Show ATM Port Commands

port

Syntax

port port-id atm

port port-id atm connections

port port-id atm pvc [vpi/vci] [detail]

port port-id atm pvp [vpi] [detail]

Context

show

Description

This command displays ATM port information.

If no command line options are specified, the command port displays summary information for all ports on provisioned adapter cards.

Parameters

port-id

specifies the physical port ID

Syntax

port-id

slot[/mda[/port]] or slot/mda/port[.channel], where:

slot

1

mda

1 to 6 (7705 SAR-8 Shelf V2)

1 to 12 (7705 SAR-18)

port

1 to 2 (2-port OC3/STM1 Channelized Adapter card ports)

1 to 4 (4-port OC3/STM1 Clear Channel Adapter card ports or 4-port DS3/E3 Adapter card ports)

1 to 16 (16-port T1/E1 ASAP Adapter card ports)

1 to 32 (32-port T1/E1 ASAP Adapter card ports)

channel

1 to 24 (DS1) or 1 to 32 (E1)

atm

displays ATM information

connections

displays ATM connection information

pvc

displays ATM port PVC information

pvp

displays ATM port PVP information

vpi/vci

vpi: 0 to 4095 (NNI; not supported on SONET/SDH ports), 0 to 255 (UNI)

                vci: 1, 2, 5 to 65534

detail

provides detailed information

Output

The following outputs are examples of ATM information:

Output Example
*A:ALU-1># show port 1/1/3.sts3 atm
=============================================================================
ATM Info for 1/1/3
=============================================================================
Cell Mode             : UNI               Mapping            : Direct
Configured VCs        : 0                 Configured VPs     : 0
Configured VTs        : 0                 Configured IFCs    : 0
Configured minimum VPI: 0
Last Unknown VPI/VCI  : none
=============================================================================
TC Sublayer Information
=============================================================================
TC Alarm State        : LCD Failure       Number OCD Events  : 0
HEC Errors (Dropped)  : 0                 HEC Errors (Fixed) : 0
===============================================================================
ATM Bandwidth Info
===============================================================================
                     kbps      %                             kbps      %
-------------------------------------------------------------------------------
Ingress CBR        : 0          0%      Egress CBR         : 0          0%
Ingress RT-VBR     : 0          0%      Egress RT-VBR      : 0          0%
Ingress NRT-VBR    : 0          0%      Egress NRT-VBR     : 0          0%
Ingress UBR        : 0          0%      Egress UBR         : 0          0%
-------------------------------------------------------------------------------
Ingress Total      : 0          0%      Egress Total       : 0          0%
ATM Link Bandwidth : 149760 kbps
Shaped Bandwidth   : 0 kbps
===============================================================================
Table: Port ATM Field Descriptions

Label

Description

Cell Mode

The cell format (UNI or NNI) that is used on the ATM interface (NNI is not supported on SONET/SDH ports)

Configured VCs

The number of configured VCs

Configured VTs

The number of configured VTs

Configured minimum VPI

The configured minimum allowable VPI value that can be used on the ATM interface for a VPC

Last Unknown VPI/VCI

The last unknown VPI/VCI that was received on this interface

Mapping

Direct: direct ATM cell mapping is used

Configured VPs

The number of configured VPs

Configured IFCs

The number of configured IFCs

TC Alarm State

The ATM interface notifications indicating that the TC sublayer is currently in the Loss of Cell Delineation (LCD) defect maintenance state or that the TC sublayer is currently not in the Loss of Cell Delineation (LCD) defect maintenance state

HEC Errors (Dropped)

The number of cells with uncorrectable HEC errors on this interface

Number OCD Events

The number of times the Out of Cell Delineation (OCD) events occurred

HEC Errors (Fixed)

The number of cells with correctable HEC errors on this interface

Ingress CBR

The total CBR bandwidth consumed on this interface in the ingress direction

Ingress RT-VBR

The total real-time variable bit rate (rt-VBR) bandwidth consumed on this interface in the ingress direction

Ingress NRT-VBR

The total non-real-time variable bit rate (nrt-VBR) bandwidth consumed on this interface in the ingress direction

Ingress UBR

The total unspecified bit rate (UBR) bandwidth consumed on this interface in the ingress direction

Egress CBR

The total CBR bandwidth consumed on this interface in the egress direction

Egress RT-VBR

The total real-time variable bit rate (rt-VBR) bandwidth consumed on this interface in the egress direction

Egress NRT-VBR

The total non-real-time variable bit rate (nrt-VBR) bandwidth consumed on this interface in the egress direction

Egress UBR

The total unspecified bit rate (UBR) bandwidth consumed on this interface in the egress direction

Ingress Total

The total bandwidth of all service categories consumed on this interface in the ingress direction

Egress Total

The total bandwidth of all service categories consumed on this interface in the egress direction

