customer [customer-id] [site customer-site-name]
show>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays service customer information.
Displays only information for the specified customer ID.
Specifies the customer site which is an anchor point for an ingress and egress virtual scheduler hierarchy.
The following output is an example of service customer information, and Table: Output Fields: Customer describes the output fields.
Sample output*A:ALA-12# show service customer
==========================================================
Customers
==========================================================
Customer-ID : 1
Contact : Manager
Description : Default customer
Phone : (123) 555-1212
Customer-ID : 2
Contact : Tech Support
Description : TiMetra Networks
Phone : (234) 555-1212
Customer-ID : 3
Contact : Fred
Description : TiMetra Networks
Phone : (345) 555-1212
Customer-ID : 6
Contact : Ethel
Description : Epipe Customer
Phone : (456) 555-1212
Customer-ID : 7
Contact : Lucy
Description : ABC Customer
Phone : (567) 555-1212
Customer-ID : 8
Contact : Customer Service
Description : IES Customer
Phone : (678) 555-1212
Customer-ID : 274
Contact : Mssrs. Beaucoup
Description : ABC Company
Phone : 650 123-4567
Customer-ID : 94043
Contact : Test Engineer on Duty
Description : TEST Customer
Phone : (789) 555-1212
------------------------------------------------------
Total Customers : 8
-----------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show service customer 274
==============================================================================
Customer 274
==============================================================================
Customer-ID : 274
Contact : Mssrs. Beaucoup
Description : ABC Company
Phone : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site : west
Description : (Not Specified)
==============================================================================
*A:ALA-12#
*A:ALA-12# show service customer 274 site west
==============================================================================
Customer 274
==============================================================================
Customer-ID : 274
Contact : Mssrs. Beaucoup
Description : ABC Company
Phone : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site : west
Description : (Not Specified)
Assignment : Card 5
I. Sched Pol: SLA1
E. Sched Pol: (Not Specified)
------------------------------------------------------------------------------
Service Association
------------------------------------------------------------------------------
No Service Association Found.
==============================================================================
*A:ALA-12#
|
Label |
Description |
|---|---|
|
|
The ID that uniquely identifies a customer. |
|
|
The name of the primary contact person. |
|
|
Generic information about the customer. |
|
|
The phone/pager number to reach the primary contact person. |
|
|
The total number of customers configured. |
|
Multi-service site |
|
|
|
Multi-service site name. A multi-service customer site is a group of SAPs with common origination and termination points. |
|
|
Information about a specific customer's multi-service site. |
|
|
The port ID, MDA, or card number, where the SAPs that are members of this multi-service site are defined. |
|
|
The ingress QoS scheduler policy assigned to this multi-service site. |
|
|
The egress QoS scheduler policy assigned to this multi-service site. |
|
Service Association |
|
|
|
The ID that uniquely identifies a service. |
|
|
Specifies the SAP assigned to the service. |
sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] filter filter-id
sap-using [ingress] qos-policy qos-policy-id
show>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
Displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs. The optional parameters restrict output to only SAPs matching the specified properties.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
Specifies matching an ingress policy.
Specifies matching an egress policy.
Specifies the ingress or egress filter policy ID for which to display matching SAPs.
Specifies matching SAPs with the specified IP interface.
Specifies the IP address of the interface for which to display matching SAPs.
Specifies the IP interface name for which to display matching SAPs.
The following output is an example of SAP information, and Table: Output Fields: SAP-using describes the output fields.
Sample output*A:DUT-B# show service sap-using sap 1/1/3:100.*
=========================================================================
Service Access Points
=========================================================================
PortId SvcId Ing. Ing. Egr. Adm Opr
QoS Fltr Fltr
-------------------------------------------------------------------------
1/1/1 6 1 none none Up Down
1/1/2 700 1 none none Up Down
-------------------------------------------------------------------------
Number of SAPs : 2
=========================================================================
*A:DUT-B#
|
Label |
Description |
|---|---|
|
|
The ID of the access port where the SAP is defined. |
|
|
The value that identifies the service. |
|
|
The SAP MTU value. |
|
|
The SAP ingress QoS policy number specified on the ingress SAP. |
|
|
The MAC or IP filter policy ID applied to the ingress SAP. |
|
|
The SAP egress QoS policy number specified on the egress SAP. |
|
|
The MAC or IP filter policy ID applied to the egress SAP. |
|
|
The accounting policy ID assigned to the SAP. |
|
|
The administrative state of the SAP. |
|
|
The actual state of the SAP. |
service-using [ies] [customer customer-id]
show>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays the services matching certain usage properties. If no optional parameters are specified, all services defined on the system are displayed.
