eth-cfm
show
Supported on all 7210 SAS platforms as described in this document
This command displays ETH-CFM information.
eth-tunnel
show
Supported on all 7210 SAS platforms as described in this document
This command displays Ethernet tunnel information. Any data SAP missing a tag for a defined path has the EthTunTagMismatch flag generated. In the following example, SAP eth-tunnel-1:1 does not have the tag for path 2 configured. Therefore, it is operationally down with the reason indicated by the EthTunTagMismatch flag.
association [ma-index] [detail]
show>eth-cfm
Supported on all 7210 SAS platforms as described in this document
This command displays eth-cfm association information.
Specifies the maintenance association (MA) index.
Displays more information for the ETH-CFM association.
The following output is an example of Ethernet CFM association information, and Table: Output fields: ETH CFM association describes the output fields.
Sample outputA:dut-b# show eth-cfm association
======================================================================
CFM Association Table
======================================================================
Md-index Ma-index Name CCM-interval Bridge-id
----------------------------------------------------------------------
1 1 a1 1 1
1 2 a2 1 2
2 1 a1 1 2
2 2 a2 1 1
======================================================================
A:dut-b#
Label | Description |
---|---|
Md-index |
Displays the maintenance domain (MD) index. |
Ma-index |
Displays the maintenance association (MA) index. |
Name |
Displays the part of the maintenance association identifier which is unique within the maintenance domain name. |
CCM-interval |
Displays the CCM transmission interval for all MEPs in the association. |
Bridge-id |
Displays the bridge-identifier value for the domain association. |
MHF Creation |
Displays the MIP half function (MHF) for the association. |
Primary VLAN |
Displays the primary bridge-identifier VLAN ID. |
Num Vids |
Displays the number of VIDs associated with the VLAN. |
Remote Mep Id |
Displays the remote maintenance association endpoint (MEP) identifier. |
cfm-stack-table [{all-ports}] [level <0..7>] [direction <down>]
cfm-stack-table port <port-id> [vlan <qtag[.qtag]>] [level <0..7>] [direction <down>]
cfm-stack-table facility [{all-ports | all-lags | all-lag-ports | all-tunnel-meps | all-router-interfaces}] [level <0..7>] [direction <down>]
cfm-stack-table facility lag <id> [tunnel <1..4094>] [level <0..7>] [direction <down>]
cfm-stack-table facility port <id> [level <0..7>] [direction <down>]
cfm-stack-table facility router-interface <ip-int-name> [level <0..7>] [direction <down>]
show>eth-cfm
Supported on all 7210 SAS platforms as described in this document
This command displays stack-table information. This stack-table is used to display the various management points MEPs and MIPs that are configured on the system. This can be service based. The options allow the user to display specific information. If no parameters are included, the entire stack-table is displayed.
Displays the bridge port or aggregated port on which MEPs or MHFs are configured.
Displays the associated VLAN ID.
Displays the MD level of the maintenance point.
Displays the direction in which the MP faces on the bridge port.
The following output is an example of Ethernet CFM stack table information, and Table: Output fields: ETH-CFM CFM stack table describes the output fields.
