lag [lag-id] [detail] [statistics]
lag lag-id associations
lag lag-id bfd
lag [lag-id] description
lag lag-id [detail] lacp-partner
lag [lag-id] port
show
This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
displays information only on the specified LAG
displays detailed LAG information
displays LAG statistics information
displays a list of current router interfaces with which the LAG is associated
displays LAG BFD information
displays a list of all LAGs and LAG ports and their descriptions
displays information about the LACP partner (detail keyword provides detailed information)
displays information about the specified LAG port or all LAG ports
The following outputs are examples of LAG information:
Summary (Output Example, Table: LAG Summary Field Descriptions )
Detail (Output Example, Table: LAG Detailed Field Descriptions )
Statistics (Output Example, Table: LAG Statistics Field Descriptions )
Associations (Output Example, Table: LAG Associations Field Descriptions )
Description (Output Example, Table: LAG Description Field Descriptions )
LACP partner (Output Example, Table: LAG LACP Partner Field Descriptions )
LACP partner (detail) (Output Example, Table: LAG Detailed LACP Partner Field Descriptions )
*A:ALU-1># show lag
===============================================================================
Lag Data
===============================================================================
Lag-id Adm Opr Port-Threshold Up-Link-Count MC Act/Stdby
-------------------------------------------------------------------------------
1 up down 0 0 N/A
2 up down 1 0 N/A
3 up up 0 1 N/A
-------------------------------------------------------------------------------
Total Lag-ids: 3 Single Chassis: 3 MC Act: 0 MC Stdby: 0
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
Lag-id |
The LAG identifier |
Adm |
Up: the LAG is administratively up |
Down: the LAG is administratively down |
|
Opr |
Up: the LAG is operationally up |
Down: the LAG is operationally down |
|
Port-Threshold |
The number of operational links at or below which the LAG is considered to be operationally down |
Up-Link-Count |
The number of ports that are physically present and have physical links present |
MC Act/Stdby |
N/A |
*A:ALU-1># show lag 2 detail
===============================================================================
LAG Details
===============================================================================
Description : LAG2
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 2 Mode : access
Adm : up Opr : down
Thres. Exceeded Cnt : 0 Port Threshold : 1
Thres. Last Cleared : 08/19/2011 14:35:28 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : 2001:db8:: Lag-IfIndex : 1342177282
Hardware Address : 2001:db8::52:0:1 Adapt Qos : N/A
Hold-time Down : 0.0 sec Port Type : standard
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 2 Forced : -
System Id : a4:58:ff:00:00:00 System Priority : 32768
Admin Key : 32769 Oper Key : 32769
Prtr System Id : Prtr System Priority : 0
Prtr Oper Key : 0
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/4/3 up active down yes 1 - 1
1/5/3 up standby down 2 - 2
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/4/3 actor Yes Yes No No No Yes Yes Yes
1/4/3 partner Yes Yes No No No No Yes No
1/5/3 actor Yes Yes No No No Yes Yes Yes
1/5/3 partner Yes Yes No No No No Yes No
===============================================================================
*A:ALU-1>#
The following example displays LAG details with MC-LAG output
*A:ALU-1># show lag 2 detail
===============================================================================
LAG Details
===============================================================================
Description : LAG2
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 2 Mode : access
Adm : up Opr : down
Thres. Exceeded Cnt : 0 Port Threshold : 1
Thres. Last Cleared : 08/19/2011 14:35:28 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : 2001:db8:: Lag-IfIndex : 1342177282
Hardware Address : 2001:db8::52:0:1 Adapt Qos : N/A
Hold-time Down : 0.0 sec Port Type : standard
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 2 Forced : -
System Id : a4:58:ff:00:00:00 System Priority : 32768
Admin Key : 32769 Oper Key : 32769
Prtr System Id : Prtr System Priority : 0
Prtr Oper Key : 0
MC Peer Address : 10.10.10.4 MC Peer Lag-id : 1
MC System ID : 11.11.11.11:11:11 MC System Priority : 3
MC Admin Key : 12 MC Active/Standby : active
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : peer timed out, selected local subgroup
MC Config Mismatch : no mismatch
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/4/3 up active down yes 1 - 1
1/5/3 up standby down 2 - 2
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/4/3 actor Yes Yes No No No Yes Yes Yes
1/4/3 partner Yes Yes No No No No Yes No
1/5/3 actor Yes Yes No No No Yes Yes Yes
1/5/3 partner Yes Yes No No No No Yes No
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
Lag-id |
The LAG identifier |
Mode |
The mode of the LAG: access or network |
Adm |
Up: the LAG is administratively up |
Down: the LAG is administratively down |
|
Opr |
Up: the LAG is operationally up |
Down: the LAG is operationally down |
|
Thres. Exceeded Cnt |
The number of times that the drop count was reached |
Port Threshold |
The number of operational links at or below which the LAG is regarded as operationally down |
Thres. Last Cleared |
The last time that keepalive statistics were cleared |
Threshold Action |
Action to take when the number of operational links is equal to or below the port threshold |
Dynamic Cost |
n/a |
Encap Type |
The encapsulation method used to distinguish customer traffic on a LAG |
