The following command outputs are examples only; actual displays may differ depending on supported functionality and user configuration.
detail
show>router>pcep>pcc
This command displays PCEP PCC detailed information.
The following output is an example of PCEP PCC detailed information, and Table: PCEP PCC Field Descriptions describes the fields.
Output Example*A:Sar18 Dut-B>show>router>pcep# pcc detail
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Down Oper Status : Down
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 50 seconds DeadTimer Interval : 150 seconds
Capabilities List : stateful-delegate stateful-pce rsvp-path
Address : 10.10.10.10
Report Path Constraints: True
Open Wait Timer : 60 seconds Keep Wait Timer : 60 seconds
Sync Timer : 60 seconds Request Timer : 120 seconds
Connection Timer : 60 seconds Allow Negotiations : False
Max Sessions : 1 Max Unknown Req : 1000
===============================================================================
*A:Sar18 Dut-B>show>router>pcep#
|
Label |
Description |
|---|---|
|
Admin Status |
The administrative status of the PCC |
|
Oper Status |
The operational status of the PCC |
|
Unknown Msg Limit |
The maximum rate of unknown messages that can be received on a PCEP session |
|
Keepalive Interval |
The specified keepalive interval for the PCEP session |
|
DeadTimer Interval |
The specified dead time interval for the PCEP session |
|
Capabilities List |
The capabilities list for the PCEP session |
|
Address |
The local IP address of the PCEP speaker |
|
Report Path Constraints |
Indicates whether to include LSP path constraints in the PCE report messages sent from the PCC to a PCE |
|
Open Wait Timer |
The value of the open wait timer for the PCEP session |
|
Keep Wait Timer |
The value of the keep wait timer for the PCEP session |
|
Sync Timer |
The value of the synchronization timer for the PCEP session |
|
Request Timer |
The value of the request timer for the PCEP session |
|
Connection Timer |
The value of the keep wait timer for the PCEP session |
|
Allow Negotiations |
Indicates where negotiations between PCEP PCC and PCE are allowed |
|
Max Sessions |
The maximum number of PCEP sessions on the router |
|
Max Unknown Req |
The maximum number of unknown requests for PCEP sessions on the router |
lsp-db [lsp-type lsp-type] [delegated-pce ip-address]
lsp-db [lsp-type lsp-type] from ip-address [delegated-pce ip-address]
lsp-db [lsp-type lsp-type] lsp lsp-name [delegated-pce ip-address]
lsp-db [lsp-type lsp-type] to ip-address [tunnel-id [tunnel-id]]
lsp-db [lsp-type lsp-type] tunnel-id [tunnel-id]
show>router>pcep>pcc
This command displays PCEP PCC LSP information.
specifies the type of LSP to display. The only available option is RSVP-TE point-to-point LSPs (rsvp-p2p).
specifies a tunnel ID
specifies an IPv4 address
The following output is an example of PCEP PCC LSP information.
Output Example*A:7705:Dut-C# show router pcep pcc lsp-db
===============================================================================
PCEP Path Computation Client (PCC) LSP Update Info
===============================================================================
PCEP-specific LSP ID: 1
LSP ID : 21504 LSP Type : rsvp-p2p
Tunnel ID : 1 Extended Tunnel Id : 10.20.1.3
LSP Name : test_lsp::fully_loose
Source Address : 10.20.1.3 Destination Address : 10.20.1.1
LSP Delegated : True Delegate PCE Address: 192.120.210.36
Oper Status : active
-------------------------------------------------------------------------------
PCEP-specific LSP ID: 2
LSP ID : 21510 LSP Type : rsvp-p2p
Tunnel ID : 1 Extended Tunnel Id : 10.20.1.3
LSP Name : test_lsp::stdby_fully_loose_2
Source Address : 10.20.1.3 Destination Address : 10.20.1.1
LSP Delegated : True Delegate PCE Address: 192.120.210.36
Oper Status : up
===============================================================================
*A:7705:Dut-C#
path-request [lsp-type {rsvp-p2p}] [dest ip-address] [detail]
show>router>pcep>pcc
This command displays PCEP PCC path request information.
specifies the type of LSP to display. The only available option is RSVP-TE point-to-point LSPs.
specifies the destination IPv4 address to display
displays detailed path request information
The following output is an example of PCEP PCC path request information.
Output Example*A:7705:Dut-C# show router pcep pcc path-request
===============================================================================
PCEP Path Computation Client (PCC) Path Computation Request (PCReq) Info
===============================================================================
Request ID : 4 Message State : sent-for-compute
Tunnel ID : 2 Extended Tunnel Id : 10.20.1.3
LSP ID : 62468 LSP Type : rsvp-p2p
LSP Name : test_lsp::fully_loose
Source Address : 10.20.1.3 Destination Address: 10.20.1.1
SVEC Id : 4 LSP Bandwidth : 0
===============================================================================
peer [ip-address] [detail]
show>router>pcep>pcc
This command displays PCEP PCC peer information.
specifies a peer IPv4 address to display
displays detailed peer information
The following output is an example of a PCEP PCC peer information, and Table: PCEP PCC Peer Field Descriptions describes the fields.
