port-tree port-id
show
This command displays the tree for SONET/SDH ports or channels.
The same show>port-tree display is used for both SONET and SDH. The SONET nomenclature is used to show both SONET and SDH hierarchies.
specifies the physical port ID
Syntax |
slot[/mda[/port]] or slot/mda/port[.channel] |
The following output is an example of port-tree information, and Table: Port-tree Field Descriptions describes the fields.
Output Example*A:ALU-A# show port-tree 1/5/1
ifIndex type, sonet-sdh-index (* = provisioned)
======== =========================================
44072960 Port, N/A *
580943873 STS3, none
580943933 STS1, sts1-1
N/A VTG, 1.1
580943945 VT2, vt2-1.1.1
580943946 E1, 1.1.1
580943979 VT2, vt2-1.1.2
580943980 E1, 1.1.2
580944013 VT2, vt2-1.1.3
580944014 E1, 1.1.3
...
N/A VTG, 3.7
580946003 VT2, vt2-3.7.1
580946004 E1, 3.7.1
580946037 VT2, vt2-3.7.2
580946038 E1, 3.7.2
580946071 VT2, vt2-3.7.3
580946072 E1, 3.7.3
*A:ALU-A#
Label |
Description |
|---|---|
IfIndex |
Displays the interface number of the index, which reflects its initialization sequence |
type |
Specifies the OC3 bandwidth subdivision |
sonet-sdh-index |
Specifies the sonet-sdh-index |
* |
Indicates that the port or channel is provisioned |