access
config>card>mda
This command enables the access context to configure QoS policy parameters for the specified adapter card.
network
config>card>mda
This command enables the network context to configure QoS policy parameters for the specified adapter card.
ingress
config>card>mda>access
config>card>mda>network
This command enables the context to configure the QoS policy parameters for ingress traffic, in either an access or network context, for the specified adapter card.
fabric-policy fabric-policy-id
no fabric-policy
config>card>mda>access>ingress
config>card>mda>network>ingress
This command configures (applies) the ingress fabric policy, in either an access or network context, for the specified adapter card.
Fabric profiles do not apply to the Auxiliary Alarm card.
The no form of this command resets the fabric-policy-id to the default value.
1
an existing fabric policy ID
queue-policy name
no queue-policy
config>card>mda>network>ingress
This command specifies the network ingress queue policy that defines queue parameters such as CBS, high-priority-only burst size, MBS, CIR, and PIR rates, as well as forwarding class-to-queue mappings. The network queue policy is defined in the config>qos>network-queue context. Refer to the 7705 SAR Quality of Service Guide, ‟Network Queue QoS Policies”, for more information.
The no form of this command reverts to the default.
‟default”
specifies an existing network queue policy name
security-queue-policy policy-id
no security-queue-policy
config>card>mda>access>ingress
config>card>mda>network>ingress
This command applies an existing security queue policy, in either an access or network context, to the specified adapter card.
The no form of this command sets the policy-id back to the default.
1
specifies an existing security queue policy ID
shaper-policy policy-name
no shaper-policy policy-name
config>card>mda>access>ingress
This command enables the context to assign a shaper policy to an Ethernet MDA.
For access ingress per-customer aggregate shaping, the shaper policy is assigned to an Ethernet MDA and SAPs on that Ethernet MDA must be bound to a shaper group within the shaper policy bound to that Ethernet MDA.
The default shaper policy cannot be deleted. Table: Shaper Policy Defaults displays the default shaper policy parameters.
Field |
Default |
|---|---|
description |
‟Default Shaper QoS policy.” |
shaper-group |
‟default” |
description |
‟Default Shaper Group.” |
pir-rate |
max |
cir-rate |
0 |
The no form of this command removes the configured shaper-policy.
shaper-policy ‟default”
the name of the shaper policy. To access the default shaper policy, enter ‟default”.
keyword used to create a shaper policy
ring
config>card>mda>network
This command specifies the QoS policy parameters for ring traffic in a network, for the 2-port 10GigE (Ethernet) Adapter card or 2-port 10GigE (Ethernet) module.
add-drop-port-queue-policy name
no add-drop-port-queue-policy
config>card>mda>network>ring
This command specifies the network queue policy to be applied to the add/drop port on the bridging domain side of a ring adapter card. The network queue policy is defined in the config>qos>network-queue context. Refer to the 7705 SAR Quality of Service Guide, ‟Network Queue QoS Policies”, for more information.
The ring ports and the add/drop port cannot use the same non-default network queue policy that is being used by the v-port and any other port on other cards.
no add-drop-port-queue-policy
specifies an existing network queue policy
qos-policy network-policy-id
no qos-policy
config>card>mda>network>ring
This command specifies the network QoS policy for the ring. Only a ring type network QoS policy can be assigned to a port on the bridging domain side of a ring adapter card.
no qos-policy
specifies the network QoS policy for the ring ports and the add/drop port on a ring adapter card
spt
config>card>mda
config>system
This command enables the context for configuring SPT (self-processed traffic) parameters. The config>card>mda context is used for the 7705 SAR-8 Shelf V2, 7705 SAR-18, and 7705 SAR-X. The config>system context is used for the 7705 SAR-Hc, 7705 SAR-H, and 7705 SAR-Wx.
n/a
security-aggregate-rate agg-rate
no security-aggregate-rate
config>card>mda>spt
config>system>spt
This command configures the fabric aggregate rate for security queues on the datapath. The command is configured in the config>card>mda>spt context for the 7705 SAR-8 Shelf V2, 7705 SAR-18, and 7705 SAR-X, and in the config>system>spt context for the 7705 SAR-Hc, 7705 SAR-H, and 7705 SAR-Wx.
specifies the aggregate rate for security queues, in kilobits per second