Configuring RSVP-TE LSPs with PCEP Using the CLI

This section provides information about using the CLI to configure and operate RSVP-TE LSPs with PCEP.

The following information describes the detailed configuration of an inter-area RSVP-TE LSP with both a primary path and a secondary path. The network uses IS-IS with the backbone area in Level 2 and the leaf areas in Level 1. Topology discovery is learned by the NRC-P using IGP and the NSP NFM-P.

The LSP uses an admin-group constraint to keep the paths of the secondary and primary links disjoint in the backbone area. The LSP is PCE-controlled but also has pce-computation enabled so that the initial path, and any MBB path, is also computed by the PCE.

The NSP and 7705 SAR load versions used to produce this example in this section are:

This section provides configuration and show commands for the following examples:

Parent topic: PCEP