Displays matching IES services.
Displays services only associated with the specified customer ID.
The following output is an example of service information, and Table: Output Fields: Service-using describes the output fields.
Sample outputA:ALA-48# show service service-using ies
===============================================================================
Services [ies]
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
88 IES Up Down 8 07/25/2006 15:46:28
89 IES Up Down 8 07/25/2006 15:46:28
104 IES Up Down 1 07/25/2006 15:46:28
200 IES Up Down 1 07/25/2006 15:46:28
214 IES Up Down 1 07/25/2006 15:46:28
321 IES Up Down 1 07/25/2006 15:46:28
322 IES Down Down 1 07/25/2006 15:46:28
1001 IES Up Down 1730 07/25/2006 15:46:28
-------------------------------------------------------------------------------
Matching Services : 8
-------------------------------------------------------------------------------
A:ALA-48#
|
Label |
Description |
|---|---|
|
|
The value that identifies the service. |
|
|
Specifies the service type configured for the service ID. |
|
|
The administrative state of the service. |
|
|
The operating state of the service. |
|
|
The ID of the customer who owns this service. |
|
|
The date and time of the most recent management-initiated change to this service. |
id service-id {all | arp | base | sap | interface | mstp-configuration}
show>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays information for a particular service-id.
The unique service identification number to identify the service in the service domain.
Display detailed information about the service.
Display ARP entries for the service.
Display basic service information.
Display service interfaces.
Display MSTP information.
Display SAPs associated to the service.
Display split horizon group information.
all
show>service>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays detailed information for all aspects of the service.
The following output is an example of detailed service information, and Table: Output Fields: Service ID All describes the output fields.
Sample output (split horizon group)*A:SAS>show>service# id 10 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 10 Vpn Id : 0
Service Type : VPLS
Description : (Not Specified)
Customer Id : 1
Last Status Change: 07/22/2011 11:06:02
Last Mgmt Change : 07/22/2011 11:04:51
Admin State : Up Oper State : Up
MTU : 1450
MTU Check : Enabled
SAP Count : 2 SDP Bind Count : 2
Snd Flush on Fail : Disabled
Uplink Type: : MPLS
-------------------------------------------------------------------------------
Split Horizon Group specifics
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Split Horizon Group : test
-------------------------------------------------------------------------------
Description : test
Instance Id : 1 Last Change : 07/23/2011 11:40:50
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sdp Id 2:10 -(10.20.1.6)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 2:10 Type : Spoke
Split Horiz Grp : (Not Specified)
VC Type : VLAN VC Tag : 10
Admin Path MTU : 0 Oper Path MTU : 9186
Far End : 10.20.1.6 Delivery : MPLS
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 131063 Egress Label : 131067
Admin ControlWord : Preferred Oper ControlWord : True
Last Status Change : 07/22/2011 11:07:26 Signaling : TLDP
Last Mgmt Change : 07/22/2011 11:04:51 Force Vlan-Vc : Disabled
Flags : None
Peer Pw Bits : None
Peer Fault Ip : None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
BPDU Translation : Disabled
L2PT Termination : Disabled
MAC Pinning : Disabled
MAC Pinning : Disabled Block On Mesh Fail: False
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Fwd. Octs. : 0
E. Fwd. Pkts. : 1 E. Fwd. Octets : 98
Extra-Tag-Drop-Pkts: n/a Extra-Tag-Drop-Oc*: n/a
Associated LSP LIST :
Lsp Name : toF
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Stp Service Destination Point specifics
-------------------------------------------------------------------------------
Stp Admin State : Up Stp Oper State : Up
Core Connectivity : Down
Port Role : Designated Port State : Forwarding
Port Number : 2049 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : True
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : Rstp
Last BPDU from : N/A
Designated Bridge : This Bridge Designated Port Id: 34817
Fwd Transitions : 1 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 44265
-------------------------------------------------------------------------------
Sdp Id 4:10 -(10.20.1.3)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 4:10 Type : Spoke
Split Horiz Grp : (Not Specified)
VC Type : VLAN VC Tag : 10
Admin Path MTU : 0 Oper Path MTU : 9182
Far End : 10.20.1.3 Delivery : MPLS
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 131059 Egress Label : 131065
