interface [ip-int-name|ip-address] statistics [detail]
show>router>rsvp
This command shows RSVP-TE interface information.
identifies the network IP interface. The interface name cannot be in the form of an IP address. Allowed values are any string up to 32 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes
the system or network interface IP address
the IP address and the number of packets sent and received on an per-interface basis
displays detailed information
The following outputs are examples of RSVP-TE interface information:
RSVP-TE Interface (Output Example, Table: Router RSVP-TE Interface Field Descriptions)
RSVP-TE Interface Detail (Output Example, Table: Router RSVP-TE Interface Detail Field Descriptions)
RSVP-TE Interface Statistics (Output Example, Table: Router RSVP-TE Interface Statistics Field Descriptions)
A:ALU-12# show router rsvp interface
===============================================================================
RSVP Interfaces
===============================================================================
Interface Total Active Total BW Resv BW Adm Opr
Sessions Sessions (Mbps) (Mbps)
-------------------------------------------------------------------------------
system - - - - Up Up
ip-10.10.1.1 1 1 100 0 Up Up
ip-10.10.2.1 1 1 100 0 Up Up
ip-10.10.3.1 0 0 100 0 Up Up
-------------------------------------------------------------------------------
Interfaces : 4
===============================================================================
A:ALU-12#
Label |
Description |
|---|---|
Interface |
The name of the IP interface |
Total Sessions |
The total number of RSVP-TE sessions on this interface. This count includes sessions that are active as well as sessions that have been signaled but a response has not yet been received. |
Active Sessions |
The total number of active RSVP-TE sessions on this interface |
Total BW (Mbps) |
The amount of bandwidth in megabits per second (Mbps) available to be reserved for the RSVP-TE protocol on the interface |
Resv BW (Mbps) |
The amount of bandwidth in megabits per second (Mbps) reserved on this interface. A value of zero (0) indicates that no bandwidth is reserved. |
Adm |
Down — the RSVP-TE interface is administratively disabled |
Up — the RSVP-TE interface is administratively enabled |
|
Opr |
Down — the RSVP-TE interface is operationally down |
Up — the RSVP-TE interface is operationally up |
|
Interfaces |
The number of interfaces listed in the display |
A: ALU-12# show router rsvp interface ‟ip-10.10.1.1” detail
===============================================================================
RSVP Interfaces (Detailed): ip-10.10.1.1
-------------------------------------------------------------------------------
Interface : ip-10.10.1.1
-------------------------------------------------------------------------------
Interface : ip-10.10.1.1
Port ID : 1/1/1
Admin State : Up Oper State : Up
Active Sessions : 0 Active Resvs : 0
Total Sessions : 0
Subscription : 10 % Port Speed : 1000 Mbps
Total BW : 100 Mbps Aggregate : Dsabl
Hello Interval : 3000 ms Hello Timeouts : 0
Key Type Auth : Disabled
Keychain Auth : Disabled
Auth Rx Seq Num : n/a Auth Key Id : n/a
Auth Tx Seq Num : n/a Auth Win Size : n/a
Refresh Reduc. : Disabled Reliable Deli. : Disabled
Bfd Enabled : No Graceful Shut. : Disabled
ImplicitNullLabel : Disabled* GR helper : Disabled
IGP Update
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100 *
Down Thresholds(%): 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0 *
IGP Update Pending: No
Next Update : N/A
No Neighbors.