Sample output
*A:7210SAS>show>eth-cfm# cfm-stack-table
========================================================================
CFM SAP Stack Table
========================================================================
Sap Level Dir Md-index Ma-index Mep-id Mac-address
------------------------------------------------------------------------
1/1/18:100 7 Up 7 100 1 00:25:ba:0d:21:13
========================================================================
========================================================================
CFM Ethernet Tunnel Stack Table
========================================================================
Eth-tunnel Level Dir Md-index Ma-index Mep-id Mac-address
------------------------------------------------------------------------
No Matching Entries
========================================================================
========================================================================
CFM SDP Stack Table
========================================================================
Sdp Level Dir Md-index Ma-index Mep-id Mac-address
------------------------------------------------------------------------
No Matching Entries
========================================================================
========================================================================
CFM Virtual Stack Table
========================================================================
Service Level Dir Md-index Ma-index Mep-id Mac-address
------------------------------------------------------------------------
No Matching Entries
========================================================================
*A:7210SAS>show>eth-cfm#
Sample for 7210 SAS-R6 and 7210 SAS-R12 IMMv2:
*A:7210SAS>show>eth-cfm# cfm-stack-table
===============================================================================
CFM SAP Primary VLAN Stack Table
===============================================================================
Sap
Primary VlanId Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
lag-2:1
200 7 Both 10 1 MIP 00:11:11:11:11:11 ------
lag-2:2
200 7 Both 10 2 MIP 00:11:11:11:11:12 ------
lag-2:3
*A:7210SAS>show>
Label | Description |
---|---|
Sap |
Displays associated SAP IDs |
Sdp |
Displays the SDP binding for the bridge |
Level Dir |
Displays the MD level of the maintenance point |
Md-index |
Displays the maintenance domain (MD) index |
Ma-index |
Displays the maintenance association (MA) index |
Mep-id |
Displays the integer that is unique among all the MEPs in the same MA |
Mac-address |
Displays the MAC address of the MP |
domain [md-index] [association ma-index | all-associations] [detail]
show>eth-cfm
Supported on all 7210 SAS platforms as described in this document
This command displays domain information.
Displays the index of the MD to which the MP is associated, or 0, if none.
Displays the index to which the MP is associated, or 0, if none.
Displays all associations to the MD.
Displays detailed domain information.
The following output is an example of Ethernet CFM domain information, and Table: Output fields: ETH-CFM domain describes the output fields.
Sample outputA:dut-b# show eth-cfm domain
==============================================================================
CFM Domain Table
==============================================================================
Md-index Level Name Format
------------------------------------------------------------------------------
1 6 d1 charString
2 7 d2 charString
==============================================================================
A:dut-b#
Label | Description |
---|---|
Md-index |
Displays the Maintenance Domain (MD) index value |
Level |
Displays an integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links. |
Name |
Displays a generic Maintenance Domain (MD) name |
Format |
Displays the type of the Maintenance Domain (MD) name. Values include dns, mac, and string. |
mep mep-id domain md-index association ma-index [loopback] [linktrace]
mep mep-id domain md-index association ma-index remote-mepid mep-id | all-remote-mepids
mep mep-id domain md-index association ma-index eth-test-results [remote-peer mac-address]
mep mep-id domain md-index association ma-index one-way-delay-test [remote-peer mac-address]
mepmep-id domain md-index association ma-index two-way-delay-test [remote-peer mac-address]
mep mep-id domain md-index association ma-index two-way-slm-test [remote-peer macaddress]
show>eth-cfm
Supported on all 7210 SAS platforms as described in this document
This command displays Maintenance Endpoint (MEP) information.
The show eth-cfm mep mep-id domain md-id association ma-id command does not display CCM ERROR, CCM XCON frames in the output.
The show eth-cfm mep mep-id domain md-id association ma-id remote-mep rmep-id command does not display some TLVs details.
Displays the integer that is unique among all the MEPs in the same MA.
Displays the index of the MD to which the MP is associated, or 0, if none.
Displays the index to which the MP is associated, or 0, if none.
Displays loopback information for the specified MEP.
Displays linktrace information for the specified MEP.
Includes specified remote mep-id information for specified the MEP.
Includes all remote mep-id information for the specified MEP.
Includes eth-test-result information for the specified MEP.
Includes one-way-delay-test information for the specified MEP.
Includes two-way-delay-test information for the specified MEP.
Includes two-way-slm-test information for the specified MEP.
Includes specified remote mep-id information for the specified MEP.
The following outputs are examples of MEP information, and Table: Output fields: MEP describes the output fields.