Admin ControlWord : Preferred Oper ControlWord : True
Last Status Change : 07/22/2011 11:07:26 Signaling : TLDP
Last Mgmt Change : 07/22/2011 11:04:51 Force Vlan-Vc : Disabled
Flags : None
Peer Pw Bits : None
Peer Fault Ip : None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
BPDU Translation : Disabled
L2PT Termination : Disabled
MAC Pinning : Disabled
MAC Pinning : Disabled Block On Mesh Fail: False
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 44285 I. Fwd. Octs. : 3852802
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
Extra-Tag-Drop-Pkts: n/a Extra-Tag-Drop-Oc*: n/a
Associated LSP LIST :
Lsp Name : toh2_facility
Admin State : Up Oper State : Up
Time Since Last Tr*: 01d00h37m
-------------------------------------------------------------------------------
Stp Service Destination Point specifics
-------------------------------------------------------------------------------
Stp Admin State : Up Stp Oper State : Up
Core Connectivity : Down
Port Role : Root Port State : Forwarding
Port Number : 2050 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : False
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : Rstp
Last BPDU from : 80:01.00:25:ba:02:de:90
Designated Bridge : 80:01.00:25:ba:02:de:90 Designated Port Id: 34817
Fwd Transitions : 1 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 2 TC bit BPDUs tx : 2
RST BPDUs rcvd : 44284 RST BPDUs tx : 3
-------------------------------------------------------------------------------
Number of SDPs : 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP 1/1/2
-------------------------------------------------------------------------------
Service Id : 10
SAP : 1/1/2 Encap : null
Description : (Not Specified)
Admin State : Up Oper State : Down
Flags : PortOperDown
Last Status Change : 07/22/2011 11:04:50
Last Mgmt Change : 07/23/2011 11:42:22
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Split Horizon Group: (Not Specified)
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
Admin MTU : 1514 Oper MTU : 1514
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
tod-suite : None
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled Mac Pinning : Disabled
BPDU Translation : Disabled
L2PT Termination : Disabled
Acct. Pol : None Collect Stats : Disabled
-------------------------------------------------------------------------------
Stp Service Access Point specifics
-------------------------------------------------------------------------------
Stp Admin State : Up Stp Oper State : Up
Core Connectivity : Down
Port Role : Disabled Port State : Discarding
Port Number : 2051 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : False
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : Rstp
Last BPDU from : N/A
CIST Desig Bridge : N/A Designated Port : 0
Forward transitions: 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
MST BPDUs rcvd : 0 MST BPDUs tx : 0
-------------------------------------------------------------------------------
ARP host
-------------------------------------------------------------------------------
Admin State : outOfService
Host Limit : 1 Min Auth Interval : 15 minutes
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1
-------------------------------------------------------------------------------
Aggregate Policer
-------------------------------------------------------------------------------
rate : n/a burst : n/a
-------------------------------------------------------------------------------
Ingress QoS Classifier Usage
-------------------------------------------------------------------------------
Classifiers Allocated: 4 Meters Allocated : 2
Classifiers Used : 2 Meters Used : 2
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Packets Octets
Ingress Stats: 0 0
Egress Stats: 0 0
Ingress Drop Stats: 0 0
Extra-Tag Drop Stats: n/a n/a
-------------------------------------------------------------------------------
Sap per Meter stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Meter 1 (Unicast)
For. InProf : 0 0
For. OutProf : 0 0
Ingress Meter 11 (Multipoint)
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
SAP 1/1/7:10
-------------------------------------------------------------------------------
Service Id : 10
SAP : 1/1/7:10 Encap : q-tag
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Last Status Change : 07/22/2011 11:06:02
Last Mgmt Change : 07/22/2011 11:04:51
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Split Horizon Group: (Not Specified)
Max Nbr of MAC Addr: No Limit Total MAC Addr : 2
Learned MAC Addr : 0 Static MAC Addr : 2
Admin MTU : 1518 Oper MTU : 1518
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
tod-suite : None
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled Mac Pinning : Disabled
BPDU Translation : Disabled
L2PT Termination : Disabled
