queue-mgmt [name] [detail]
show>qos
7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
This command displays queue management policy information.
Specifies the name of the queue management policy.
Displays detailed information about the queue management policy.
The following output is an example of queue management policy information, and Table: Output fields: queue management policy describes the output fields.
Sample output for 7210 SAS-R6 IMM-b, 7210 SAS-R12 IMM-b, and 7210 SAS-Mxp*A:Dut-A>config# /show qos queue-mgmt 100 detail
===============================================================================
QoS Queue Management Policy
===============================================================================
Policy : 100
Description : (Not Specified)
CBS : 100 MBS : 200
Time Avg : 7
High Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 70 Admin State : Enabled
Max Avg : 90 Max Prob. : 75
Low Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 50 Admin State : Enabled
Max Avg : 75 Max Prob. : 75
Associations
SAP Egress
-------------------------------------------------------------------------------
No SAP Egress Associations found.
-------------------------------------------------------------------------------
Network Queues
-------------------------------------------------------------------------------
No Network Queue Policy Associations found.
-------------------------------------------------------------------------------
Access Egress
-------------------------------------------------------------------------------
Access Egress Policy Id : 199
Queue Ids : 1, 2, 3, 4, 5, 6, 7, 8
-------------------------------------------------------------------------------
Access-Port Associations
-------------------------------------------------------------------------------
Port-id : 1/1/6
-------------------------------------------------------------------------------
Access Egress Queue Override
-------------------------------------------------------------------------------
No Access Egress queue override Associations found.
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-A>config# /show qos queue-mgmt 200 detail
===============================================================================
QoS Queue Management Policy
===============================================================================
Policy : 200
Description : (Not Specified)
CBS : 125 MBS : 500
Time Avg : 7
High Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 70 Admin State : Enabled
Max Avg : 90 Max Prob. : 75
Low Slope Parameters
-------------------------------------------------------------------------------
Start Avg : 50 Admin State : Disabled
Max Avg : 75 Max Prob. : 75
Associations
SAP Egress
-------------------------------------------------------------------------------
No SAP Egress Associations found.
-------------------------------------------------------------------------------
Network Queues
-------------------------------------------------------------------------------
Network Queue Policy Name : 200
Queue Ids : 1, 2, 3, 4, 5, 6, 7, 8
-------------------------------------------------------------------------------
Network-Port Associations
-------------------------------------------------------------------------------
Port-id : 1/1/26
-------------------------------------------------------------------------------
Access Egress
-------------------------------------------------------------------------------
No Access Egress Associations found.
-------------------------------------------------------------------------------
Access Egress Queue Override
-------------------------------------------------------------------------------
Port-id : 1/1/6 Queue Ids : 1
-------------------------------------------------------------------------------
===============================================================================
| Label | Description |
|---|---|
Policy |
Displays the ID that uniquely identifies the policy |
Description |
Displays a string that identifies the policy’s context in the configuration file |
Time Avg |
Displays the weighting between the previous shared buffer average utilization result and the new shared buffer utilization |
CBS |
Displays the committed burst size |
MBS |
Displays the maximum burst size |
Slope Parameters |
|
Start Avg |
Displays, in percentage, the low priority or high priority RED slope position for the shared buffer average utilization value where the packet discard probability starts to increase above zero |
Max Avg |
Displays the percentage of the shared buffer space for the buffer pool at which point the drop probability becomes 1, expressed as a decimal integer |
Admin State |
Up — The administrative status of the RED slope is enabled Down — The administrative status of the RED slope is disabled |
Max Prob. |
Specifies the high priority RED slope position for the maximum non-one packet discard probability value before the packet discard probability rises directly to one |
Service Associations |
|
SAP Egress Policy Id |
Displays the SAP egress policy ID |
Queue Ids |
Displays the queue IDs |
Access Egress Associations |
|
Access Egress Policy Id |
Displays the access-egress policy ID |
Queue Ids |
Displays the queue IDs |
Access-Port Associations |
|
Port-id |
Displays the port ID |