alias
<root>
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command shows a list of existing aliases.
The following output is an example of alias information, and Table: Output fields: alias describes the output fields.
Sample OutputA:ALA-103>config>system# show alias
==============================================================================
Alias-Name Alias-command-name
==============================================================================
sri show router interface
sse show service service-using epipe
ssvpls show service service-using vpls
ssi show service service-using ies
------------------------------------------------------------------------------
Number of aliases : 5
==============================================================================
A:ALA-103>config>system#
Label |
Description |
|---|---|
Alias-Name |
Displays the name of the alias |
Alias-command-name |
The command and parameter syntax that define the alias |
Number of aliases |
The total number of aliases configured on the router |