download-failed
show>filter
Supported on all 7210 SAS platforms as described in this document
This command displays all filter entries for which the download has failed.
The following output is an example of failed download information, and Table: Output fields: filter download-failed describes the output fields.
Sample outputA:ALA-48# show filter download-failed
============================================
Filter entries for which download failed
============================================
Filter-type Filter-Id Filter-Entry
--------------------------------------------
ip 1 10
============================================
A:ALA-48#
| Label | Description |
|---|---|
|
Filter-type |
Displays the filter type |
|
Filter-ID |
Displays the ID of the filter |
|
Filter-Entry |
Displays the entry number of the filter |
ip ip-filter-id [association | counters]
ip ip-filter-id entry entry-id [counters]
show>filter
Supported on all 7210 SAS platforms as described in this document
This command displays IP filter information.
Displays detailed information for the specified filter ID and its filter entries.
Displays information about the specified filter entry ID for the specified filter ID only.
Displays information about where the filter policy ID is applied to the detailed filter policy ID output.
Displays counter information for the specified filter ID. Egress counters count the packets without Layer 2 encapsulation. Ingress counters count the packets with Layer 2 encapsulation.
Displays information about the specified filter ID for the specified entry-type only
The following outputs are examples of IP filter information, and the associated tables describe the output fields.
IP Filter: Sample Output , Table: Output fields: filter IP
IP Filter with Filter ID Specified: Sample Output , Table: Output fields: filter with filter ID specified
IP Filter with Time-range Specified: Sample Output
IP Filter Associations: Sample Output , Table: Output fields: filter IP associations
IP Filter Counters: Table: Output fields: filter counters
A:ALA-49# show filter ip
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
1 Template Yes
3 Template Yes
6 Template Yes
10 Template No
11 Template No
-------------------------------------------------------------------------------
Num IP filters: 5
===============================================================================
A:ALA-49#
*A:Dut-C>config>filter# show filter ip
===============================================================================
IP Filters Total: 2
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
10001 Template Yes
fSpec-1 Template Yes BGP FlowSpec filter for the Base router
-------------------------------------------------------------------------------
Num IP filters: 2
===============================================================================
*A:Dut-C>config>filter#
| Label | Description |
|---|---|
Filter Id |
The IP filter ID. |
Scope |
Template The filter policy is of type template. Exclusive The filter policy is of type exclusive. |
Applied |
No The filter policy ID has not been applied. Yes The filter policy ID has been applied. |
Description |
The IP filter policy description. |
A:ALA-49>config>filter# show filter ip 3
===============================================================================
IP Filter
===============================================================================
Filter Id : 3 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Match Criteria : IP
-------------------------------------------------------------------------------
Entry : 10
Src. IP : 10.1.1.1/24 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 2 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
A:ALA-49>config>filter#
*A:Dut-C>config>filter# show filter ip fSpec-1 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : fSpec-1 Applied : Yes
Scope : Template Def. Action : Forward
Radius Ins Pt: n/a
CrCtl. Ins Pt: n/a
Entries : 2 (insert By Bgp)
Description : BGP FlowSpec filter for the Base router
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Service Id : 1 Type : IES
- SAP 1/1/3:1.1 (merged in ip-fltr 10001)
===============================================================================
*A:Dut-C>config>filter#
*A:Dut-C>config>filter# show filter ip 10001
===============================================================================
IP Filter
===============================================================================
Filter Id : 10001 Applied : Yes
Scope : Template Def. Action : Drop
Radius Ins Pt: n/a
CrCtl. Ins Pt: n/a
Entries : 1
BGP Entries : 2
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Match Criteria : IP
-------------------------------------------------------------------------------
Entry : 1
Description : (Not Specified)
Log Id : n/a
Src. IP : 0.0.0.0/0 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 6 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
Sampling : Off Int. Sampling : On
IP-Option : 0/0 Multiple Option: Off
TCP-syn : Off TCP-ack : Off
Match action : Forward
Next Hop : Not Specified
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Entry : fSpec-1-32767 - inserted by BGP FLowSpec
Description : (Not Specified)
Log Id : n/a
Src. IP : 0.0.0.0/0 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 6 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
Sampling : Off Int. Sampling : On
IP-Option : 0/0 Multiple Option: Off
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Entry : fSpec-1-49151 - inserted by BGP FLowSpec
Description : (Not Specified)
Log Id : n/a
Src. IP : 0.0.0.0/0 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 17 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
Sampling : Off Int. Sampling : On
IP-Option : 0/0 Multiple Option: Off
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
===============================================================================