Sample outputA:dut-b# show eth-cfm mep 1 domain 1 association 1 linktrace
-------------------------------------------------------------------------------
Mep Information
-------------------------------------------------------------------------------
Md-index : 1 Direction : Down
Ma-index : 1 Admin : Enabled
MepId : 1 CCM-Enable : Enabled
IfIndex : 35946496 PrimaryVid : 1
FngState : fngReset ControlMep : False
LowestDefectPri : macRemErrXcon HighestDefect : none
Defect Flags : None
Mac Address : 00:25:ba:01:c3:6a CcmLtmPriority : 7
CcmTx : 0 CcmSequenceErr : 0
Eth-1Dm Threshold : 3(sec)
Eth-Ais: : Disabled
Eth-Tst: : Disabled
CcmLastFailure Frame:
None
XconCcmFailure Frame:
None
-------------------------------------------------------------------------------
Mep Linktrace Message Information
-------------------------------------------------------------------------------
LtRxUnexplained : 0 LtNextSequence : 2
LtStatus : False LtResult : False
TargIsMepId : False TargMepId : 0
TargMac : 00:00:00:00:00:00 TTL : 64
EgressId : 00:00:00:25:ba:01:c3:6a SequenceNum : 1
LtFlags : useFDBonly
-------------------------------------------------------------------------------
Mep Linktrace Replies
-------------------------------------------------------------------------------
SequenceNum : 1 ReceiveOrder : 1
Ttl : 63 Forwarded : False
LastEgressId : 00:00:00:25:ba:01:c3:6a TerminalMep : True
NextEgressId : 00:00:00:25:ba:00:5e:bf Relay : rlyHit
ChassisIdSubType : unknown value (0)
ChassisId:
None
ManAddressDomain:
None
ManAddress:
None
IngressMac : 00:25:ba:00:5e:bf Ingress Action : ingOk
IngrPortIdSubType : unknown value (0)
IngressPortId:
None
EgressMac : 00:00:00:00:00:00 Egress Action : egrNoTlv
EgrPortIdSubType : unknown value (0)
EgressPortId:
None
Org Specific TLV:
None
A:dut-b#
A:dut-b#
A:dut-b# show eth-cfm mep 1 domain 1 association 1 loopback
-------------------------------------------------------------------------------
Mep Information
-------------------------------------------------------------------------------
Md-index : 1 Direction : Down
Ma-index : 1 Admin : Enabled
MepId : 1 CCM-Enable : Enabled
IfIndex : 35946496 PrimaryVid : 1
FngState : fngReset ControlMep : False
LowestDefectPri : macRemErrXcon HighestDefect : none
Defect Flags : None
Mac Address : 00:25:ba:01:c3:6a CcmLtmPriority : 7
CcmTx : 0 CcmSequenceErr : 0
Eth-1Dm Threshold : 3(sec)
Eth-Ais: : Disabled
Eth-Tst: : Disabled
CcmLastFailure Frame:
None
XconCcmFailure Frame:
None
-------------------------------------------------------------------------------
Mep Loopback Information
-------------------------------------------------------------------------------
LbRxReply : 1 LbRxBadOrder : 0
LbRxBadMsdu : 0 LbTxReply : 0
LbSequence : 2 LbNextSequence : 2
LbStatus : False LbResultOk : True
DestIsMepId : False DestMepId : 0
DestMac : 00:00:00:00:00:00 SendCount : 0
VlanDropEnable : True VlanPriority : 7
Data TLV:
None
A:dut-b#
*A:dut-b# show eth-cfm mep 1 domain 4 association 4 two-way-delay-test remote-
peer 00:25:ba:00:5e:bf
==================================================================
Eth CFM Two-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:25:ba:00:5e:bf 507 507
==================================================================
*A:dut-b#
*A:dut-b# show eth-cfm mep 1 domain 4 association 4 two-way-delay-test
==================================================================
Eth CFM Two-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:25:ba:00:5e:bf 507 507
==================================================================
*A:dut-b#
*A:dut-a# show eth-cfm mep 2 domain 4 association 4 eth-test-results remote-
peer 00:25:ba:01:c3:6a
==============================================================
Eth CFM ETH-Test Result Table
==============================================================
Current Accumulate
FrameCount ErrBits ErrBits
Peer Mac Addr ByteCount CrcErrs CrcErrs
--------------------------------------------------------------
00:25:ba:01:c3:6a 6 0 0
384 0 0
==============================================================
*A:dut-a#
*A:dut-a# show eth-cfm mep 2 domain 4 association 4 eth-test-results
