Configuring Codirectional G.703 Ports

Use the following CLI syntax to configure a codirectional G.703 port on an 8-port Voice & Teleprotection card.

CLI Syntax:

port port-id
    tdm
        codir
            channel-group channel-group-id
                description description-string
                encap-type cem
                mode access
                no shutdown
            loopback {internal | line}
            report-alarm {ais | los}
            no shutdown

The following CLI syntax shows an example of configuring a codirectional G.703 port on an 8-port Voice & Teleprotection card.

Example:

config# port 1/1/2
config>port# tdm
config>port>tdm>codir
config>port>tdm>codir# channel-group 1
config>port>tdm>codir>channel-group# description ‟CG 1”
config>port>tdm>codir>channel-group# encap-type cem
config>port>tdm>codir>channel-group# mode access
config>port>tdm>codir>channel-group# no shutdown
config>port>tdm>codir>channel-group# exit
config>port>tdm>codir# loopback line
config>port>tdm>codir# report-alarm ais
config>port>tdm>codir# no shutdown
config>port>tdm>codir# exit
config>port>tdm# exit