ATM Link Bandwidth

The total ATM link bandwidth accepted on this interface

Shaped Bandwidth

The total shaped bandwidth consumed on this interface in the egress direction

Output Example
A:ALU-1># show port 1/1/1.1 atm connections 
================================================================
ATM Connections, Port 1/1/1.1
================================================================
           Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr 
----------------------------------------------------------------
0/100      SAP    PVC      101     201     up   up          up  
0/101      SAP    PVC      101     201     up   up          up  
0/102      SAP    PVC      101     201     up   up          up  
0/103      SAP    PVC      101     201     up   up          up  
0/104      SAP    PVC      101     201     up   up          up  
0/105      SAP    PVC      101     201     up   up          up  
0/106      SAP    PVC      101     201     up   up          up  
0/107      SAP    PVC      101     201     up   up          up  
0/108      SAP    PVC      101     201     up   up          up  
0/109      SAP    PVC      101     201     up   up          up  
0/110      SAP    PVC      101     201     up   up          up  
0/111      SAP    PVC      101     201     up   up          up  
0/112      SAP    PVC      101     201     up   up          up  
0/113      SAP    PVC      101     201     up   up          up  
0/114      SAP    PVC      101     201     up   up          up  
================================================================
Table: Port ATM Connections Field Descriptions

Label

Description

Owner

The system entity that owns a specific ATM connection

Type

The connection type

Ing. TD

The ATM traffic descriptor profile that applies to the receive direction of the interface connection

Egr. TD

The ATM traffic descriptor profile that applies to the transmit direction of the interface connection

Adm

The administrative state of the interface connection

OAM

The OAM operational status of ATM connections:

Up: the interface is operationally up

ETE-AIS: the endpoint is down and is generating end-to-end AIS OAM cells to alert the far end that it is down

Opr

The status of the ATM interface

Output Example
*A:ALU-1># show port 1/1/1.1 atm pvc
================================================================
ATM PVCs, Port 1/1/1.1
================================================================
VPI/VCI    Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr
----------------------------------------------------------------
0/32       SAP    PVC      1       1       up   ETE-AIS     dn
================================================================
*A:ALU-1>
Table: Port ATM PVC Field Descriptions

Label

Description

VPI/VCI

The VPI/VCI values

Owner

The system entity that owns a specific ATM connection

Type

The connection type

Ing. TD

The ATM traffic descriptor profile that applies to the receive direction of the interface connection

Egr. TD

The ATM traffic descriptor profile that applies to the transmit direction of the interface connection

Adm

The administrative state of the interface connection

OAM

The OAM operational status of ATM connections:

Up: the interface is operationally up

ETE-AIS: the endpoint is down and is generating end-to-end AIS OAM cells to alert the far end that it is down

Opr

The status of the ATM interface

Output Example
*A:ALU-1># show port 1/1/1.1 atm pvc 0/32
==============================================================================
ATM PVC
==============================================================================
Port Id            : 1/1/1.1             VPI/VCI            : 0/32
Admin State        : up                  Oper state         : down
OAM State          : ETE-AIS             Encap Type         : n/a
Owner              : SAP                 AAL Type           : n/a
Endpoint Type      : PVC                 Cast Type          : P2P
Ing. Td Idx        : 1                   Egr. Td Idx        : 1
Last Changed       : 11/08/2007 17:02:36 ILMI Vpi/Vci Range : n/a
==============================================================================
*A:ALU-1>#
Table: Port ATM PVC VPI/VCI Field Descriptions

Label

Description

Port Id

The port ID configured or displayed in the slot/mda/port format

VPI/VCI

The VPI/VCI values

Admin State

The administrative state of the interface connection

Oper State

The status of the ATM interface

OAM State

The OAM operational status of ATM connections:

Up: the interface is operationally up

ETE-AIS: the endpoint is down and is generating end-to-end AIS OAM cells to alert the far end that it is down

Encap Type

The encapsulation type

Owner

The system entity that owns a specific ATM connection

Endpoint Type

The endpoint type

Cast Type

The connection topology type

Ing. TD Idx

The ATM traffic descriptor profile that applies to the receive direction of the interface connection

Egr. TD Idx

The ATM traffic descriptor profile that applies to the transmit direction of the interface connection

Output Example
*A:ALU-1># show port 1/1/1.1 atm pvc 0/32 detail
==============================================================================
ATM PVC
==============================================================================
Port Id            : 1/1/1.1             VPI/VCI            : 0/32
Admin State        : up                  Oper state         : down
OAM State          : up                  Encap Type         : n/a
Owner              : SAP                 AAL Type           : n/a
Endpoint Type      : PVC                 Cast Type          : P2P
Ing. Td Idx        : 1                   Egr. Td Idx        : 1
Last Changed       : 11/08/2007 17:02:36 ILMI Vpi/Vci Range : n/a
==============================================================================
===============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                              1643                   1643
Cells                                                 31                     31
CLP=0 Cells                                           31                     31
Dropped CLP=0 Cells                                    0                      0
Dropped Cells (CLP=0+1)                                0
Tagged Cells                                           0
===============================================================================
===============================================================================
ATM OAM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Loopback                                               0                      0
OAM Cells (generated)                                  0
===============================================================================
Table: Port ATM PVC VPI/VCI Detail Field Descriptions