Acct. Pol : None Collect Stats : Disabled
-------------------------------------------------------------------------------
Stp Service Access Point specifics
-------------------------------------------------------------------------------
Stp Admin State : Up Stp Oper State : Up
Core Connectivity : Down
Port Role : Designated Port State : Forwarding
Port Number : 2048 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : True
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : Rstp
Last BPDU from : N/A
CIST Desig Bridge : This Bridge Designated Port : 34816
Forward transitions: 1 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 44379
MST BPDUs rcvd : 0 MST BPDUs tx : 0
-------------------------------------------------------------------------------
ARP host
-------------------------------------------------------------------------------
Admin State : outOfService
Host Limit : 1 Min Auth Interval : 15 minutes
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1
-------------------------------------------------------------------------------
Aggregate Policer
-------------------------------------------------------------------------------
rate : n/a burst : n/a
-------------------------------------------------------------------------------
Ingress QoS Classifier Usage
-------------------------------------------------------------------------------
Classifiers Allocated: 4 Meters Allocated : 2
Classifiers Used : 2 Meters Used : 2
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Packets Octets
Ingress Stats: 0 0
Egress Stats: 1 68
Ingress Drop Stats: 0 0
Extra-Tag Drop Stats: n/a n/a
-------------------------------------------------------------------------------
Sap per Meter stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Meter 1 (Unicast)
For. InProf : 0 0
For. OutProf : 0 0
Ingress Meter 11 (Multipoint)
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
VPLS Spanning Tree Information
-------------------------------------------------------------------------------
VPLS oper state : Up Core Connectivity : Down
Stp Admin State : Up Stp Oper State : Up
Mode : Rstp Vcp Active Prot. : N/A
Bridge Id : 80:02.00:25:ba:04:37:10 Bridge Instance Id: 2
Bridge Priority : 32768 Tx Hold Count : 6
Topology Change : Inactive Bridge Hello Time : 2
Last Top. Change : 1d 00:38:51 Bridge Max Age : 20
Top. Change Count : 1 Bridge Fwd Delay : 15
Root Bridge : 80:01.00:25:ba:02:de:90
Primary Bridge : N/A
Root Path Cost : 10 Root Forward Delay: 15
Rcvd Hello Time : 2 Root Max Age : 20
Root Priority : 32769 Root Port : 2050
-------------------------------------------------------------------------------
Forwarding Database specifics
-------------------------------------------------------------------------------
Service Id : 10 Mac Move : Disabled
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Table Size : 250 Total Count : 2
Learned Count : 0 Static Count : 2
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
-------------------------------------------------------------------------------
Service Endpoints
-------------------------------------------------------------------------------
Endpoint name : e1
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : false
Block On Mesh Fail : false
Tx Active : none
Tx Active Up Time : 0d 00:00:00
Revert Time Count Down : N/A
Tx Active Change Count : 0
Last Tx Active Change : 07/22/2011 11:04:50
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
Endpoint name : e2
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : false
Block On Mesh Fail : false
Tx Active : none
Tx Active Up Time : 0d 00:00:00
Revert Time Count Down : N/A
Tx Active Change Count : 0
Last Tx Active Change : 07/22/2011 11:04:50
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
===============================================================================
Label |
Description |
|---|---|
Service Detailed Information |
|
|
The service identifier. |
|
The number which identifies the VPN. |
|
Specifies the type of service. |
|
The SDP identifier. |
|
Generic information about the service. |
|
The customer identifier. |
|
The date and time of the most recent management-initiated change to this customer. |
|
The number of SAPs specified for this service. |
|
The number of SDPs bound to this service. |
Service Destination Points (SDPs) |
|
|
The SDP identifier. |
|
Indicates whether this Service SDP binding is a spoke or a mesh. |
|
The largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
The actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
Specifies the type of delivery used by the SDP: MPLS. |
|
The administrative state of this SDP. |
|
The operational state of this SDP. |
|
The label used by the far-end device to send packets to this device in this service by this SDP. |
|