* Indicates Inherited Values
-------------------------------------------------------------------------------
A: ALU-12#
Label |
Description |
|---|---|
Interface |
The name of the IP interface |
Port ID |
The physical port bound to the interface |
Admin State |
Down — the RSVP-TE interface is administratively disabled |
Up — the RSVP-TE interface is administratively enabled |
|
Oper State |
Down — the RSVP-TE interface is operationally down |
Up — the RSVP-TE interface is operationally up |
|
Active Sessions |
The total number of active RSVP-TE sessions on this interface |
Active Resvs |
The total number of active RSVP-TE sessions that have reserved bandwidth |
Total Sessions |
The total number of RSVP-TE sessions on this interface. This count includes sessions that are active as well as sessions that have been signaled but a response has not yet been received. |
Subscription |
The percentage of the link bandwidth that RSVP-TE can use for reservation. When the value is zero (0), no new sessions are permitted on this interface. |
Port Speed |
The speed on the interface |
Total BW |
The amount of bandwidth in megabits per second (Mbps) available to be reserved for the RSVP-TE protocol on this interface |
Aggregate |
Indicates whether aggregate messages are sent. Aggregate messages are used to pack multiple RSVP messages into a single packet to reduce the network overhead. When the value is true, RSVP negotiates with each neighbor and gets consensus before sending aggregate messages. |
Hello Interval |
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. A value of zero (0) indicates that the sending of hello messages is disabled. A value of n/a indicates that the interface is an unnumbered interface. |
Hello Timeouts |
The total number of Hello messages that timed out on this RSVP-TE interface. A value of n/a indicates that the interface is an unnumbered interface. |
Auth Rx Seq Num |
The received MD5 sequence number |
Auth Key Id |
The MD5 key identifier |
Auth Tx Seq Num |
The transmitted MD5 sequence number |
Auth Win Size |
The MD5 window size |
Refresh Reduc. |
Indicates whether refresh reduction capabilities are enabled or disabled |
Reliable Deli. |
Indicates whether reliable delivery is enabled or disabled |
Bfd Enabled |
Indicates whether BFD is enabled or disabled on the RSVP-TE interface. A value of n/a indicates that BFD is not applicable because the interface is an unnumbered interface. |
Graceful Shut. |
Indicates whether graceful shutdown is enabled or disabled |
ImplicitNullLabel |
Indicates whether the implicit null label is enabled or disabled |
GR helper |
Indicates whether Graceful-Restart Helper is enabled or disabled |
IGP Update |
|
Up Thresholds (%) |
Indicates up threshold levels for the interface |
Down Thresholds (%) |
Indicates down threshold levels for the interface |
IGP Update Pending |
Indicates whether an IGP update will occur |
Next Update |
Indicates when the next IGP update will be, if there is one pending |
A:ALU-12# show router rsvp interface statistics
===============================================================================
RSVP Interface (statistics)
===============================================================================
Interface system
-------------------------------------------------------------------------------
Interface : Up
Total Packets (Sent) : 0 (Recd.): 0
Bad Packets (Sent) : 0 (Recd.): 0
Paths (Sent) : 0 (Recd.): 0
Path Errors (Sent) : 0 (Recd.): 0
Path Tears (Sent) : 0 (Recd.): 0
Resvs (Sent) : 0 (Recd.): 0
Resv Confirms (Sent) : 0 (Recd.): 0
Resv Errors (Sent) : 0 (Recd.): 0
Resv Tears (Sent) : 0 (Recd.): 0
Refresh Summaries (Sent) : 0 (Recd.): 0
Refresh Acks (Sent) : 0 (Recd.): 0
Bundle Packets (Sent) : 0 (Recd.): 0
Hellos (Sent) : 0 (Recd.): 0
Auth Errors (Sent) : 0 (Recd.): 0
-------------------------------------------------------------------------------
Label |
Description |
|---|---|
Interface |
The name of the IP interface displayed in the header |
Interface (status) |
The status of the interface (up or down) |
Sent |
The total number of error-free RSVP-TE packets that have been transmitted on the RSVP-TE interface |
Recd |
The total number of error-free RSVP-TE packets received on the RSVP-TE interface |
Total Packets |
The total number of RSVP-TE packets, including errors, received on the RSVP-TE interface |
Bad Packets |
The total number of RSVP-TE packets with errors transmitted on the RSVP-TE interface |
Paths |
The total number of RSVP-TE PATH messages received on the RSVP-TE interface |
Path Errors |
The total number of RSVP-TE PATH ERROR messages transmitted on the RSVP-TE interface |
Path Tears |
The total number of RSVP-TE PATH TEAR messages received on the RSVP-TE interface |
Resvs |
The total number of RSVP-TE RESV messages received on the RSVP-TE interface |
Resv Confirms |
The total number of RSVP-TE RESV CONFIRM messages received on the RSVP-TE interface |
Resv Errors |
The total number of RSVP-TE RESV ERROR messages received on the RSVP-TE interface |
Resv Tears |
The total number of RSVP-TE RESV TEAR messages received on the RSVP-TE interface |
Refresh Summaries |
The total number of RSVP-TE RESV summary refresh messages received on the RSVP-TE interface |
Refresh Acks |
The total number of RSVP-TE RESV acknowledgment messages received when refresh reduction is enabled on the RSVP-TE interface |
Bundle Packets |
The total number of RSVP-TE RESV bundle packets received on the RSVP-TE interface |
Hellos |
The total number of RSVP-TE RESV HELLO REQ messages received on the RSVP-TE interface |
Auth Errors |
The number of authentication errors |
neighbor [ip-address][detail]
show>router>rsvp
This command displays RSVP-TE neighbors.
the IP address of the originating router
displays detailed information
The following output is an example of RSVP-TE neighbor information, and Table: Router RSVP-TE Neighbor Field Descriptions describes the fields.