==============================================================
Eth CFM ETH-Test Result Table
==============================================================
Current Accumulate
FrameCount ErrBits ErrBits
Peer Mac Addr ByteCount CrcErrs CrcErrs
--------------------------------------------------------------
00:25:ba:01:c3:6a 6 0 0
384 0 0
==============================================================
*A:dut-a# show eth-cfm mep 2 domain 4 association 4 one-way-delay-test remote-
peer 00:25:ba:01:c3:6a
==================================================================
Eth CFM One-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:25:ba:01:c3:6a 402 402
==================================================================
*A:dut-a#
*A:dut-a# show eth-cfm mep 2 domain 4 association 4 one-way-delay-test
==================================================================
Eth CFM One-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:25:ba:01:c3:6a 402 402
==================================================================
*A:dut-a#
Sample output for two-way-slm-test
*A:7210SAS# show eth-cfm mep 1 domain 7 association 100 two-way-slm-test
===============================================================================
Eth CFM Two-way SLM Test Result Table (Test-id: 1)
===============================================================================
Peer Mac Addr Remote MEP Count In Loss Out Loss Unack
-------------------------------------------------------------------------------
00:25:ba:0d:1e:12 2 1 0 0 0
===============================================================================
*A:7210SAS#
Label | Description |
---|---|
Mep Information |
|
Md-index |
Displays the MD index of the domain. |
Direction |
Displays the direction of OAMPDU transmission. |
Ma-index |
Displays the MA index of the association. |
Admin |
Displays the administrative status of the MEP. |
MepId |
Displays the MEP identifier. |
CCM-Enable |
Displays the status of the CCM (enabled or disabled). |
IfIndex |
Displays the index of the interface. |
PrimaryVid |
Displays the identifier of the primary VLAN. |
FngState |
Indicates the different states of the Fault Notification Generator. |
LowestDefectPri |
Displays the lowest priority defect (a configured value) that is allowed to generate a fault alarm. |
HighestDefect |
Identifies the highest defect that is present (for example, if defRDICCM and defXconCCM are present, the highest defect is defXconCCM). |
Defect Flags |
Displays the number of defect flags. |
Mac Address |
Displays the MAC address of the MEP. |
CcmLtmPriority |
Displays the priority value transmitted in the linktrace messages (LTM)s and CCMs for this MEP. The MEP must be configured on a VLAN. |
CcmTx |
Displays the number of Continuity Check Messages (CCM) sent. The count is taken from the last polling interval (every 10 s). |
CcmSequenceErr |
Displays the number of CCM errors. |
Eth-1DM Threshold |
Displays the one-way-delay threshold value. |
Eth-Ais |
Displays the state of the ETH-AIS test (enabled or disabled). |
Eth-Test |
Displays the state of the ETH-Test (enabled or disabled). |
CcmLastFailure Frame |
Displays the frame that caused the last CCM failure. |
XconCcmFailure Frame |
Displays the frame that caused the XconCCMFailure. |
Mep Loopback Information |
|
LbRxReply |
Displays the number of received loopback (LB) replies. |
LbRxBadOrder |
Displays the number of received loopback messages that are in a bad order. |
LbRxBadMsdu |
Displays the number of loopback replies that have been received with the wrong destination MAC address (MSDU = MAC Service Data Unit). |
LbTxReply |
Displays the number of loopback replies transmitted out this MEP. |
LbTxReply (Total) |
Displays the total number of LBRs (loopback replies) transmitted from this MEP. |
LbTxReplyNoTLV |
Displays the number of LBRs (loopback replies) transmitted from this MEP with no TLV. Because only LBMs with no TLVs are used for throughput testing, the LbTxReply (Total), LbTxReplyNoTLV, and LbTxReplyWithTLV counters can help debug problems if throughput testing is not working. |
LbTxReplyWithTLV |
Displays the number of LBRs (loopback replies) transmitted from this MEP with TLV. |
LbSequence |