*A:Dut-C>config>filter#
| Label | Description |
|---|---|
Filter Id |
The IP filter policy ID. |
Scope |
Template — The filter policy is of type template. |
Exclusive — The filter policy is of type exclusive. |
|
Entries |
The number of entries configured in this filter ID. |
Description |
The IP filter policy description. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Filter Match Criteria |
IP — Indicates the filter is an IP filter policy. |
Entry |
The filter ID filter entry ID. If the filter entry ID indicates the entry is (Inactive), then the filter entry is incomplete as no action has been specified. |
ICMP Type |
The ICMP type match criterion. Undefined indicates no ICMP type specified. |
Fragment |
False — Configures a match on all non-fragmented IP packets. |
True — Configures a match on all fragmented IP packets. |
|
Off — Fragments are not a matching criteria. All fragments and non-fragments implicitly match. |
|
TCP-syn |
False — Configures a match on packets with the SYN flag set to false. |
True — Configured a match on packets with the SYN flag set to true. |
|
Off — The state of the TCP SYN flag is not considered as part of the match criteria. |
|
Match action |
Default — The filter does not have an explicit forward or drop match action specified. If the filter entry ID indicates the entry is Inactive, the filter entry is incomplete, no action was specified. |
Drop — Drop packets matching the filter entry. |
|
Forward — The explicit action to perform is forwarding of the packet. |
|
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. |
Src. Port |
The source TCP or UDP port number. |
Dest. Port |
The destination TCP or UDP port number. |
Dscp |
The DiffServ Code Point (DSCP) name. |
ICMP Code |
The ICMP code field in the ICMP header of an IP packet. |
Option-present |
Off — Specifies not to search for packets that contain the option field or have an option field of zero. |
On — Matches packets that contain the option field or have an option field of zero be used as IP filter match criteria. |
|
TCP-ack |
False — Configures a match on packets with the ACK flag set to false. |
True — Configures a match on packets with the ACK flag set to true. |
|
Off — The state of the TCP ACK flag is not considered as part of the match criteria. as part of the match criteria. |
|
Egr. Matches |
The number of egress filter matches or hits for the filter entry. |
A:ALA-49# show filter ip 10
===============================================================================
IP Filter
===============================================================================
Filter Id : 10 Applied : No
Scope : Template Def. Action : Drop
Entries : 2
-------------------------------------------------------------------------------
Filter Match Criteria : IP
-------------------------------------------------------------------------------
Entry : 1010
time-range : day Cur. Status : Inactive
Src. IP : 0.0.0.0/0 Src. Port : None
Dest. IP : 10.10.100.1/24 Dest. Port : None
Protocol : Undefined Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
TCP-syn : Off TCP-ack : Off
Match action : Forward
Ing. Matches : 0 Egr. Matches : 0
Entry : 1020
time-range : night Cur. Status : Active
Src. IP : 0.0.0.0/0 Src. Port : None
Dest. IP : 10.10.1.1/16 Dest. Port : None
Protocol : Undefined Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
TCP-syn : Off TCP-ack : Off
Match action : Forward
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
A:ALA-49#
A:ALA-49# show filter ip 1 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Service Id : 1001 Type : VPLS
- SAP 1/1/1:1001 (Ingress)
Service Id : 2000 Type : Epipe
- SAP 1/1/1:2000 (Ingress)
===============================================================================
A:ALA-49#
A:ALA-49# show filter ip 160 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : 160 Applied : No
Scope : Template Def. Action : Drop
Entries : 0
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Tod-suite "english_suite"
- ingress, time-range "day" (priority 5)
===============================================================================
A:ALA-49#
| Label | Description |
|---|---|
Filter Id |
The IP filter policy ID. |
Scope |
Template — The filter policy is of type Template. |
Exclusive — The filter policy is of type Exclusive. |
|
Entries |
The number of entries configured in this filter ID. |
Applied |
Yes — The filter policy ID has been applied. |
No — The filter policy ID has not been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
Service Id |
The service ID on which the filter policy ID is applied. |
SAP |
The Service Access Point on which the filter policy ID is applied. |
(Ingress) |
The filter policy ID is applied as an ingress filter policy on the interface. |
(Egress) |
The filter policy ID is applied as an egress filter policy on the interface. |
Type |
The type of service of the service ID. |
| Label | Description |
|---|---|
IP Filter Filter Id |
The IP filter policy ID. |
Scope |
Template — The filter policy is of type Template. |
Exclusive — The filter policy is of type Exclusive. |
|
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Filter Match Criteria |
IP — Indicates the filter is an IP filter policy. |
Entry |
The filter ID filter entry ID. If the filter entry ID indicates the entry is Inactive, then the filter entry is incomplete as no action has been specified. |
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. Ingress counters count the packets with Layer 2 encapsulation. |
Egr. Matches |
The number of egress filter matches or hits for the filter entry. Egress counters count the packets without Layer 2 encapsulation. |
ipv6 {ipv6-filter-id [entry entry-id] [association | counters]}
show>filter
Supported on all 7210 SAS platforms as described in this document
This command displays IPv6 filter information.
