Configuring Teleprotection Ports

Use the following CLI syntax to configure a teleprotection port on an 8-port Voice & Teleprotection card or 8-port C37.94 Teleprotection card.

CLI Syntax:

port port-id
    tdm
        tpif
            channel-group channel-group-id
                description description-string
                encap-type cem
                mode access
                no shutdown
                timeslots timeslots
            framing {framed | unframed}
            loopback {internal | line}
            report-alarm {los | rai}
            no shutdown

The following CLI syntax shows an example of configuring a teleprotection port on an 8-port Voice & Teleprotection card or an 8-port C37.94 Teleprotection card.

Example:

config# port 1/1/3
config>port# tdm
config>port>tdm>tpif
config>port>tdm>tpif# channel-group 1
config>port>tdm>tpif>channel-group# description ‟TPIF 1”
config>port>tdm>tpif>channel-group# encap-type cem
config>port>tdm>tpif>channel-group# mode access
config>port>tdm>tpif>channel-group# timeslots 1
config>port>tdm>tpif>channel-group# no shutdown
config>port>tdm>tpif>channel-group# exit
config>port>tdm>tpif# framing framed
config>port>tdm>tpif# loopback internal
config>port>tdm>tpif# report-alarm los
config>port>tdm>tpif# no shutdown
config>port>tdm>tpif# exit
config>port>tdm# exit