [delegated-pce ip-address]
lsp-db [lsp-type lsp_type] from ip-address [delegated-pce ip-address]
lsp-db [lsp-type lsp_type] lsp lsp-name [delegated-pce ip-address]
lsp-db [lsp-type lsp_type] to ip-address [tunnel-id [tunnel-id]]
lsp-db [lsp-type lsp_type] tunnel-id [tunnel-id]
show>router>pcep>pcc
Supported on all 7210 SAS platforms as described in this document
This command displays PCEP PCC LSP information.
Specifies the type of LSP to display. The only available option is RSVP-TE point-to-point LSPs (rsvp-p2p).
Specifies a tunnel ID.
Specifies an IPv4 address.
The following output is an example of PCEP PCC LSP information, and Table: Output fields: PCEP PCC LSP describes the output fields.
Sample output*A:ZBG# show router pcep pcc lsp-db
===============================================================================
PCEP Path Computation Client (PCC) LSP Update Info
===============================================================================
PCEP-specific LSP ID: 1
LSP ID : 21504 LSP Type : rsvp-p2p
Tunnel ID : 1 Extended Tunnel Id : 10.20.1.3
LSP Name : test_lsp::fully_loose
Source Address : 10.20.1.3 Destination Address : 10.20.1.1
LSP Delegated : True Delegate PCE Address: 10.120.210.36
Oper Status : active
-------------------------------------------------------------------------------
PCEP-specific LSP ID: 2
LSP ID : 21510 LSP Type : rsvp-p2p
Tunnel ID : 1 Extended Tunnel Id : 10.20.1.3
LSP Name : test_lsp::stdby_fully_loose_2
Source Address : 10.20.1.3 Destination Address : 10.20.1.1
LSP Delegated : True Delegate PCE Address: 10.120.210.36
Oper Status : up
===============================================================================
*A:ZBG#
Label |
Description |
|---|---|
PCEP-specific LSP ID |
The PCEP-specific LSP identifier |
LSP ID |
The LSP identifier |
Tunnel ID |
The tunnel identifier for the LSP |
LSP Name |
The configured LSP name |
Source Address |
The source IP address of the LSP |
LSP Delegated |
The delegation status of the LSP |
Oper Status |
The operational status of the LSP |
LSP Type |
The type of the LSP |
Extended Tunnel Id |
The expanded tunnel identifier for the LSP |
Destination Address |
The destination IP address of the LSP |
Delegate PCE Address |
The IP address of the delegate PCE router |
path-request [lsp-type {rsvp-p2p}] [dest ip-address] [detail]
show>router>pcep>pcc
Supported on all 7210 SAS platforms as described in this document
This command displays PCEP PCC path request information.
Specifies the type of LSP to display. The only available option is RSVP-TE point-to-point LSPs.
Specifies the destination IPv4 address to display.
Displays detailed path request information.
The following output is an example of PCEP PCC path request information, and Table: Output fields: PCEP PCC path request describes the output fields.
Sample output*A:ZBG# show router pcep pcc path-request
===============================================================================
PCEP Path Computation Client (PCC) Path Computation Request (PCReq) Info
===============================================================================
Request ID : 4 Message State : sent-for-compute
Tunnel ID : 2 Extended Tunnel Id : 10.20.1.3
LSP ID : 62468 LSP Type : rsvp-p2p
LSP Name : test_lsp::fully_loose
Source Address : 10.20.1.3 Destination Address: 10.20.1.1
SVEC Id : 4 LSP Bandwidth : 0
===============================================================================
*A:ZBG#
Label |
Description |
|---|---|
Request ID |
The PCEP PCC path request identifier |
Tunnel ID |
The tunnel identifier for the LSP |
LSP ID |
The LSP identifier |
LSP Name |
The configured LSP name |
Source Address |
The source IP address of the LSP |
SVEC Id |
The synchronization vector identifier |
Message State |
The current state of the request |
Extended Tunnel Id |
The expanded tunnel identifier for the LSP |
LSP Type |
The type of the LSP |
Destination Address |
The destination IP address of the LSP |
LSP Bandwidth |
The bandwidth of the LSP |
peer [ip-address] [detail]
show>router>pcep>pcc
Supported on all 7210 SAS platforms as described in this document
This command displays PCEP PCC peer information.
Specifies a peer IPv4 address to display.
Displays detailed peer information.
The following output is an example of a PCEP PCC peer information, and Table: Output fields: PCEP PCC peer describes the output fields.