The label used by this device to send packets to the far-end device in this service by this SDP. |
|
The ID of the ingress filter policy. |
|
The ID of the egress filter policy. |
|
Specifies the IP address of the remote end of the MPLS tunnel defined by this SDP. |
|
The date and time of the most recent change to this customer. |
|
Specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. |
|
Specifies the operating status of the service. |
|
The current status of the service. |
|
Specifies how often the SDP echo request messages are transmitted on this SDP. |
|
Specifies the length of the SDP echo request messages transmitted on this SDP. |
|
Specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keepalive protocol reports a fault. |
|
Specifies the amount of time to wait before the keepalive operating status is eligible to enter the alive state. |
|
When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far-end field. |
|
The total number SDPs applied to this service ID. |
Service Access Points |
|
|
The service identifier. |
|
The ID of the access port where this SAP is defined. |
|
Generic information about the SAP. |
|
The value of the label used to identify this SAP on the access port. |
|
The desired state of the SAP. |
|
The operating state of the SAP. |
|
The date and time of the last change. |
|
The largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
The actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
The SAP ingress QoS policy ID. |
|
The SAP egress QoS policy ID. |
|
The SAP ingress filter policy ID. |
|
The SAP egress filter policy ID. |
|
Indicates the multi-service site that the SAP is a member. |
|
Indicates the ingress QoS scheduler for the SAP. |
|
Indicates the egress QoS scheduler for the SAP. |
|
Indicates the use of table-based resource classification: Enabled (table-based) or Disabled (CAM-based) |
|
Indicates the DSCP classification policy ID. |
|
Indicates the accounting policy applied to the SAP. |
|
Specifies whether accounting statistics are collected on the SAP. |
SAP Statistics |
|
|
The number of packets or octets dropped. |
|
The number of high priority packets, as determined by the SAP ingress QoS policy. |
|
The number of low priority packets, as determined by the SAP ingress QoS policy. |
|
The number of in-profile packets or octets (rate below CIR) forwarded. |
|
The number of out-of-profile packets or octets (rate above CIR) forwarded. |
Split Horizon Group Specifics |
|
|
Displays the name of the split horizon group. |
|
Displays the description of the split horizon group. |
|
Displays the Instance identifier of the split horizon group. |
|
Displays the date and time of most recent change to the split horizon group. |
|
Displays the name of the split horizon group the SAP or spoke-SDP is associated. |
arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name]
show>service>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays the ARP table for the IES instance. The ARP entries for a subscriber interface are displayed uniquely. Each MAC associated with the subscriber interface child group-interfaces are displayed with each subscriber interface ARP entry. They do not reflect actual ARP entries but are displayed along the interfaces ARP entry for easy lookup.
Displays only ARP entries in the ARP table with the specified IP address.
Displays only ARP entries in the ARP table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Displays SAP information for the specified SAP ID. See Common CLI command descriptions for command syntax.
Specifies the port ID.
Specifies matching service ARP entries associated with the IP interface.
The IP address of the interface for which to display matching ARP entries.
Specifies the IP interface name for which to display matching ARPs.
The following output is an example of ARP table information, and Table: Output Fields: ARP describes the output fields.
Sample output*A:DUT-B# show service id 100 arp
==============================================================================
ARP Table
===============================================================================
IP Address MAC Address Type Expiry Interface SAP
-------------------------------------------------------------------------------
192.168.1.2 00:00:01:00:00:01 Other 00h00m00s HW 1/1/1:10*
195.168.1.1 32:67:01:01:00:03 Other 00h00m00s to7x 1/1/3:10*
195.168.1.2 32:68:01:01:00:02 Dynamic 03h59m58s to7x 1/1/3:10*
===============================================================================
*A:DUT-B#
|
Label |
Description |
|---|---|
|
|
The IP address. |
|
|
The specified MAC address. |
|
|
|
|
|
The age of the ARP entry. |
|
|
The interface applied to the service. |
|
|
The SAP ID. |
base
show>service>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays basic information about this IES service.