Configured Address |
The base chassis Ethernet MAC address |
Lag-IfIndex |
A unique number assigned to this interface |
Hardware Address |
The hardware address |
Adapt Qos |
The configured QoS mode |
Hold-time Down |
The hold-time, in tenths of seconds, before a failure is reported to higher levels |
Port Type |
Standard: standard Ethernet port types are supported |
LACP |
Enabled: LACP is enabled |
Disabled: LACP is disabled |
|
Mode |
Active: LACP operates in active mode |
Passive: LACP operates in passive mode |
|
Role |
Actor: local device (7705 SAR) participating in LACP negotiation |
Partner: remote device participating in LACP negotiation |
|
LACP Transmit Intvl |
LACP timeout signaled to peer |
LACP xmit stdby |
LACP transmit on standby links enabled or disabled |
Selection Criteria |
Configured subgroup selection criteria |
Slave-to-partner |
Slave-to-partner flag enabled or disabled |
Number of sub-groups |
Total subgroups in LAG |
Forced |
n/a |
System Id |
System ID used by actor in LACP messages |
System Priority |
System priority used by actor in LACP messages |
Admin Key |
Configured LAG key |
Oper Key |
Key used by actor in LACP messages |
Prtr System Id |
System ID used by partner in LACP messages |
Prtr System Priority |
System priority used by partner in LACP messages |
Prtr Oper Key |
Key used by partner in LACP messages |
MC Peer Address |
IP address of the MC-LAG peer |
MC Peer Lag-id |
The LAG identifier of the MC-LAG peer |
MC System Id |
System ID used by the MC-LAG actor in LACP messages |
MC System Priority |
System priority used by the MC-LAG actor in LACP messages |
MC Admin Key |
Configured MC-LAG key |
MC Active/Standby |
Indicates whether the port is in active or standby mode |
MC Lacp ID in use |
Indicates whether MC-LAG values such as system-id, system priority, and lacp-key are advertised to the LACP peer |
MC extended timeout |
Indicates whether the system is using a larger value than the value configured as the MC-LAG hold-on-neighbor-failure value |
MC Selection Logic |
The current state of the MC-LAG protocol, indicating which of the two MC-LAG redundancy systems is the master |
MC Config Mismatch |
Indicates whether there is a LAG configuration mismatch between redundancy systems, and what is mismatched |
Port-id |
The member physical port ID expressed in slot/mda/port format |
Adm |
Up: the member port is administratively up |
Down: the member port is administratively down |
|
Act/Stdby |
Active: the member port is active |
Standby: the member port is on standby |
|
Opr |
Up: the member port is operationally up |
Down: the member port is operationally down |
|
Primary |
Indicates whether the member port is the primary port |
Sub-group |
The member port subgroup |
Prio |
The member port priority |
*A:ALU-1># show lag 2 statistics
===============================================================================
LAG Statistics
===============================================================================
Description : LAG2
Port-id Input Input Output Output Input Output
Bytes Packets Bytes Packets Errors Errors
-------------------------------------------------------------------------------
1/4/3 0 9968 0 9833 0 0
1/5/3 0 435 0 401 0 0
-------------------------------------------------------------------------------
Totals 0 10403 0 10234 0 0
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
Port-id |
The member physical port ID expressed in slot/mda/port format |
Input Bytes |
The number of inbound bytes for the LAG on a per-port basis |
Input Packets |
The number of inbound packets for the LAG on a per-port basis |
Output Bytes |
The number of outbound bytes for the LAG on a per-port basis |
Output Packets |
The number of outbound packets for the LAG on a per-port basis |
Input Errors |
The number of inbound packets (for packet-oriented interfaces) or inbound transmission units (for character-oriented or fixed-length interfaces) that contained errors preventing them from being delivered to higher layers |
Output Errors |
The number of outbound packets (for packet-oriented interfaces) or outbound transmission units (for character-oriented or fixed-length interfaces) that could not be transmitted because of errors |
*A:ALU-1># show lag 1 associations
===============================================================================
Interface Table
===============================================================================
Router/ServiceId Name Encap Val
-------------------------------------------------------------------------------
Router: Base ies-337-30.30.30.1 104
-------------------------------------------------------------------------------
Interfaces
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
Router/ServiceId |
The service associated with the LAG |
Name |
The name of the IP interface |
Encap Val |
The dot1q or qinq values of the port for the IP interface |
A:7705:Dut-A# show lag 2 bfd �
===============================================================================�
LAG BFD�
===============================================================================�
Disable soft reset extension: false�
===============================================================================�
�
===============================================================================�
LAG BFD IP address families�
===============================================================================�
ipv4�
-------------------------------------------------------------------------------�
Administrative state : enabled�
Local IP address : 12.1.2.2�
Remote IP address : 12.1.2.1�
Transmit interval (ms) : 100�
Receive interval (ms) : 100�
