Show Commands

Note:

The following command outputs are examples only; actual displays may differ depending on supported functionality and user configuration.

bof

Syntax

bof [cflash-id|booted]

Context

show

Description

This command displays the BOF executed on the last system boot or on the specified device.

If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified since the system boot, a message displays.

Parameters

cflash-id

the cflash directory name. The slot name is not case-sensitive. Use uppercase or lowercase ‟A” or ‟B” for the slot name.

Values

see Table: URL Types and Syntax for parameter descriptions and values

booted

displays the BOF used to boot the system

Output

The following outputs are examples of BOF information, and Table: BOF Field Descriptions describes the fields.

Output Example
A:ALU-1# show bof cf3:
===============================================================================
BOF on CF3:
===============================================================================
    primary-image    ftp://*:*@192.168.192.64/cephwreg10/images/both.tim
    primary-config   ftp://*:*@192.168.192.64/cephwreg10/images/dut-a.cfg
    encryption-key   *
    password         *
    address          xxx.xxx.xxx.xx /24 active
    primary-dns      138.120.252.55
    secondary-dns    138.120.252.48
    tertiary-dns     138.120.252.49
    dns-domain       labs.ca.alcatel-lucent.com
    static-route     135.121.0.0/16 next-hop 192.168.192.63
    static-route     138.120.0.0/16 next-hop 192.168.192.63
    static-route     152.148.0.0/16 next-hop 192.168.192.63
    autonegotiate
    duplex           full
    speed            100
    wait             4
    persist          off  
    no fips-140-2         
    console-speed    115200
    encrypt          on
===============================================================================
A:ALU-1#
A:ALU-1# show bof booted
===============================================================================
System booted with BOF
===============================================================================
    primary-image    ftp://*:*@192.168.192.64/cephwreg10/images/both.tim
    primary-config   ftp://*:*@192.168.192.64/cephwreg10/images/dut-a.cfg
    encryption-key   *
    password         *
    address          xxx.xxx.xxx.xx /24 active
    primary-dns      138.120.252.55
    secondary-dns    138.120.252.48
    tertiary-dns     138.120.252.49
    dns-domain       labs.ca.alcatel-lucent.com
    static-route     135.121.0.0/16 next-hop 192.168.192.63
    static-route     138.120.0.0/16 next-hop 192.168.192.63
    static-route     152.148.0.0/16 next-hop 192.168.192.63
    autonegotiate
    duplex           full
    speed            100
    wait             4
    persist          off  
    no fips-140-2         
    console-speed    115200
    encrypt          on
===============================================================================
A:ALU-1#
Table: BOF Field Descriptions

Label

Description

primary-image

The primary location of the directory that contains the runtime images of the CSM

primary-config

The primary location of the file that contains the configuration

encryption-key

The encrypted encryption key

password

The encrypted password

address

The IP address and mask associated with the CSM Management port or the secondary CSM Management port

primary-dns

The primary DNS server for resolution of hostnames to IP addresses

secondary-dns

The secondary DNS server for resolution of hostnames to IP addresses

tertiary-dns

The tertiary DNS server for resolution of hostnames to IP addresses

dns-domain

The domain name used when performing DNS address resolution

static-route

The static route entry for the CSM Management port in the running configuration and the BOF

autonegotiate

no autonegotiate — autonegotiate is not enabled

autonegotiate — autonegotiate is enabled

duplex

half — specifies that the system uses half duplex

full — specifies that the system uses full duplex

speed

The speed of the CSM Ethernet interface

wait

The time configured for the boot to pause while waiting for console input

persist

Indicates whether the system preserves system indexes when a save command is executed

fips-140-2

Indicates whether FIPS-140-2 is enabled on the node

console speed

The console port baud rate

encrypt

on — BOF encryption is enabled

off — BOF encryption is not enabled

boot-messages

Syntax

boot-messages

Context

show

Description

This command displays boot messages generated during the last system boot.

Output

The following output is an example of boot messages.

Output Example
A:ALU-1# show boot-messages 
===============================================================================
cf3:/bootlog.txt
===============================================================================
Boot log started on CPU#0
  Build: X-2.1.R1 on Tue Apr 1 16:25:56 EDT 2016 by csabuild

Total Memory: 992MB  Chassis Type: sar8  Card Type: corona_r1
TiMOS-L-2.1.R1 boot/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 9 09:36:02 EDT 2016 by csabuild in /rel2.0/b1/R1/panos/main

TiMOS BOOT LOADER
Time from clock is FRI APR 11 13:31:16 2016 UTC
Switching serial output to sync mode...
Total Memory: 992MB  Chassis Type: sar8  Card Type: corona_r1

TiMOS-B-2.1.R1 both/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 9 09:53:01 EDT 2016 by csabuild in /rel2.0/b1/R1/panos/main

   ___                    ___           ___           ___
  /\  \                  /\__\         /\  \         /\  \
  \:\  \        ___     /::|  |       /::\  \       /::\  \
   \:\  \      /\__\   /:|:|  |      /:/\:\  \     /:/\ \  \
   /::\  \    _\/__/  /:/|:|__|__   /:/  \:\  \   _\:\~\ \  \
  /:/\:\__\  /\__\   /:/ |::::\__\ /:/__/ \:\__\ /\ \:\ \ \__\
 /:/  \/__/ /:/  /   \/__/~~/:/  / \:\  \ /:/  / \:\ \:\ \/__/
/:/  /     /:/  /          /:/  /   \:\  /:/  /   \:\ \:\__\
\/__/      \/__/          /:/  /     \:\/:/  /     \:\/:/  /
                         /:/  /       \::/  /       \::/  /
                         \/__/         \/__/         \/__/

Time from clock is FRI APR 11 13:31:57 2016 UTC
Initial DNS resolving preference is ipv4-only

CRITICAL: CLI #1001 Cannot locate the configuration file -
Using default configuration values.

MAJOR: CLI #1008 The SNMP daemon is disabled.  To enable SNMP, execute the comma
nd 'config>system>snmp no shutdown'.
TiMOS-B-2.1.R1 both/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 9 09:53:01 EDT 2016 by csabuild in /rel2.0/b1/R1/panos/main


Login: 
===============================================================================
cf3:/bootlog_prev.txt
===============================================================================
Boot log started on CPU#0
  Build: X-2.1.R1 on Tue Apr 1 16:25:56 EDT 2016 by csabuild

Total Memory: 992MB  Chassis Type: sar8  Card Type: corona_r1
TiMOS-L-2.1.R1 boot/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 9 09:36:02 EDT 2016 by csabuild in /rel2.0/b1/R1/panos/main

TiMOS BOOT LOADER
Time from clock is FRI APR 11 13:30:38 2016 UTC
Switching serial output to sync mode...

reboot
===============================================================================