Output Example*A:Sar18 Dut-B>show>router>pcep>pcc# peer detail
===============================================================================
PCEP Path Computation Client (PCC) Peer Info
===============================================================================
IP Address : 10.10.10.11
Admin Status : Down Oper Status : Down
Peer Capabilities : (Not Specified)
Speaker ID : (Undefined)
Sync State : not-initialized Peer Overloaded : False
Session Establish Time: 0d 00:00:00
Oper Keepalive : N/A Oper DeadTimer : N/A
Session Setup Count : 0 Session Setup Fail Count: 0
-------------------------------------------------------------------------------
Statistics Information
-------------------------------------------------------------------------------
Sent Received
-------------------------------------------------------------------------------
PC Request Message 0 0
PC Reply Message 0 0
PC Error Message 0 0
PC Notification Message 0 0
PC Keepalive Message 0 0
PC Update Message 0 0
PC Report Message 0 0
Path Report 0 0
Path Request 0 0
-------------------------------------------------------------------------------
===============================================================================
*A:Sar18 Dut-B>show>router>pcep>pcc#
|
Label |
Description |
|---|---|
|
IP Address |
The IP address of the PCC peer |
|
Admin Status |
The administrative status of the PCC peer |
|
Oper Status |
The operational status of the PCC peer |
|
Peer Capabilities |
The PCEP capabilities of the PCC peer |
|
Speaker ID |
The IP address of the PCC peer speaker |
|
Sync State |
The synchronization state of the |
|
Peer Overloaded |
Indicates whether the PCC peer is overloaded |
|
Session Establish Time |
The length of time since the PCEP session was established |
|
Oper Keepalive |
The operational value for the PCC peer keepalive timer |
|
Oper DeadTimer |
The operational value for the PCC peer dead timer |
|
Session Setup Count |
The number of times that the PCEP session has been set up |
|
Session Setup Fail Count |
The number of times that the PCEP session failed to be set up |
|
Statistics Information |
|
|
PC Request Message |
The number of path computation (PC) request messages sent the PCC peer and received from the PCC peer |
|
PC Reply Message |
The number of PC reply messages sent to the PCC peer and received from the PCC peer |
|
PC Error Message |
The number of PC error messages sent to the PCC peer and received from the PCC peer |
|
PC Notification Message |
The number of PC notification messages sent to the PCC peer and received from the PCC peer |
|
PC Keepalive Message |
The number of PC keepalive messages sent to the PCC peer and received from the PCC peer |
|
PC Update Message |
The number of PC update messages sent to the PCC peer and received from the PCC peer |
|
PC Report Message |
The number of PC report messages sent to the PCC peer and received from the PCC peer |
|
Path Report |
The number of path reports sent to the PCC peer and received from the PCC peer |
|
Path Request |
The path requests sent to the PCC peer and received from the PCC peer |
status
show>router>pcep>pcc
This command displays PCEP PCC status information.
The following output is an example of a PCEP PCC status information, and Table: PCEP PCC Status Field Descriptions describes the fields.
Output Example*A:Sar18 Dut-B>show>router>pcep>pcc# status
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Down Oper Status : Down
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 50 seconds DeadTimer Interval : 150 seconds
Capabilities List : stateful-delegate stateful-pce rsvp-path
Address : 10.10.10.10
Report Path Constraints: True
-------------------------------------------------------------------------------
PCEP Path Computation Client (PCC) Peer Info
-------------------------------------------------------------------------------
Peer Admin State/Oper State Oper Keepalive/Oper DeadTimer
-------------------------------------------------------------------------------
10.10.10.11 Down/Down Not-Applicable/Not-Applicable
-------------------------------------------------------------------------------
===============================================================================
*A:Sar18 Dut-B>show>router>pcep>pcc#
|
Label |
Description |
|---|---|
|
Admin Status |
The administrative status of the PCC |
|
Oper Status |
The operational status of the PCC |
|
Unknown Msg Limit |
The maximum rate of unknown messages that can be received on a PCEP session |
|
Keepalive Interval |
The specified keepalive interval for the PCEP session |
|
DeadTimer Interval |
The specified dead time interval for the PCEP session |
|
Capabilities List |
The capabilities list for the PCEP session |
|
Address |
The local IP address of the PCEP speaker |
|
Report Path Constraints |
Indicates whether to include LSP path constraints in the PCE report messages sent from the PCC to a PCE |
|
PCEP Path Computation Client (PCC) Peer Info |
|
|
Peer |
The IP address of the PCC peer |
|
Admin State/Oper State |
The administrative and operational states of the PCC peer |
|
Oper Keepalive/Oper DeadTimer |
The operational keepalive and dead timer intervals of the PCC peer |