group [group-name] [detail]
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays information about MSDP groups.
Displays information about the specified group name, up to 32 characters. If no group-name is specified, information about all group names displays.
Displays detailed MSDP group information.
The following output is an example of MSDP group information, and Table: Output fields: MSDP group describes the output fields.
Sample output*A:ALA-48>show>router>msdp# group
===============================================================================
MSDP Groups
===============================================================================
Group Name Mode Act Srcs Local Address
-------------------------------------------------------------------------------
main Mesh-group None None
loop1 Mesh-group None None
loop2 Mesh-group None None
loop3 Mesh-group None None
loop4 Mesh-group None None
loop5 Mesh-group None None
-------------------------------------------------------------------------------
Groups : 6
=======================
*A:ALA-48>show>router>msdp#
*A:ALA-48>show>router>msdp# group test
===============================================================================
MSDP Groups
===============================================================================
Group Name Mode Act Srcs Local Address
-------------------------------------------------------------------------------
test Mesh-group 50000 10.10.10.103
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:ALA-48>show>router>msdp#
*A:ALA-48>show>router>msdp# group test detail
===============================================================================
MSDP Groups
===============================================================================
Group Name : test
-------------------------------------------------------------------------------
Local Address : 10.10.10.103
Admin State : Up Receive Msg Rate : None
Receive Msg Time : None Receive Msg Thd : None
Mode : Mesh-group SA Limit : 50000
Export Policy : None Specified / Inherited
Import Policy : None Specified / Inherited
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:ALA-48>show>router>msdp#
Label |
Description |
|---|---|
Group Name |
Displays the MSDP group name. |
Mode |
Displays the groups of peers in a full mesh topology to limit excessive flooding of SA messages to neighboring peers. |
Act Srcs |
Displays the configured maximum number of active source messages that are accepted by MSDP. |
Local Address |
Displays the local end of an MSDP session. |
Admin State |
Displays the administrative state. |
Receive Msg Rate |
Displays the rate at which the messages are read from the TCP session. |
Receive Msg Time |
Displays the time of MSDP messages that are read from the TCP session within the configured number of seconds. |
Receive Msg Thd |
Displays the configured threshold number of MSDP messages that can be processed before the MSDP message rate limiting function. |
SA Limit |
Displays the SA limit. |
peer [ip-address] [group group-name] [detail]
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays information about MSDP peers.
Displays information about the specified IP address. If no IP address is specified, information about all MSDP IP addresses displays.
Displays information about the specified group name. If no group-name is specified, information about all MSDP peers displays.
Displays detailed MSDP peer information.
The following output is an example of MSDP peer information, and Table: Output fields: MSDPpeer describes the output fields.
Sample outputA:ALA-48# show router msdp peer
=============================================================================
MSDP Peers
=============================================================================
Peer Local Address State Last State Change SA Learnt
-----------------------------------------------------------------------------
10.20.1.1 10.20.1.6 Established 08/30/2002 03:22:131008
-----------------------------------------------------------------------------
Peers : 1
=============================================================================
A:ALA-48#
A:ALA-48# show router msdp peer detail
===============================================================================
MSDP Peers
-------------------------------------------------------------------------------
Peer Address : 10.20.1.1
-------------------------------------------------------------------------------
Group Name : None
Local Address : 10.20.1.6
Last State Change : 08/30/2002 03:22:13 Last Act Src Limit : N/A
Peer Admin State : Up Default Peer : No
Peer Connect Retry : 0 State : Established
SA accepted : 1008 SA received : 709
State timer expires: 18 Peer time out : 62
Active Source Limit: None Receive Msg Rate : 0
Receive Msg Time : 0 Receive Msg Thd : 0
Auth Status : Disabled Auth Key : None
Export Policy : None Specified / Inherited
Import Policy : None Specified / Inherited
-------------------------------------------------------------------------------
Peers : 1
===============================================================================
A:ALA-48#
Label |
Description |
|---|---|
Peer |
Displays the IP address of the peer. |
Local Address |
Displays the local IP address. |
State |
Displays the current state of the peer. |
Last State Change |
Displays the date and time of the peer’s last state change. |
SA Learn |
Displays the number of SA messages learned through a peer. |
source [ip-address/mask] [type {configured | dynamic | both}] [detail]
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays the discovery method for this multicast source.