Label

Description

Port Id

The port ID configured or displayed in the slot/mda/port format

VPI/VCI

The VPI/VCI values

Admin State

The administrative state of the interface connection

Oper State

The status of the ATM interface

OAM State

The OAM operational status of ATM connections:

Up: the interface is operationally up

ETE-AIS: the endpoint is down and is generating end-to-end AIS OAM cells to alert the far end that it is down

Encap Type

The encapsulation type

Owner

Identifies the system entity that owns a specific ATM connection

AAL Type

The ATM Adaptation Layer 5 (AAL5) information

Endpoint Type

The endpoint type

Cast Type

The connection topology type

Ing. Td Idx

The ATM traffic descriptor profile that applies to the receive direction of the interface connection

Egr. Td Idx

The ATM traffic descriptor profile that applies to the transmit direction of the interface connection

Last Changed

The date and time that the interface connection entered its current operational state

Octets

The number of input and output octets

HEC discarded cells are not included in the input octet numbers

Cells

The number of input and output cells

HEC discarded cells are not included in the input cell numbers

CLP=0 Cells

The number of CLP=0 cells

Dropped CLP=0 Cells

The number of dropped CLP=0 cells

Dropped Cells (CLP=0+1)

The number of dropped CLP=0+1 cells

Tagged Cells

The number of tagged cells

Loopback

The number of loopback requests and responses transmitted and received on this connection for both end-to-end and segment

OAM Cells (generated)

The number of OAM cells generated at the endpoint and sent towards the network

Output Example
*A:ALU-1># show port 1/1/1.1 atm pvp
================================================================
ATM PVPs, Port 1/1/1.1
================================================================
VPI        Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr
----------------------------------------------------------------
2          SAP    PVP      1       1       up   up          up  
================================================================
Table: Port ATM PVP Field Descriptions

Label

Description

VPI

The VPI value

Owner

The system entity that owns a specific ATM connection

Type

The type of connection

Ing.TD

The ATM traffic descriptor profile that applies to the receive direction of the interface connection

Egr.TD

The ATM traffic descriptor profile that applies to the transmit direction of the interface connection

Adm

Up: the interface is administratively up

Down: the interface is administratively down

OAM

The OAM operational status of ATM connections:

Up: the interface is operationally up

ETE-AIS: the endpoint is down and is generating end-to-end AIS OAM cells to alert the far end that it is down

Opr

Up: the interface is operationally up

Down: the interface is operationally down

Output Example
*A:ALU-1>show port 1/1/1.1 atm pvp 11 detail
==============================================================================
ATM PVP
==============================================================================
Port Id            : 1/1/1.1             VPI                : 11              
Admin State        : up                  Oper state         : up              
OAM State          : up                                                       
Owner              : SAP                                                      
Endpoint Type      : PVP                 Cast Type          : P2P             
Ing. Td Idx        : 1                   Egr. Td Idx        : 1               
Last Changed       : 02/01/2000 00:37:25 ILMI Vpi Range     : n/a             
==============================================================================
===============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                              1007                   1007
Cells                                                 19                     19
CLP=0 Cells                                           19                     19
Dropped CLP=0 Cells                                    0                      0
Dropped Cells (CLP=0+1)                                0                       
Tagged Cells                                           0                       
===============================================================================
===============================================================================
ATM OAM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Loopback                                              0                      0
OAM Cells 
(generated)                                           0                        
===============================================================================
*A:ALU-1># 
Table: Port ATM PVP Detail Field Descriptions

Label

Description

Port Id

The port ID configured or displayed in the slot/mda/port format

VPI

The VPI values

Admin State

The administrative state of the interface connection

Oper State

The status of the ATM interface

OAM State

The OAM operational status of ATM connections:

Up: the interface is operationally up

ETE-AIS: the endpoint is down and is generating end-to-end AIS OAM cells to alert the far end that it is down

Owner

The system entity that owns a specific ATM connection

Endpoint Type

The endpoint type

Cast Type

The connection topology type

Ing. Td Idx

The ATM traffic descriptor profile that applies to the receive direction of the interface connection

Egr. Td Idx

The ATM traffic descriptor profile that applies to the transmit direction of the interface connection

Last Changed

The date and time that the interface connection entered its current operational state

Octets

The number of input and output octets

HEC discarded cells are not included in the input octet numbers

Cells

The number of input and output cells

HEC discarded cells are not included in the input cell numbers

CLP=0 Cells

The number of CLP=0 cells

Dropped CLP=0 Cells

The number of dropped CLP=0 cells

Dropped Cells (CLP=0+1)

The number of dropped CLP=0+1 cells

Tagged Cells

The number of tagged cells

Loopback

The number of loopback requests and responses transmitted and received on this connection for both end-to-end and segment

OAM Cells (generated)

The number of OAM cells generated at the endpoint and sent towards the network