The following output is an example of basic IES service information, and Table: Output Fields: Base describes the output fields.
Sample output*A:ALA-A# show service id 100 base
---------------------------------------------------------------
Service Basic Information
---------------------------------------------------------------
Service Id : 100 Vpn Id : 100
Service Type : IES
Description : Default Ies description for service id 100
Customer Id : 1
Last Status Change: 08/29/2006 17:44:28
Last Mgmt Change : 08/29/2006 17:44:28
Admin State : Up Oper State : Up
SAP Count : 2
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/3 null 1514 1514 Up Up
sap:1/1/4 null 1514 1514 Up Up
===============================================================================
*A:ALA-A#
|
Label |
Description |
|---|---|
|
Service Id |
The service identifier. |
|
VPN Id |
The VPN identifier. |
|
Service Type |
The type of service. |
|
Description |
Displays generic information about the service. |
|
Customer Id |
The customer identifier. |
|
Last Status Change |
The date and time of the most recent status change. |
|
Last Mgmt Change |
The date and time of the most recent management-initiated change to this customer. |
|
Admin State |
The administrative state of the service. |
|
Oper State |
The operational state of the service. |
|
SAP Count |
The number of SAPs defined on the service. |
|
Identifier |
Specifies the service access point (SAP). |
|
Type |
The type of SAPs allowed in the service. It also describes the applied processing by the node to the packets received on these SAPs. |
|
AdminMTU |
The largest frame size (in octets) that the SAP can handle. |
|
OprMTU |
The actual largest service frame size (in octets) that can be transmitted through this port, without requiring the packet to be fragmented. |
|
Admin |
The administrative state of the SAP. |
|
Opr |
The operating state of the SAP. |
interface [ip-address | ip-int-name] [detail]
show>service>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command displays information for the IP interfaces associated with the IES service. If no optional parameters are specified, a summary of all IP interfaces associated to the service are displayed.
Specifies the IP address of the interface for which to display information.
Specifies the IP interface name for which to display information.
Displays detailed IP interface information.
The following outputs are example of service ID interface information, and the associated tables describes the output fields.
Sample output — StandardA:ALA-49# show service id 88 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name Adm Opr(v4/v6) Type Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
Sector A Up Down/Down IES 1/1/1.2.2
- -
test Up Down/Down IES 1/1/2:0
10.1.1.1/31 n/a
10.1.1.1/31 n/a
10.1.2.1/31 n/a
test27 Up Up/-- IES Sub subscriber
192.168.10.21/24 n/a
grp-if Up Down/-- IES Grp 1/2/2
Interfaces : 4
===============================================================================
A:ALA-49#
A:ALA-49# show service id 88 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name Adm Opr(v4/v6) Type Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
Sector A Up Down/Down IES 1/1/1.2.2
- -
test Up Down/Down IES 1/1/2:0
10.1.1.1/31 n/a
10.1.1.1/31 n/a
10.1.2.1/31 n/a
test27 Up Up/-- IES Sub subscriber
192.168.10.21/24 n/a
grp-if Up Down/-- IES Grp 1/2/2
Interfaces : 4
===============================================================================
A:ALA-49#
|
Label |
Description |
|---|---|
|
|
The name used to refer to the IES interface. |
|
|
Specifies the interface type. |
|
|
Specifies the IP address/IP subnet/broadcast address of the interface. |
|
|
The administrative state of the interface. |
|
|
The operational state of the interface. |
|
|
The administrative state of the interface. |
|
|
The operational state of the interface. |
|
|
Specifies the IP address/IP subnet/broadcast address of the interface. |
|
|
The index corresponding to this IES interface. The primary index is 1; all IES interfaces are defined in the base virtual router context. |
|
|
Specifies the interface type. |
|
|
Specifies the SAP port ID. |
|
|
Specifies whether SNTP broadcast client mode is enabled or disabled. |
|
|
Specifies the timeout for an ARP entry learned on the interface. |
|
|
Specifies the 48-bit IEEE 802.3 MAC address. |
|
|
Specifies whether ICMP mask reply is enabled or disabled. |
|
|
Specifies whether cflowd collection and analysis on the interface is enabled or disabled. |
|
|
Specifies the rate for ICMP redirect messages. |
|
|
Specifies the rate for ICMP unreachable messages. |
|
|
Specifies the rate for ICMP TTL messages. |
This output is an example of IES routed VPLS interface override on the 7210 SAS-Mxp.