Multiplier : 3�
Max admin down time (s) : 0�
Max set-up time (ms) : infinite�
BFD on distributing : false�
Last management change : 03/16/2022 11:34:25�
===============================================================================�
�
===============================================================================�
LAG 2 member ports BFD �
===============================================================================�
Port State Session Remaining Remaining�
admin-down(s) set-up(ms)�
-------------------------------------------------------------------------------�
1/1/4 up up 0 0�
1/1/19 up up 0 0�
===============================================================================�
A:7705:Dut-A#�
Label |
Description |
|---|---|
Disable soft reset extension |
Displays whether the disable soft reset extension function is enabled (true) or disabled (false) (not applicable for the 7705 SAR) |
LAG BFD IP address families |
|
ipv4 |
|
Administrative state |
The administrative state of the micro-BFD session, either enabled or disabled |
Local IP address |
The IPv4 address of the BFD source |
Remote IP address |
The IPv4 address of the BFD destination |
Transmit interval (ms) |
The transmit interval time used for micro-BFD sessions over the associated LAG links, in milliseconds |
Receive interval (ms) |
The receive interval time used for micro-BFD sessions over the associated LAG links, in milliseconds |
Multiplier |
The detect multiplier used for a micro-BFD session over the associated LAG links |
Max admin down time (s) |
The maximum length of time, in seconds, that the router continues to forward traffic over a link after the micro-BFD session has transitioned to a down state |
Max set-up time (ms) |
The maximum length of time, in milliseconds, that the router forwards traffic over a link that has transitioned from standby to active before the micro-BFD session is fully established (up state) |
BFD on distributing |
Displays whether the bfd-on-distributing-only function is enabled (true) or disabled (false) |
Last management change |
The date and time of the last management change |
LAG x member ports BFD |
|
Port |
The LAG BFD member port |
State |
The administrative state of the LAG BFD member port, either up or down |
Session |
The administrative state of the micro-BFD session, either up or down |
Remaining admin-down (s) |
The max-admin-down-time remaining, in seconds, that the router continues to forward traffic over a link after the micro-BFD session has transitioned to a down state |
Remaining set-up (ms) |
The max-setup-time remaining, in milliseconds, that the router forwards traffic over a link that has transitioned from standby to active before the micro-BFD session is fully established (up state) |
*A:ALU-1># show lag description
===============================================================================
Lag Port States
LACP Status: e - Enabled, d - Disabled
===============================================================================
Lag-id Port-id Adm Act/Stdby Opr Description
-------------------------------------------------------------------------------
1(e) up down N/A
1/1/7 up standby down 10/100/Gig Ethernet SFP
1/6/1 up active down 10/100/Gig Ethernet SFP
2(e) up down N/A
1/6/3 up active down 10/100/Gig Ethernet SFP
1/7/3 up standby down 10/100/Gig Ethernet SFP
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
Lag Port States |
|
LACP Status |
Indicates whether LACP is enabled or disabled |
Lag-id |
The LAG identifier and LACP status code |
Port-id |
The member physical port ID |
Adm |
Indicates the administrative state of the member port: up or down |
Act/Stdby |
Indicates whether the port is in active or standby mode |
Opr |
Indicates the operational state of the member port: up or down |
Description |
The description strings configured for the LAG and member ports |
*A:ALU-1># show lag 1 lacp-partner
===============================================================================
LAG Partner information
===============================================================================
Partner system ID : ea:3e:ff:00:00:00
Partner system priority : 32768
Partner operational key : 2
===============================================================================
===============================================================================
LAG 1 Ports Partner operational information
===============================================================================
Port Actor Port Prio Key
port
-------------------------------------------------------------------------------
1/1/7 33863 33864 5 2
1/6/1 34177 34178 7 2
===============================================================================
===============================================================================
LAG 1 Ports Partner operational state information
===============================================================================
Port Exp Def Dist Col Syn Aggr Time Act
out
-------------------------------------------------------------------------------
1/1/7 No No Yes Yes Yes Yes Yes Yes
1/6/1 No No Yes Yes Yes Yes Yes Yes
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
LAG Partner information |
|
Partner system ID |
The system ID of the partner (remote device) |
Partner system priority |
The system priority used by the partner in LACP messages |
Partner operational key |
The key used by the partner in LACP messages |
LAG 1 Ports Partner operational information |
|
Port |
The member physical port ID |
Actor port |
The actor (local device) port associated with the member port |
Port |
The partner port associated with the member port |
Prio |
The partner port priority associated with the member port |