Displays detailed information for the specified IPv6 filter ID and filter entries.
Displays information about the specified IPv6 filter entry ID for the specified filter ID.
Displays information about where the IPv6 filter policy ID is applied to the detailed filter policy ID output.
Displays counter information for the specified IPv6 filter ID.
Egress counters count the packets without Layer 2 encapsulation. Ingress counters count the packets with Layer 2 encapsulation.
The following outputs are examples of IP filter information, and the associated tables describe the output fields.
Sample Output, Table: Output fields: IP filter (no filter-id specified)
Sample Output for IPv6 Filter with Filter ID Specified, Table: Output fields: filter (with filter-id specified)
Sample Output for IPv6 Filter Associations, Table: Output fields: filter associations
Sample Output for IPv6 Filter Counters, Table: Output fields: filter counters
*A:7210SAS>show>filter# ipv6
===============================================================================
IPv6 Filters Total: 1
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
1 Template Yes
-------------------------------------------------------------------------------
Num IPv6 filters: 1
===============================================================================
*A:7210SAS>show>filter#
| Label | Description |
|---|---|
Filter Id |
The IP filter ID. |
Scope Template |
The filter policy is of type template. |
Exclusive |
The filter policy is of type exclusive. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Description |
The IP filter policy description. |
*A:7210SAS>show>filter# ipv6 1
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 2
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Match Criteria : IPv6
-------------------------------------------------------------------------------
Entry : 1
Description : Test
Src. IP : 2001:db8::1/128 Src. Port : None
Dest. IP : 2001:db8::/0 Dest. Port : None
Next Header : Undefined Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
TCP-syn : Off TCP-ack : Off
Match action : Forward
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Entry : 2
Description : (Not Specified)
Src. IP : ::/0 Src. Port : None
Dest. IP : 1:2::1AFC/128 Dest. Port : None
Next Header : Undefined Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 819 pkts
Egr. Matches : 0 pkts
===============================================================================
*A:7210SAS>show>filter#
| Label | Description |
|---|---|
Filter Id |
The IP filter policy ID. |
Scope |
Template — The filter policy is of type template. |
Exclusive — The filter policy is of type exclusive. |
|
Entries |
The number of entries configured in this filter ID. |
Description |
The IP filter policy description. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Filter Match Criteria |
IP — Indicates the filter is an IP filter policy. |
Entry |
The filter ID filter entry ID. If the filter entry ID indicates the entry is (Inactive), then the filter entry is incomplete as no action has been specified. |
Src. IP |
The source IP address and mask match criterion. 0.0.0.0/0 indicates no criterion specified for the filter entry. |
Dest. IP |
The destination IP address and mask match criterion. 0.0.0.0/0 indicates no criterion specified for the filter entry. |
ICMP Type |
The ICMP type match criterion. Undefined indicates no ICMP type specified. |
IP-Option |
Specifies matching packets with a specific IP option or a range of IP options in the IP header for IP filter match criteria. |
TCP-syn |
False — Configures a match on packets with the SYN flag set to false. |
True — Configured a match on packets with the SYN flag set to true. |
|
Off — The state of the TCP SYN flag is not considered as part of the match criteria. |
|
Match action |
Default — The filter does not have an explicit forward or drop match action specified. If the filter entry ID indicates the entry is (Inactive), then the filter entry is incomplete as no action has been specified. |
Drop — Drop packets matching the filter entry. |