*A:Dut-A# show service id 2000 interface "iesRvplsIngr" detail
===============================================================================
Interface Table
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : iesRvplsIngr
Admin State : Up Oper (v4/v6) : Down/Down
Down Reason C: assocObjNotReady
Protocols : None
IP Addr/mask : 10.55.55.2/24 Address Type : Primary
IGP Inhibit : Disabled Broadcast Address: Host-ones
HoldUp-Time : 0 Track Srrp Inst : 0
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : (Not Specified)
If Index : 14 Virt. If Index : 14
Last Oper Chg: 11/07/2017 04:48:25 Global If Index : 206
Mon Oper Grp : None
Srrp En Rtng : Disabled Hold time : N/A
Port Id : rvpls
TOS Marking : Untrusted If Type : IES
SNTP B.Cast : False IES ID : 2000
MAC Address : c4:08:4a:45:c0:e4 Mac Accounting : Disabled
Ingress stats: Disabled IPv6 DAD : Enabled
ARP Timeout : 14400s IPv6 Nbr ReachTi*: 30s
ARP Retry Ti*: 5000ms IPv6 stale time : 14400s
ARP Limit : Disabled IPv6 Nbr Limit : Disabled
ARP Threshold: Disabled IPv6 Nbr Thresho*: Disabled
ARP Limit Lo*: Disabled IPv6 Nbr Log Only: Disabled
IP MTU : (default)
IP Oper MTU : 9198
LdpSyncTimer : None
LSR Load Bal*: system
EGR Load Bal*: both
Vas If Type : none
TEID Load Ba*: Disabled
SPI Load Bal*: Disabled
uRPF Chk : disabled
uRPF Ipv6 Chk: disabled
Mpls Rx Pkts : 0 Mpls Rx Bytes : 0
Mpls Tx Pkts : 0 Mpls Tx Bytes : 0
DHCP6 Relay Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Oper State : Down Nbr Resolution : Disabled
If-Id Option : None Remote Id : Disabled
Src Addr : Not configured
Python plcy : (Not Specified)
DHCP6 Server Details
Admin State : Down Max. Lease States: 8000
ICMP Details
Redirects : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
TTL Expired : Number - 100 Time (seconds) - 10
Routed VPLS Details
VPLS Name : ingRvpls
Binding Status : Up
Reason : (Not Specified)
Egr Reclass Plcy : 0
Ing Filter : none
Ingr IPv6 Flt : none
EVPN Tunnel : false
Table-based : enabled
Dscp Class Pol Id: 1
Network Domains Associated
default
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Srlg Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-A#
|
Label |
Description |
|---|---|
|
|
The name used to refer to the IES interface. |
|
|
Specifies the interface type. |
|
|
Specifies the IP address/IP subnet/broadcast address of the interface. |
|
|
The administrative state of the interface. |
|
|
The operational state of the interface. |
|
|
The administrative state of the interface. |
|
|
The operational state of the interface. |
|
|
Specifies the IP address/IP subnet/broadcast address of the interface. |
|
|
The index corresponding to this IES interface. The primary index is 1; all IES interfaces are defined in the base virtual router context. |
|
|
Specifies the interface type. |
|
|
Specifies the SAP port ID. |
|
|
Specifies whether SNTP broadcast client mode is enabled or disabled. |
|
|
Specifies the timeout for an ARP entry learned on the interface. |
|
|
Specifies the 48-bit IEEE 802.3 MAC address. |
|
|
Specifies whether ICMP mask reply is enabled or disabled. |
|
|
Specifies whether cflowd collection and analysis on the interface is enabled or disabled. |
|
|
Specifies the rate for ICMP redirect messages. |
|
|
Specifies the rate for ICMP unreachable messages. |
|
|
Specifies the rate for ICMP TTL messages. |