Sample output*A:ZBG>show>router>pcep>pcc# peer detail
===============================================================================
PCEP Path Computation Client (PCC) Peer Info
===============================================================================
IP Address : 10.10.10.11
Admin Status : Down Oper Status : Down
Peer Capabilities : (Not Specified)
Speaker ID : (Undefined)
Sync State : not-initialized Peer Overloaded : False
Session Establish Time: 0d 00:00:00
Oper Keepalive : N/A Oper DeadTimer : N/A
Session Setup Count : 0 Session Setup Fail Count: 0
-------------------------------------------------------------------------------
Statistics Information
-------------------------------------------------------------------------------
Sent Received
-------------------------------------------------------------------------------
PC Request Message 0 0
PC Reply Message 0 0
PC Error Message 0 0
PC Notification Message 0 0
PC Keepalive Message 0 0
PC Update Message 0 0
PC Report Message 0 0
Path Report 0 0
Path Request 0 0
-------------------------------------------------------------------------------
===============================================================================
*A:ZBG>show>router>pcep>pcc#
Label |
Description |
|---|---|
IP Address |
The IP address of the PCC peer |
Admin Status |
The administrative status of the PCC peer |
Oper Status |
The operational status of the PCC peer |
Peer Capabilities |
The PCEP capabilities of the PCC peer |
Speaker ID |
The IP address of the PCC peer speaker |
Sync State |
The synchronization state of the |
Peer Overloaded |
Indicates whether the PCC peer is overloaded |
Session Establish Time |
The length of time since the PCEP session was established |
Oper Keepalive |
The operational value for the PCC peer keepalive timer |
Oper DeadTimer |
The operational value for the PCC peer dead timer |
Session Setup Count |
The number of times that the PCEP session has been set up |
Session Setup Fail Count |
The number of times that the PCEP session failed to be set up |
Statistics Information |
|
PC Request Message |
The number of path computation (PC) request messages sent the PCC peer and received from the PCC peer |
PC Reply Message |
The number of PC reply messages sent to the PCC peer and received from the PCC peer |
PC Error Message |
The number of PC error messages sent to the PCC peer and received from the PCC peer |
PC Notification Message |
The number of PC notification messages sent to the PCC peer and received from the PCC peer |
PC Keepalive Message |
The number of PC keepalive messages sent to the PCC peer and received from the PCC peer |
PC Update Message |
The number of PC update messages sent to the PCC peer and received from the PCC peer |
PC Report Message |
The number of PC report messages sent to the PCC peer and received from the PCC peer |
Path Report |
The number of path reports sent to the PCC peer and received from the PCC peer |
Path Request |
The path requests sent to the PCC peer and received from the PCC peer |
status
show>router>pcep>pcc
Supported on all 7210 SAS platforms as described in this document
This command displays PCEP PCC status information.
The following output is an example of PCEP PCC status information, and Table: Output fields: PCEP PCC status describes the output fields.
Sample output*A:ZBG>show>router>pcep>pcc# status
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Down Oper Status : Down
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 50 seconds DeadTimer Interval : 150 seconds
Capabilities List : stateful-delegate stateful-pce rsvp-path
Address : 10.10.10.10
Report Path Constraints: True
-------------------------------------------------------------------------------
PCEP Path Computation Client (PCC) Peer Info
-------------------------------------------------------------------------------
Peer Admin State/Oper State Oper Keepalive/Oper DeadTimer
-------------------------------------------------------------------------------
10.10.10.11 Down/Down Not-Applicable/Not-Applicable
-------------------------------------------------------------------------------
===============================================================================
*A:ZBG>show>router>pcep>pcc#
Label |
Description |
|---|---|
Admin Status |
The administrative status of the PCC |
Oper Status |
The operational status of the PCC |
Unknown Msg Limit |
The maximum rate of unknown messages that can be received on a PCEP session |
Keepalive Interval |
The specified keepalive interval for the PCEP session |
DeadTimer Interval |
The specified dead time interval for the PCEP session |
Capabilities List |
The capabilities list for the PCEP session |
Address |
The local IP address of the PCEP speaker |
Report Path Constraints |
Indicates whether to include LSP path constraints in the PCE report messages sent from the PCC to a PCE |
PCEP Path Computation Client (PCC) peer info |
|
Peer |
The IP address of the PCC peer |
Admin State/Oper State |
The administrative and operational states of the PCC peer |
Oper Keepalive/Oper DeadTimer |
The operational keepalive and dead timer intervals of the PCC peer |