Output Example*A:ALU-12>show>router>rsvp# neighbor
===============================================================================
RSVP Neighbors
===============================================================================
Legend :
LR - Local Refresh Reduction RR - Remote Refresh Reduction
LD - Local Reliable Delivery RM - Remote Node supports Message ID
===============================================================================
Neighbor Interface Hello Last Oper Flags
Change
===============================================================================
10.20.1.2 ip-10.10.1.1 N/A 0d 00:00:44
10.20.1.3 ip-10.10.2.1 N/A 0d 00:00:44
-------------------------------------------------------------------------------
Neighbors : 2
===============================================================================
Label |
Description |
|---|---|
Neighbor |
The IP address of the RSVP-TE neighbor |
Interface |
The interface ID of the RSVP-TE neighbor |
Hello |
The status of the Hello message |
Last Oper Change |
The time of the last operational change to the connection |
Flags |
Any flags associated with the connection to the neighbor |
session [session-type][from ip-address| to ip-address| lsp-name name][status {up | down}][detail]
show>router>rsvp
This command shows RSVP-TE session information.
specifies the session type
specifies the IP address of the originating router
specifies the IP address of the egress router
specifies the name of the LSP used in the path
specifies to display a session that is operationally up
specifies to display a session that is operationally down
displays detailed information
The following output is an example of RSVP-TE session information, and Table: Router RSVP-TE Session Field Descriptions describes the fields.
Output ExampleA:ALU-12# show router rsvp session
===============================================================================
RSVP Sessions
===============================================================================
From To Tunnel LSP Name State
ID ID
-------------------------------------------------------------------------------
10.20.1.3 10.20.1.1 1 37 C_A_1::C_A_1 Up
10.20.1.3 10.20.1.1 2 38 C_A_2::C_A_2 Up
10.20.1.3 10.20.1.1 3 39 C_A_3::C_A_3 Up
10.20.1.3 10.20.1.1 4 40 C_A_4::C_A_4 Up
10.20.1.1 10.20.1.3 2 40 A_C_2::A_C_2 Up
10.20.1.1 10.20.1.3 3 41 A_C_3::A_C_3 Up
10.20.1.1 10.20.1.3 4 42 A_C_4::A_C_4 Up
10.20.1.1 10.20.1.3 5 43 A_C_5::A_C_5 Up
10.20.1.1 10.20.1.3 6 44 A_C_6::A_C_6 Up
10.20.1.1 10.20.1.3 7 45 A_C_7::A_C_7 Up
10.20.1.1 10.20.1.3 8 46 A_C_8::A_C_8 Up
10.20.1.3 10.20.1.1 5 41 C_A_5::C_A_5 Up
10.20.1.3 10.20.1.1 6 42 C_A_6::C_A_6 Up
10.20.1.3 10.20.1.1 7 43 C_A_7::C_A_7 Up
10.20.1.3 10.20.1.1 8 44 C_A_8::C_A_8 Up
...
-------------------------------------------------------------------------------
Sessions : 65
===============================================================================
A:ALU-12#
A:ALU-12# show router rsvp session lsp-name A_C_2::A_C_2 status up
===============================================================================
RSVP Sessions
===============================================================================
From To Tunnel LSP Name State
ID ID
-------------------------------------------------------------------------------
10.20.1.1 10.20.1.3 2 40 A_C_2::A_C_2 Up
-------------------------------------------------------------------------------
Sessions : 1
===============================================================================
A:ALU-12#
Label |
Description |
|---|---|
From |
The IP address of the originating router |
To |
The IP address of the egress router |
Tunnel ID |
The ID of the ingress node of the tunnel supporting this RSVP-TE session |
LSP ID |
The ID assigned by the agent to this RSVP-TE session |
Name |
The administrative name assigned to the RSVP-TE session by the agent |
State |
Down — the operational state of this RSVP-TE session is down |
Up — the operational state of this RSVP-TE session is up |
statistics
show>router>rsvp
This command displays global statistics in the RSVP-TE instance.
