Show commands

Context

show>system

Platforms

Supported on all 7210 SAS platforms as described in this document, including those configured in the access-uplink operating mode

Description

This command displays facility alarms on the system.

Parameters

cleared

Displays the cleared alarm queue.

severity-level

Specifies the severity level of the alarm.

Values

critical | major | minor | warning

days

Displays alarms that are newer than the number of days specified.

Values

1 to 365

Output

The following output is an example of facility alarm information, and Table: Output fields: alarms describes the output fields.

Sample output

*A:7210SAS# show system alarms 

===============================================================================
Alarms [Critical:1 Major:2 Minor:0 Warning:0 Total:3]
===============================================================================
Index      Date/Time               Severity     Alarm         Resource
   Details
-------------------------------------------------------------------------------
13 2014/11/13 14:34:39.20 MAJOR 7-2005-1 Chassis 1
   Chassis: Temperature too high

12 2014/11/13 14:34:13.70 MAJOR 7-3002-1 Alarm Input Module 2
   Alarm Input "Pin 2" ("2") has changed status to "alarm" 
"Alarm Input
   Triggered"

11 2014/11/13 14:32:37.00 CRITICAL 7-3001-1 Alarm Input Module 1
   Alarm Input "Pin 1" ("1") has changed status to "alarm" 
"Alarm Input
   Triggered"
===============================================================================
*A:7210SAS# 

Cleared alarms table:

A:Dut-A# show system alarms cleared

===============================================================================
Cleared Alarms [Size:500 Total:5 (not wrapped)]
===============================================================================
Index      Date/Time               Severity     Alarm         Resource
   Details
-------------------------------------------------------------------------------
5          2011/04/01 18:11:55.00  MAJOR        7-2005-1      Chassis 1
   Clear Chassis temperature too high alarm

3          2011/04/01 18:11:54.50  CRITICAL     7-2051-1      Power Supply 1
   Clear Power Supply failure

2          2011/04/01 18:11:54.40  CRITICAL     7-2050-1      Power Supply 1
   Clear Power Supply failure

4          2011/04/01 18:11:54.10  MINOR        7-2004-1      Fan 1
   Clear Fan wrong type failure

1          2011/04/01 18:11:54.00  CRITICAL     7-2007-1      Power Supply 1
   Clear Power Supply failure
===============================================================================