Key |
The partner operational key associated with the member port |
LAG 1 Ports Partner operational state information |
|
Port |
The member physical port ID |
Exp |
(Expired) – indicates whether the partner is in the Expired state; if Yes, the LAG is not operational |
Def |
(Default) – indicates whether the partner information (system priority, key, port priority, and state of the partner) is the default information that is configured administratively or is information received through LACPDUs. Default partner information is used if LACPDUs were not received on time. |
Dist |
(Distributing) – indicates whether the distribution of outgoing frames is enabled or disabled on the link |
Col |
(Collecting) – indicates whether the collection of incoming frames is enabled or disabled on the link |
Syn |
(Synchronization) – indicates whether the link is allocated to the correct LAG |
Aggr |
(Aggregation) – indicates whether link aggregation is enabled or disabled on the port |
Time out |
Indicates whether a timeout value is set for the port |
Act |
(Activity) – indicates whether the link is active (port can send and receive LACPDU messages) or passive (port does not initiate LACP messages but will respond to LACP messages) |
*A:ALU-1># show lag 1 detail lacp-partner
===============================================================================
LAG Partner information
===============================================================================
Partner system ID : de:41:ff:00:00:00
Partner system priority : 32768
Partner operational key : 32768
===============================================================================
-------------------------------------------------------------------------------
LAG port 1/1/7 partner information
-------------------------------------------------------------------------------
Actor port : 33863
Partner admin system prio : 32768
Partner oper system prio : 32768
Partner admin system ID : 00:00:00:00:00:00
Partner oper system ID : de:41:ff:00:00:00
Partner admin key : 0
Partner oper key : 32768
Partner admin port : (Not Specified)
Partner oper port : 33864
Partner admin port prio : 32768
Partner oper port prio : 32768
Partner admin state : (Not Specified)
Partner oper state : lacp-timeout, aggregation synchronization
collecting distributing
-------------------------------------------------------------------------------
LAG port 1/6/1 partner information
-------------------------------------------------------------------------------
Actor port : 34177
Partner admin system prio : 32768
Partner oper system prio : 32768
Partner admin system ID : 00:00:00:00:00:00
Partner oper system ID : de:41:ff:00:00:00
Partner admin key : 0
Partner oper key : 32768
Partner admin port : (Not Specified)
Partner oper port : 34178
Partner admin port prio : 32768
Partner oper port prio : 32768
Partner admin state : (Not Specified)
Partner oper state : lacp-timeout, aggregation synchronization
collecting distributing
-------------------------------------------------------------------------------
*A:ALU-1>#
Label |
Description |
|---|---|
LAG Partner information |
|
Partner system ID |
The system ID of the partner (remote device) |
Partner system priority |
The system priority used by the partner in LACP messages |
Partner operational key |
The key used by the partner in LACP messages |
LAG port port-id partner information |
|
Actor port |
The actor (local device) port associated with the member port |
Partner admin system prio |
The partner administrative system priority associated with the member port |
Partner oper system prio |
The partner operational system priority associated with the member port |
Partner admin system ID |
The partner administrative system ID associated with the member port |
Partner oper system ID |
The partner operational system ID associated with the member port |
Partner admin key |
The partner administrative key associated with the member port |
Partner oper key |
The partner operational key associated with the member port |
Partner admin port |
The partner administrative port associated with the member port |
Partner oper port |
The partner operational port associated with the member port |
Partner admin port prio |
The partner administrative port priority associated with the member port |
Partner oper port prio |
The partner operational port priority associated with the member port |
Partner admin state |
The administrative state of the partner |
Partner oper state |
The operational state of the partner |
*A:ALU-1># show lag 1 port
===============================================================================
Lag Port States
LACP Status: e - Enabled, d - Disabled
===============================================================================
Lag-id Port-id Adm Act/Stdby Opr Primary Sub-group Forced Priority
-------------------------------------------------------------------------------
1(e) 1/1/7 up standby down yes 2 - 32768
1/6/1 up active down 1 - 32768
===============================================================================
*A:ALU-1>#
Label |
Description |
|---|---|
Lag Port States |
|
LACP status |
Indicates whether LACP is enabled or disabled |
Lag-id |
The LAG identifier and LACP status code |
Port-id |
The member physical port ID |
Adm |
Indicates the administrative state of the member port: up or down |
Act/Stdby |
Indicates whether the member port is in active or standby mode |
Opr |
Indicates the operational state of the member port: up or down |
Primary |
Indicates whether the member port is the primary port |
Sub-group |
The member port sub-group |
Forced |
n/a |
Priority |
The member port priority |