Displays the sequence number in the loopback message. |
LbNextSequence |
Displays the next loopback sequence. |
LbStatus |
Displays the loopback status as True or False: True — loopback is in progress False — no loopback is in progress |
LbResultOk |
Displays the result of the loopback test. |
DestIsMepId |
Identifies whether the destination interface has a MEP-ID (true or false). |
DestMepId |
Displays the MEP-ID of the destination interface. |
DestMac |
Displays the MAC address of the destination interface. |
SendCount |
Indicates the number of loopback messages sent. |
VlanDropEnable |
Identifies whether the VLAN drop is enabled (true or false). |
VlanPriority |
Displays the VLAN priority. |
Data TLV |
Displays the data TLV information. |
Mep Linktrace Message Information |
|
LtRxUnexplained |
Displays the number of unexplained linktrace messages (LTM) that have been received. |
LtNextSequence |
Displays the sequence number of the next linktrace message. |
LtStatus |
Displays the status of the linktrace. |
LtResult |
Displays the result of the linktrace. |
TargIsMepId |
Identifies whether the target interface has a MEP-ID (true or false). |
TargMepId |
Displays the MEP-ID of the target interface. |
TargMac |
Displays the MAC address of the target interface. |
TTL |
Displays the TTL value. |
EgressId |
Displays the egress ID of the linktrace message. |
SequenceNum |
Displays the sequence number of the linktrace message. |
LtFlags |
Displays the linktrace flags. |
Mep Linktrace Replies |
|
SequenceNum |
Displays the sequence number returned by a previous transmit linktrace message, indicating which linktrace message response will be returned. |
ReceiveOrder |
Displays the order in which the linktrace initiator received the linktrace replies. |
Ttl |
Displays the TTL field value for a returned linktrace reply. |
Forwarded |
Indicates whether the linktrace message was forwarded by the responding MEP. |
LastEgressId |
Displays the last egress identifier returned in the linktrace reply egress identifier TLV of the linktrace reply. The last egress identifier identifies the MEP linktrace initiator that initiated, or the linktrace responder that forwarded, the linktrace message for which this linktrace reply is the response. This is the same value as the egress identifier TLV of that linktrace message. |
TerminalMep |
Indicates whether the forwarded linktrace message reached a MEP enclosing its MA. |
NextEgressId |
Displays the next egress identifier returned in the linktrace reply egress identifier TLV of the linktrace reply. The next egress identifier identifies the linktrace responder that transmitted this linktrace reply and can forward the linktrace message to the next hop. This is the same value as the egress identifier TLV of the forwarded linktrace message, if any. |
Relay |
Displays the value returned in the Relay Action field. |
ChassisIdSubType |
Displays the format of the chassis ID returned in the Sender ID TLV of the linktrace reply, if any. This value is meaningless if the chassis ID has a length of 0. |
ChassisId |
Displays the chassis ID returned in the Sender ID TLV of the linktrace reply, if any. The format is determined by the value of the ChassisIdSubType. |
ManAddressDomain |
Displays the TDomain that identifies the type and format of the related ManAddress, used to access the SNMP agent of the system transmitting the linktrace reply. Received in the linktrace reply Sender ID TLV from that system. |
ManAddress |
Displays the TAddress that can be used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. |
IngressMac |
Displays the MAC address returned in the ingress MAC address field. |
Ingress Action |
Displays the value returned in the Ingress Action field of the linktrace message. |
IngressPortIdSubType |
Displays the format of the ingress port ID. |
IngressPortId |
Displays the ingress port ID; the format is determined by the value of the IngressPortIdSubType. |
EgressMac |
Displays the MAC address returned in the egress MAC address field. |
Egress Action |
Displays the value returned in the Egress Action field of the linktrace message. |
EgressPortIdSubType |
Displays the format of the egress port ID. |
