When configuring a SONET/SDH port, users configure both SONET/SDH and TDM aspects of a channel. The CLI uses the sonet-sdh-index variable to identify a channel in order to match SONET/SDH parameters with TDM parameters for the channel. Configuring TDM on a SONET/SDH port is similar to configuring it on a TDM port. See Configuring Channelized Ports for additional information.
This section shows the CLI syntax for the following adapter cards and provides examples for configuring SONET/SDH access and network ports:
4-port OC3/STM1 Clear Channel Adapter card
2-port OC3/STM1 Channelized Adapter card
4-port OC3/STM1 / 1-port OC12/STM4 Adapter card
4-port OC3/STM1 Clear Channel Adapter Card
Use the following CLI syntax to configure SONET/SDH port parameters on a 4-port OC3/STM1 Clear Channel Adapter card. On the 4-port OC3/STM1 Clear Channel Adapter card, the sonet-sdh-index variable in the path command is optional and defaults to sts3, which cannot be changed.
port port-id
sonet-sdh
clock-source {loop-timed | node-timed}
framing {sonet | sdh}
hold-time {[up hold-time-up] [down hold-time-down]}
loopback {line | internal}
path [sonet-sdh-index]
atm
cell-format cell-format
min-vp-vpi value
crc {16 | 32}
description long-description-string
encap-type {atm | ppp-auto}
mode {access | network}
mtu mtu
network
accounting-policy policy-id
collect-stats
queue-policy name
payload
ppp
keepalive time-interval [dropcount drop-count]
report-alarm [pais] [plop] [prdi] [pplm] [prei] [puneq]
scramble
[no] shutdown
signal-label value
trace-string [trace-string]
report-alarm [loc] [lais] [lrdi] [lb2er-sd] [lb2er-sf] [slof][slos] [lrei]
section-trace {increment-z0 | byte value | string string}
speed {oc3}
threshold {ber-sd | ber-sf} rate threshold
tx-dus
2-port OC3/STM1 Channelized Adapter Card and 4-port OC3/STM1 / 1-port OC12/STM4 Adapter Card
Use the following CLI syntax to configure SONET/SDH port parameters on a 2-port OC3/STM1 Channelized Adapter card or a 4-port OC3/STM1 / 1-port OC12/STM4 Adapter card. The sonet-sdh-index values are different for each of these adapter cards (see SONET/SDH for more information). The syntax includes the TDM port parameters.
port port-id
sonet-sdh
clock-source {loop-timed | node-timed}
framing {sonet | sdh}
group sonet-sdh-index payload {tu3 | vt2 | vt15}
hold-time {[up hold-time-up] [down hold-time-down]}
loopback {line | internal}
path sonet-sdh-index
atm description-string
cell-format cell-format
min-vp-vpi value
crc {16|32}
description long-description-string
encap-type encap-type
mode {access | network}
mtu mtu
network
accounting-policy policy-id
collect-stats mtu
queue-policy name
ppp
keepalive time-interval [dropcount drop-count]
report-alarm [pais] [plop] [prdi] [pplm] [prei] [puneq] [plcd]
scramble
[no] shutdown
signal-label value
trace-string [trace-string]
report-alarm [loc] [lais] [lrdi] [ss1f] [lb2er-sd] [lb2er-sf] [slof] [slos] [lrei]
section-trace {increment-z0 | byte value | string string}
speed {oc3 | oc12}
tx-dus
tdm
ds1 [ds1-id]
channel-group channel-group
atm
cell-format cell-format
min-vp-vpi value
cisco-hdlc
down-count down-count
keepalive time-interval
up-count up-count
crc {16|32}
description long-description-string
encap-type {atm|bcp-null| bcp-dot1q|ipcp|ppp-auto| frame-relay|wan-mirror| cisco-hdlc|cem|hdlc}
frame-relay
lmi-type {ansi|itu|none|rev1}
mode {dce|dte|bidir}
n391dte intervals
n392dce threshold
n392dte threshold
n393dce count
n393dte count
t391dte keepalive
t392dce keepalive
idle-cycle-flag {flags|ones}
idle-payload-fill {all-ones| pattern}
idle-signal-fill {all-ones| pattern}
loopback {line|internal}
mac ieee-address
mode {access|network}
mtu mtu-bytes
network
accounting-policy policy-id
collect-stats
queue-policy name
ppp
ber-sf-link-down
keepalive time-period [dropcount drop-count]
scramble
[no] shutdown
signal-mode cas
timeslots timeslots
clock-source {loop-timed|node-timed| adaptive| differential}
framing {esf|sf|ds1-unframed}
hold-time {[up hold-time-up] [down hold-time-down]}
loopback {line|internal| fdl-ansi|fdl-bellcore|payload-ansi}
remote-loop-respond
report-alarm [ais] [los] [oof] [rai] [looped] [ber-sd] [ber-sf]
[no] shutdown
signal-mode cas
threshold {ber-sd|ber-sf} rate {1|5|10|50|100}
ds3 [sonet-sdh-index]
atm
cell-format cell-format
mapping mapping
min-vp-vpi value
channelized {ds1|e1}
clock-source {loop-timed|node-timed| differential|free-run}
crc {16|32}
description long-description-string
encap-type {atm|bcp-null|bcp-dot1q| ipcp|ppp-auto|frame-relay|wan-mirror| cisco-hdlc|cem}
feac-loop-respond
frame-relay
lmi-type {ansi|itu|none|rev1}
mode {dce|dte|bidir}
n391dte intervals
n392dce threshold
n392dte threshold
n393dce count
n393dte count
t391dte keepalive
t392dce keepalive
framing {c-bit|m23|ds3-unframed}
idle-cycle-flag {flags|ones}
loopback {line|internal|remote}
mac ieee-address
mdl {eic|lic|fic|unit|pfi|port|gen} mdl-string
mdl-transmit {path|idle-signal| test-signal}
mode {access|network}
mtu mtu-bytes
network
accounting-policy policy-id
collect-stats
queue-policy name
ppp
keepalive time-period [dropcount drop-count]
report-alarm [ais] [los] [oof] [rai] [looped]
scramble
[no] shutdown