Displays user-created sources.
Displays dynamically created sources.
Displays both user-configured and dynamically created sources.
Displays detailed MSDP source information.
The following output is an example of MSDP source information, and Table: Output fields: MSDP source describes the output fields.
Sample output*A:Dut-G>config>router>msdp>source# /show router msdp source
===============================================================================
MSDP Sources
===============================================================================
Source Type SA Limit Num Excd Last Exceeded
-------------------------------------------------------------------------------
100.112.1.2/32 Configured 10 0 N/A
-------------------------------------------------------------------------------
Sources : 1
===============================================================================
Label |
Description |
|---|---|
Source |
Displays the source address. |
Type |
Displays the source type. |
SA Limit |
Displays the limit of SA messages allowed. |
Num Excd |
Displays the number of SA messages that have exceeded the limit. |
Last Exceeded |
Displays the date and time that the limit was last exceeded. |
Sources |
Displays the number of sources. |
source-active [{group ip-address | local | originator ip-address | peer ip-address | source ip-address | group ip-address source ip-address}] [detail]
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays SA messages accepted by MSDP.
Displays information about the specified group IP address.
Displays information about local SA messages.
Displays information about the specified originator IP address.
Displays information about the specified peer IP address.
Displays information about the specified source IP address.
Displays information about the specified group IP address.
Displays detailed MSDP SA information.
The following output is an example of MSDP SA information, and Table: Output fields: MSDP source-active describes the output fields.
Sample outputA:ALA-48# show router msdp source-active
===============================================================================
MSDP Source Active Info
===============================================================================
Grp Address Src Address Origin RP Peer Address State Timer
-------------------------------------------------------------------------------
239.100.0.0 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.1 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.2 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.3 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.4 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.5 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.6 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.7 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.8 10.112.1.2 10.20.1.1 10.20.1.1 69
239.100.0.9 10.112.1.2 10.20.1.1 10.20.1.1 69
-------------------------------------------------------------------------------
MSDP Source Active : 10
===============================================================================
A:ALA-48#
A:ALA-48# show router msdp source-active detail
===============================================================================
MSDP Source Active
===============================================================================
Group Address : 239.100.0.0 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 3d 01:44:25
Group Address : 239.100.0.1 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.2 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.3 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.4 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.5 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.7 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.8 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
Group Address : 239.100.0.9 Source Address : 10.112.1.2
Origin RP : 10.20.1.1 Peer Address : 10.20.1.1
State Timer : 64 Up Time : 48d 18:22:29
-------------------------------------------------------------------------------
MSDP Source Active : 10
===============================================================================
A:ALA-48#
Label |
Description |
|---|---|
Grp Address |
Displays the IP address of the group. |
Src Address |
Displays the IP address of the source. |
Origin RP |
Displays the origination RP address. |
Peer Address |
Displays the address of the peer. |
State Timer |
Displays the time-out value. If the value reaches zero, the SA is removed. |
source-active-rejected [peer-group name] [group ip-address] [source ip-address] [originator ip-address] [peer ip-address]
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays SA messages rejected by MSDP.
Displays information about rejected SA messages for the specified peer group.
Displays information about the specified group IP address.
Displays information about the source address of the SA entry that is rejected.
Displays information about the specified originator IP address.
Displays information about the peer from which this rejected SA entry was last received.
The following output is an example of MSDP rejected SA information, and Table: Output fields: MSDP source-active rejected describes the output fields.
Sample output*A:ALA-48# show router msdp source-active-rejected
===============================================================================
MSDP Source Active Rejected Info
===============================================================================
Grp Address Src Address Origin RP Peer Address Reject Reason
-------------------------------------------------------------------------------
239.100.0.1 10.0.0.1 10.20.0.1 239.0.0.1 Import Policy
239.100.0.2 10.0.0.2 10.20.0.2 239.0.0.2 Export Policy
239.100.0.3 10.0.0.3 10.20.0.3 239.0.0.3 RPF Failure
239.100.0.4 10.0.0.4 10.20.0.4 239.0.0.4 Limit Exceeded
239.100.0.5 10.0.0.5 10.20.0.5 239.0.0.5 Limit Exceeded
239.100.0.6 10.0.0.6 10.20.0.6 239.0.0.6 Limit Exceeded
239.100.0.7 10.0.0.7 10.20.0.7 239.0.0.7 Limit Exceeded
-------------------------------------------------------------------------------
SA Rejected Entries : 7
===============================================================================
*A:ALA-48#
Label |
Description |
|---|---|
Grp Address |
Displays the IP address of the group. |
Src Address |
Displays the IP address of the source. |
Origin RP |
Displays the origination rendezvous point (RP) address. |
Peer Address |
Displays the address of the peer. |
Reject Reason |
Displays the reason why this source active entry is rejected. |
statistics [peer ip-address]
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays statistics information related to an MSDP peer.
