Post-Boot Configuration Extension Files

Two post-boot configuration extension files are supported and are triggered when either a successful or failed boot configuration file is processed. The commands specify URLs for the CLI scripts to be run following the completion of the boot-up configuration. A URL must be specified or no action is taken. The commands are persistent between router (re)boots and are included in the configuration saves (admin>save).

CLI Syntax:

config>system 
    boot-bad-exec file-url
    boot-good-exec file-url

Example:

config>system# boot-bad-exec ftp://t:t@192.168.xx.xxx/./
fail.cfg
config>system# boot-good-exec
ftp://test:test@192.168.xx.xxx/./
ok.cfg

The following example displays the command output:

ALU-1>config>system# info
#------------------------------------------
echo "System Configuration"
#------------------------------------------
        name "ALU-1"
        contact "Fred Information Technology"
        location "Bldg.1-floor 2-Room 201"
        clli-code "abcdefg1234"
        coordinates "N 45 58 23, W 34 56 12"
        config-backup 7
        boot-good-exec "ftp://test:test@192.168.xx.xxx/./ok.cfg"
        boot-bad-exec "ftp://test:test@192.168.xx.xxx/./fail.cfg"
        sync-if-timing
            begin
            ref-order ref1 ref2 bits
..
----------------------------------------------
ALU-1>config>system#