|
Forward — The explicit action to perform is forwarding of the packet. If the action is Forward, then, if configured, the next-hop information should be displayed, including Nexthop: <IP address>, Indirect: <IP address> or Interface: <IP interface name>. |
|
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. |
Src. Port |
The source TCP or UDP port number or port range. |
Dest. Port |
The destination TCP or UDP port number or port range. |
Dscp |
The DiffServ Code Point (DSCP) name. |
ICMP Code |
The ICMP code field in the ICMP header of an IP packet. |
TCP-ack |
False — Configures a match on packets with the ACK flag set to false. |
True — Configured a match on packets with the ACK flag set to true. |
|
Off — The state of the TCP ACK flag is not considered as part of the match criteria |
|
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. |
Egr. Matches |
The number of egress filter matches or hits for the filter entry. |
*A:7210SAS>show>filter# ipv6 1 associations
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 2
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Association : IPv6
-------------------------------------------------------------------------------
Service Id : 1 Type : Epipe
- SAP 1/1/1:1 (Ingress)
Service Id : 2 Type : VPLS
- SAP 1/1/1:2 (Ingress)
- SAP 1/1/1:3 (Ingress)
===============================================================================
*A:7210SAS>show>filter#
| Label | Description |
|---|---|
Filter Id |
The IPv6 filter policy ID. |
Scope |
Template — The filter policy is of type Template. |
Exclusive — The filter policy is of type Exclusive. |
|
Entries |
The number of entries configured in this filter ID. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Description |
The IP filter policy description. |
Service Id |
The service ID on which the filter policy ID has been applied. |
SAP |
The Service Access Point on which the filter policy ID is applied. |
Ingress — The filter policy ID is applied as an ingress filter policy on the interface. |
|
Egress — The filter policy ID is applied as an egress filter policy on the interface. |
|
Type |
The type of service of the service ID. |
*A:7210SAS>show>filter# ipv6 1 counters
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 2
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Match Criteria : IPv6
-------------------------------------------------------------------------------
Entry : 1
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Entry : 2
Ing. Matches : 819 pkts
Egr. Matches : 0 pkts
===============================================================================
*A:7210SAS>show>filter#
| Label | Description |
|---|---|
Filter Id |
The IPv6 filter policy ID. |
Scope |
Template — The filter policy is of type Template. |
Exclusive — The filter policy is of type Exclusive. |
|
Entries |
The number of entries configured in this filter ID. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Description |
The IP filter policy description. |
Entry |
The filter ID filter entry ID. If the filter entry ID indicates the entry is (Inactive), then the filter entry is incomplete as no action has been specified. |
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. |
Egr. Matches |
The number of egress filter matches or hits for the filter entry. Egress counters count the packets without Layer 2 encapsulation. Ingress counters count the packets with Layer 2 encapsulation. |
mac [mac-filter-id [associations | counters] [entry entry-id]]
show>filter
Supported on all 7210 SAS platforms as described in this document
This command displays MAC filter information.
Displays detailed information for the specified filter ID and its filter entries.
Displays information about where the filter policy ID is applied to the detailed filter policy ID output.
Displays counter information for the specified filter ID.
Displays information about the specified filter entry ID for the specified filter ID only.
The following outputs are examples of MAC filter information, and the associated tables describe the output fields.