EgressPortId |
Displays the egress port ID; the format is determined by the value of the EgressPortIDSubType. |
Org Specific TLV |
Displays all organization-specific TLVs returned in the linktrace reply, if any. Includes all octets including and following the TLV length field of each TLV, concatenated. |
Eth-Test |
|
Peer Mac Addr |
Displays the MAC address of the peer (remote) entity. |
FrameCount |
Displays the number of test frames sent between the MEP and the peer entity. |
ByteCount |
Displays the number of bytes sent between the MEP and the peer entity. |
Current ErrBits |
Displays the number of bit errors in the current test. |
Current CrcErrs |
Displays the number of CRC errors in the current test. |
Accumulate ErrBits |
Displays the accumulated number of bit errors in the current test. |
Accumulate CrcErrs |
Displays the accumulated number of CRC errors in the current test. |
Delay Measurement Test |
|
Peer Mac Addr |
Displays the MAC address of the peer (remote) entity. |
Delay (us) |
Displays the measured delay (in microseconds) for the DM test. |
Delay Variation (us) |
Displays the measured delay variation (in microseconds) for the DV test. |
mip
show>eth-cfm>mip
Supported on all 7210 SAS platforms as described in this document
This command displays Maintenance Intermediate Point (MIP) information.
The following output is an example of MIP information, and Table: Output fields: MIP describes the output fields.
Sample output*A:7210SAS# show eth-cfm mip
==========================================================================
CFM SAP MIP Table
==========================================================================
Sap Mip-Enabled Mip Mac Address
--------------------------------------------------------------------------
1/1/16 yes 00:a1:b1:c1:d1:e1
==========================================================================
==========================================================================
CFM SDP MIP Table
==========================================================================
Sdp Mip-Enabled Mip Mac Address
--------------------------------------------------------------------------
456:123 yes 00:a2:b2:c2:d2:e2
==========================================================================
*A:7210SAS#
Label | Description |
---|---|
Mip-Enabled |
Displays the state of the MIP service |
Mip Mac Address |
Displays the MAC address of the MIP |
connection-profile [conn-prof-id] [associations]
show
Supported on all 7210 SAS platforms as described in this document
This command displays connection profile information.
Specifies the connection profile ID.
Displays the SAP and the service ID that use this connection profile.
The following outputs are examples of connection profile information, and Table: Output fields: connection profile describes the output fields.
Sample output*7210SAS>show# connection-profile
===============================================================================
Connection Profile Summary Information
===============================================================================
CP Index Number of HasRange
Members
-------------------------------------------------------------------------------
1 0 Yes
2 0 Yes
3 0 Yes
5 0 Yes
6 0 Yes
100 0 Yes
200 0 Yes
300 0 Yes
400 0 Yes
500 0 Yes
600 0 Yes
700 0 Yes
800 0 Yes
900 0 Yes
===============================================================================
*7210SAS>show#
Sample output for connection-profile associations
*A:7210SAS>show# connection-profile associations
===============================================================================
Connection Profile Summary Information
===============================================================================
CP Index Number of HasRange
Members
-------------------------------------------------------------------------------
1 0 No
===============================================================================
*A:7210SAS>show#
Label | Description |
---|---|
CP Index |
Identifies the connection-profile. |
Number of Members |
Indicates the number of ATM connection profile members not applicable for 7210 SAS. |
HasRange |
Indicates whether VLAN range is configured. |