This section provides the CLI syntax and examples to configure the following:
Configuring APS Port Parameters
Configuring LCR Parameters
Configuring a Microwave Link
Configuring Ethernet Port Parameters
Configuring SONET/SDH Port Parameters
SONET/SDH Channelized Port Configuration Examples
Configuring Voice Ports
Configuring Codirectional G.703 Ports
Configuring Teleprotection Ports
Configuring TDM PPP
Configuring Channelized Ports
Configuring Fractional T1/E1 Ports for PPP Encapsulation
Configuring T1 Line Buildout
Configuring DS1 or E1 SSM
Configuring ATM Interface Parameters
Configuring Multilink PPP Bundles
Configuring MC-MLPPP
Configuring LAG Parameters
Configuring Multilink ATM Inverse Multiplexing (IMA) Groups
Configuring SDI Ports for IPCP Encapsulation
Configuring TDM and SDI Ports for Frame Relay Encapsulation
Configuring TDM and SDI Ports for HDLC Encapsulation
Configuring TDM and SDI Ports for Cisco HDLC Encapsulation
Configuring GNSS Receiver Port Parameters
Configuring Serial Ports for Raw Socket Transport