Sample Output, Sample Detailed Output, Table: Output fields: filter MAC
Sample Output for MAC Filter Associations, Table: Output fields: filter MAC associations
Sample Output for MAC Filter Counters, Table: Output fields: filter MAC counters
===============================================================================
Mac Filter
===============================================================================
Filter Id : 8 Applied : Yes
Scope : Template Def. Action : Forward
Entries : 2
Description : Description for Mac Filter Policy id # 8
-------------------------------------------------------------------------------
Filter Match Criteria : Mac
-------------------------------------------------------------------------------
Entry : 8 FrameType : Ethernet
Ing. Matches: 80 pkts
Egr. Matches: 62 pkts
Entry : 10 FrameType : Ethernet
Ing. Matches: 80 pkts
Egr. Matches: 80 pkts
===============================================================================
Mac Filter : 200
===============================================================================
Filter Id : 200 Applied : No
Scope : Exclusive D. Action : Drop
Description : Forward SERVER sourced packets
-------------------------------------------------------------------------------
Filter Match Criteria : Mac
-------------------------------------------------------------------------------
Entry : 200 FrameType : 802.2SNAP
Description : Not Available
Src Mac : 00:00:5a:00:00:00 ff:ff:ff:00:00:00
Dest Mac : 00:00:00:00:00:00 00:00:00:00:00:00
Dot1p : Undefined Ethertype : 802.2SNAP
Match action : Forward
Ing. Matches : 0 Egr. Matches : 0
Entry : 300 (Inactive) FrameType : Ethernet
Description : Not Available
Src Mac : 00:00:00:00:00:00 00:00:00:00:00:00
Dest Mac : 00:00:00:00:00:00 00:00:00:00:00:00
Dot1p : Undefined Ethertype : Ethernet
Match action : Default
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
| Label | Description |
|---|---|
MAC Filter Filter Id |
The MAC filter policy ID. |
Scope |
Template — The filter policy is of type Template. |
Exclusive — The filter policy is of type Exclusive. |
|
Description |
The IP filter policy description. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Filter Match Criteria |
MAC — Indicates that the filter is an MAC filter policy. |
Entry |
The filter ID filter entry ID. If the filter entry ID indicates the entry is (Inactive), then the filter entry is incomplete as no action has been specified. |
Description |
The filter entry description. |
FrameType |
Ethernet — The entry ID match frame type is Ethernet IEEE 802.3. |
Ethernet II — The entry ID match frame type is Ethernet Type II |
|
Src MAC |
The source MAC address and mask match criterion. When both the MAC address and mask are all zeros, no criterion specified for the filter entry. |
Dest MAC |
The destination MAC address and mask match criterion. When both the MAC address and mask are all zeros, no criterion specified for the filter entry. |
Dot1p |
The IEEE 802.1p value for the match criteria. Undefined indicates no value is specified. |
Ethertype |
The Ethertype value match criterion. |
Match action |
Default — The filter does not have an explicit forward or drop match action specified. If the filter entry ID indicates the entry is Inactive, the filter entry is incomplete, no action was specified. |
Drop — Packets matching the filter entry criteria are dropped. |
|
Forward — Packets matching the filter entry criteria are forwarded. |
|
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. |
Egr. Matches |
The number of egress filter matches or hits for the filter entry. |
A:ALA-49# show filter mac 3 associations
===============================================================================
Mac Filter
===============================================================================
Filter ID : 3 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Association : Mac
-------------------------------------------------------------------------------
Service Id : 1001 Type : VPLS
- SAP 1/1/1:1001 (Egress)
===============================================================================
A:ALA-49#
| Label | Description |
|---|---|
Filter Association |
Mac — The filter associations displayed are for a MAC filter policy ID. |
Service Id |
The service ID on which the filter policy ID is applied. |
SAP |
The Service Access Point on which the filter policy ID is applied. |
Type |
The type of service of the Service ID. |
(Ingress) |
The filter policy ID is applied as an ingress filter policy on the interface. |
(Egress) |
The filter policy ID is applied as an egress filter policy on the interface. |
A:ALA-49# show filter mac 8 counters
| Label | Description |
|---|---|
Mac Filter Filter Id |
The MAC filter policy ID. |
Scope |
Template — The filter policy is of type Template. |
Exclusive — The filter policy is of type Exclusive. |
|
Description |
The MAC filter policy description. |
Applied |
No — The filter policy ID has not been applied. |
Yes — The filter policy ID has been applied. |
|
Def. Action |
Forward — The default action for the filter ID for packets that do not match the filter entries is to forward. |
Drop — The default action for the filter ID for packets that do not match the filter entries is to drop. |
|
Filter Match Criteria |
Mac — Indicates that the filter is an MAC filter policy. |
Entry |
The filter ID filter entry ID. If the filter entry ID indicates the entry is (Inactive), then the filter entry is incomplete as no action has been specified. |
FrameType |
Ethernet II — The entry ID match frame type is Ethernet Type II. |
Ing. Matches |
The number of ingress filter matches or hits for the filter entry. |
Egr. Matches |
The number of egress filter matches or hits for the filter entry. |