The following output is an example of RSVP-TE statistics information, and Table: Router RSVP-TE Statistics Field Descriptions describes the fields.
Output ExampleA:ALU-12# show router rsvp statistics
=======================================================================
RSVP Global Statistics
=======================================================================
PATH Timeouts : 0 RESV Timeouts : 0
GR Helper PATH Tim*: 0 GR Helper RESV Tim*: 0
=======================================================================
Label |
Description |
|---|---|
PATH Timeouts |
The total number of PATH timeouts |
RESV Timeouts |
The total number of RESV timeouts |
GR Helper PATH Timeouts |
The total number of graceful restart helper PATH timeouts |
GR Helper RESV Timeouts |
The total number of graceful restart helper RESV timeouts |
status
show>router>rsvp
This command displays RSVP-TE operational status.
The following output is an example of RSVP-TE status information, and Table: Router RSVP-TE Status Field Descriptions describes the fields.
Output ExampleA:ALU-12# show router rsvp status
===============================================================================
RSVP Status
===============================================================================
Admin Status : Down Oper Status : Down
Keep Multiplier : 3 Refresh Time : 30 sec
Message Pacing : Disabled Pacing Period : 100 msec
Max Packet Burst : 650 msgs Refresh Bypass : Disabled
Rapid Retransmit : 5 hmsec Rapid Retry Limit : 3
Graceful Shutdown : Disabled SoftPreemptionTimer: 300 sec
GR Max Recovery : 300 sec GR Max Restart : 120 sec
Implicit Null Label: Disabled Node-id in RRO : Exclude
P2P Merge Point Ab*: Disabled P2MP Merge Point A*: Disabled
DiffServTE AdmModel: Basic Entropy Label : Disabled
Percent Link Bw CT0: 100 Percent Link Bw CT4: 0
Percent Link Bw CT1: 0 Percent Link Bw CT5: 0
Percent Link Bw CT2: 0 Percent Link Bw CT6: 0
Percent Link Bw CT3: 0 Percent Link Bw CT7: 0
TE0 -> Class Type : 0 Priority : 0
TE1 -> Class Type : 0 Priority : 1
TE2 -> Class Type : 0 Priority : 2
TE3 -> Class Type : 0 Priority : 3
TE4 -> Class Type : 0 Priority : 4
TE5 -> Class Type : 0 Priority : 5
TE6 -> Class Type : 0 Priority : 6
TE7 -> Class Type : 0 Priority : 7
IgpThresholdUpdate : Disabled
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0
Update Timer : N/A
Update on CAC Fail : Disabled
===============================================================================
Label |
Description |
|---|---|
Admin Status |
Down — RSVP-TE is administratively disabled |
Up — RSVP-TE is administratively enabled |
|
Oper Status |
Down — RSVP-TE is operationally down |
Up — RSVP-TE is operationally up |
|
Keep Multiplier |
The keep-multiplier number used by RSVP-TE to declare that a reservation is down or the neighbor is down |
Refresh Time |
The refresh-time interval, in seconds, between the successive PATH and RESV refresh messages |
Message Pacing |
Enabled — RSVP-TE messages, specified in the max-burst command, are sent in a configured interval, specified in the period command |
Disabled — message pacing is disabled. RSVP-TE message transmission is not regulated. |
|
Pacing Period |
The time interval, in milliseconds, during which the router can send the number of RSVP-TE messages specified in the max-burst command |
Max Packet Burst |
The maximum number of RSVP-TE messages that are sent under normal operating conditions in the period specified |
Refresh Bypass |
Enabled — the refresh-reduction-over-bypass command is enabled |
Disabled — the refresh-reduction-over-bypass command is disabled |
|
Rapid Retransmit |
The time interval for the rapid retransmission time, which is used in the retransmission mechanism that handles unacknowledged message_id objects (the units ‟hmsec” represent hundreds of msec; for example, 5 hmsec represents 500 msec) |
Rapid Retry Limit |
The value of the rapid retry limit, which is used in the retransmission mechanism that handles unacknowledged message_id objects |
Graceful Shutdown |
Specifies whether graceful shutdown of the RSVP node is enabled |