Displays information about the specified peer IP address.
The following output is an example of MSDP statistics information, and Table: Output fields: MSDP statistics describes the output fields.
Sample outputA:ALA-48# show router msdp statistics
===============================================================================
MSDP Statistics
===============================================================================
Glo ActSrc Lim Excd: 0
-------------------------------------------------------------------------------
Peer Address : 10.20.1.1
-------------------------------------------------------------------------------
Last State Change : 0d 11:33:16 Last message Peer : 0d 00:00:17
RPF Failures : 0 Remote Closes : 0
SA Msgs Sent : 0 SA Msgs Recvd : 709
SA req. Msgs Sent : 0 SA req. Msgs Recvd : 0
SA res. Msgs Sent : 0 SA res. Msgs Recvd : 0
KeepAlive Msgs Sent: 694 KeepAlive Msgs Recd: 694
Unknown Msgs Sent : 0 Error Msgs Recvd : 0
-------------------------------------------------------------------------------
Peers : 1
===============================================================================
A:ALA-48#
Label |
Description |
|---|---|
Last State Change |
Displays the date and time the peer state changed. |
RPF Failures |
Displays the number of RPF failures. |
SA Msgs Sent |
Displays the number of SA messages sent. |
SA req. Msgs Sent |
Displays the number of SA request messages sent. |
SA res. Msgs Sent |
Displays the number of SA response messages sent. |
KeepAlive Msgs Sent |
Displays the number of keepalive messages sent. |
Unknown Msgs Sent |
Displays the number of unknown messages received. |
Last message Peer |
Displays the time the last message was received from the peer. |
Remote Closes |
Displays the number of times the remote peer close. |
SA Msgs Recvd |
Displays the number of SA messages received. |
SA req. Msgs Recvd |
Displays the number of SA request messages received. |
SA res. Msgs Recvd |
Displays the number of SA response messages received. |
KeepAlive Msgs Recd |
Displays the number of keepalive messages received. |
Error Msgs Recvd |
Displays the number of unknown messages received. |
status
show>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command displays MSDP status information.
The following output is an example of MSDP status information, and Table: Output fields: MSDP status describes the output fields.
Sample outputA:ALA-48# show router msdp status
===============================================================================
MSDP Status
===============================================================================
Admin State : Up
Local Address : None
Global Statistics
Active Src Limit : None
Act Src Lim Excd : 0
Num. Peers : 1
Num. Peers Estab : 1
Num. Source Active : 10
Policies : None
Data Encapsulation : Enabled
Receive Msg Rate
Rate : 0
Time : 0
Threshold : 0
Last Msdp Enabled : 08/30/2002 03:21:43
===============================================================================
A:ALA-48#
Label |
Description |
|---|---|
Admin State |
Displays the administrative state. |
Local Address |
Displays the local IP address. |
Active Src Limit |
Displays the active source limit. |
Act Src Lim Excd |
Displays the active source limit which has been exceeded. |
Num. Peers |
Displays the number of peers. |
Num. Peers Estab |
Displays the number of peers established. |
Num. Source Active |
Displays the number of active sources. |
Policies |
Displays the policy to export the SA state from the SA list into MSDP. |
Data Encapsulation |
Displays the RP using MSDP to encapsulate multicast data received in MSDP register messages inside forwarded MSDP SA messages. |
Rate |
Displays the receive message rate. |
Time |
Displays the receive message time. |
Threshold |
Displays the number of MSDP messages that can be processed before the MSDP message rate limiting function is activated. |
RPF Table |
Displays the name of the reverse path forwarding table. |
Last msdp Enabled |
Displays the time the last MSDP was triggered. |