To establish a console connection, you need the following:
an ASCII terminal or a PC running terminal emulation software set to the parameters shown in Table: Console Configuration Parameter Values
a standard serial cable with a male DB9 connector
Parameter |
Value |
|---|---|
Baud Rate |
115 200 |
Data Bits |
8 |
Parity |
None |
Stop Bits |
1 |
Flow Control |
None |
Figure: 7705 SAR Console Port displays an example of the Console port on a 7705 SAR front panel.
To establish a console connection:
Connect the terminal to the Console port on the front panel (Figure: 7705 SAR Console Port) using the serial cable.
Power on the terminal.
Establish the connection by pressing the <Enter> key a few times on your terminal keyboard.
At the router prompt, enter the login and password.
The default login is admin.
The default password is admin.