Figure: Multi-level IS-IS Topology in the NSP GUI shows a multi-level IS-IS topology in the NSP GUI.
The following example shows the configuration and show command output of the PCEP on the PCE node and the PCC node.
The 7705 SAR operates as a PCE Client (PCC) only, supporting PCC capabilities for RSVP-TE LSPs and SR-TE LSPs. References to PCE router operation apply to the 7750 SR product family and are included for informational purposes only.
*A:PCE Server 226>config>router>pcep>pce# info
----------------------------------------------
local-address 192.168.48.226
no shutdown
----------------------------------------------
*A:Reno 194>config>router>pcep>pcc# info
----------------------------------------------
peer 192.168.48.226
no shutdown
exit
no shutdown
----------------------------------------------
*A:PCE Server 226>config>router>pcep>pce# show router pcep pce status
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Element (PCE) Info
===============================================================================
Admin Status : Up Oper Status : Up
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 30 seconds DeadTimer Interval : 120 seconds
Capabilities List : stateful-delegate stateful-pce segment-rt-path
Local Address : 192.168.48.226
PCE Overloaded : false
-------------------------------------------------------------------------------
PCEP Path Computation Element (PCE) Peer Info
-------------------------------------------------------------------------------
Peer Sync State Oper Keepalive/Oper DeadTimer
-------------------------------------------------------------------------------
192.168.48.190:4189 done 30/120
192.168.48.194:4189 done 30/120
192.168.48.198:4189 done 30/120
192.168.48.199:4189 done 30/120
192.168.48.219:4189 done 30/120
192.168.48.221:4189 done 30/120
192.168.48.224:4189 done 30/120
-------------------------------------------------------------------------------
===============================================================================
*A:Reno 194# show router pcep pcc status
=======================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
=======================================================================
Admin Status : Up Oper Status : Up
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 30 seconds DeadTimer Interval : 120 seconds
Capabilities List : stateful-delegate stateful-pce segment-rt-path
Address : 192.168.48.194
Report Path Constraints: True
-----------------------------------------------------------------------
PCEP Path Computation Client (PCC) Peer Info
-----------------------------------------------------------------------
Peer Admin State/Oper State Oper Keepalive/Oper DeadTimer
-----------------------------------------------------------------------
192.168.48.226 Up/Up 30/120
-----------------------------------------------------------------------
=======================================================================
*A:Reno 194# show router pcep pcc lsp-db
=======================================================================
PCEP Path Computation Client (PCC) LSP Update Info
=======================================================================
PCEP-specific LSP ID: 11
LSP ID : 14378 LSP Type : rsvp-p2p
Tunnel ID : 1 Extended Tunnel Id : 192.168.48.194
LSP Name : From Reno to Atlanta RSVP-TE::primary_empty
Source Address : 192.168.48.194 Destination Address : 192.168.48.224
LSP Delegated : True Delegate PCE Address: 192.168.48.226
Oper Status : active
-----------------------------------------------------------------------
PCEP-specific LSP ID: 12
LSP ID : 14380 LSP Type : rsvp-p2p
Tunnel ID : 1 Extended Tunnel Id : 192.168.48.194
LSP Name : From Reno to Atlanta RSVP-TE::secondary_empty
Source Address : 192.168.48.194 Destination Address : 192.168.48.224
LSP Delegated : True Delegate PCE Address: 192.168.48.226
Oper Status : up
=======================================================================