Show commands

Parent topic: Command descriptions

debug

Syntax

debug [application]

Context

show

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays set debug points.

Parameters

application

Displays which debug points have been set.

Values

service, ip, ospf, ospf3, mtrace, isis, mpls, rsvp, ldp, mirror, system, filter, subscriber-mgmt, radius, lag, oam

Output

The following output is an example of debug point information.

Sample output 
*A:alu1# show debug 
debug
    mirror-source 101
        port 1/1/1 ingress
        no shutdown
    exit
    mirror-source 102
        port 1/1/3 egress
        no shutdown
    exit
exit
*A:alu1#

service-using

Syntax

service-using [mirror]

Context

show>service

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays mirror services.

If no optional parameters are specified, all services defined on the system are displayed.

Parameters

mirror

Displays mirror services.

Output

The following output is an example of mirror services information, and Table: Output Fields: service-using describes the output fields.

Sample output 
A:ALA-48# show service service-using mirror
===============================================================================
Services [mirror]
===============================================================================
ServiceId    Type      Adm    Opr        CustomerId        Last Mgmt Change
-------------------------------------------------------------------------------
218          Mirror    Up     Down       1                 04/08/2007 13:49:57
318          Mirror    Down   Down       1                 04/08/2007 13:49:57
319          Mirror    Up     Down       1                 04/08/2007 13:49:57
320          Mirror    Up     Down       1                 04/08/2007 13:49:57
1000         Mirror    Down   Down       1                 04/08/2007 13:49:57
1216         Mirror    Up     Down       1                 04/08/2007 13:49:57
1412412      Mirror    Down   Down       1                 04/08/2007 13:49:57
-------------------------------------------------------------------------------
Matching Services : 7
===============================================================================
A:ALA-48#
Table: Output Fields: service-using
Label Description

Service Id

The service identifier.

Type

Specifies the service type configured for the service ID.

Adm

The desired state of the service.

Opr

The operating state of the service.

CustomerID

The ID of the customer who owns this service.

Last Mgmt Change

The date and time of the most recent management-initiated change to this service.

mirror

Syntax

mirror mirror-dest service-id

Context

show

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command displays mirror configuration and operation information.

Parameters

service-id

Specifies the mirror service ID.

Values

[1..2147483648]| svc-name:64 char max

Output

The following outputs are examples of mirroring information, and Table: Output fields: mirror describes the output fields.

Sample output 
*A:7210SAS>config>mirror>mirror-dest$ show mirror mirror-dest

===============================================================================
Mirror Services
===============================================================================
Id   Type   Adm    Opr    Destination                SDP Lbl/ 
                                                     SAP QoS          Src
                                                                      Allowed
-------------------------------------------------------------------------------
1    Ether  Down   Down   None                       n/a        0     Local
1000 Ether  Up     Down   SDP 400 (1.1.1.1)          Pending    0     Local
2000 Ether  Up     Up     SAP 1/1/17:17              1          0     Remote
===============================================================================
*A:7210SAS>config>mirror>mirror-dest$
Sample output for network mode 
*A:7210SAS>config>mirror>mirror-dest$ show mirror mirror-dest 1

===============================================================================
Mirror Service
===============================================================================
Service Id       : 1                    Type          : Ether
Description      : (Not Specified)
Admin State      : Down                 Oper State    : Down
Mirror Sources Allowed          : Local
Forwarding Class : be                   Remote Sources: No
Profile          : out

==============================================================
Mirror Services SDP
==============================================================
SdpId       IP Addr         CfgLabel    Signal    EgrLabel
--------------------------------------------------------------
No Matching Entries
==============================================================

-------------------------------------------------------------------------------
Local Sources
-------------------------------------------------------------------------------
Admin State      : Up

No Mirror Sources configured
===============================================================================
*A:7210SAS>config>mirror>mirror-dest$
Sample output for access-uplink mode 
*A:7210SAS# show mirror mirror-dest 1000

===============================================================================
Mirror Service
===============================================================================
Service Id       : 1000                 Type          : Ether
Description      : (Not Specified)
Admin State      : Up                   Oper State    : Down
Mirror Sources Allowed          : Local
Profile          : out
Destination SAP  : 1/1/1

-------------------------------------------------------------------------------
Local Sources
-------------------------------------------------------------------------------
Admin State      : Up

-Port                                   1/1/1                               Ing
===============================================================================
*A:7210SAS#
Table: Output fields: mirror
Label Description

Service Id

The service ID associated with this mirror destination.

Type

Entries in this table have an implied storage type of ‟volatile”.

The configured mirror source information is not persistent.

Admin State

Up — The mirror destination is administratively enabled.

Down — The mirror destination is administratively disabled.

Oper State

Up — The mirror destination is operationally enabled.

Down — The mirror destination is operationally disabled.

Forwarding Class

The forwarding class for all packets transmitted to the mirror destination.

Remote Sources

Yes — A remote source is configured.

No — A remote source is not configured.

Destination SAP

The ID of the access port where the Service Access Point (SAP) associated with this mirror destination service is defined.

Egr QoS Policy

This value indicates the egress QoS policy ID. A value of 0 indicates that no QoS policy is specified.

mirror sources allowed

This value tells the user the type of mirror sources allowed to be configured.