[no] fc fc-name [create]
config>qos>network-queue
The fc is created with default unicast queue-id 1 and default multicast queue-id 9 automatically configured. The specified queues contain the PIR, CIR, CBS, and MBS configurations.
Use the multicast-queue and queue commands to change the fc queue-id assignments from their default queue assignments.
The no form of this command restores the default queue.
the forwarding class name for which the contained PIR, CIR, CBS, and MBS queue attributes apply. An instance of fc is allowed for each fc-name.
keyword used to create a forwarding class policy
multicast-queue queue-id
no multicast-queue
config>qos>network-queue>fc
This command overrides the default multicast forwarding type queue mapping for fc fc-name. The specified queue-id must exist within the policy as a multipoint queue before the mapping can be made. Once the forwarding class mapping is executed, all multicast traffic at network ingress using this policy is forwarded using the queue-id. Use the queue queue-id multipoint command to create the specified queue-id.
The multicast forwarding type includes the unknown forwarding type and the broadcast forwarding type unless each is explicitly assigned to a different multipoint queue. When the unknown and broadcast forwarding types are left as default, they will track the defined queue for the multicast forwarding type.
The no form of the command sets the multicast forwarding type queue-id back to the default queue (queue 9).
an existing multipoint queue defined in the config>qos>network-queue context.
queue queue-id
no queue
config>qos>network-queue>fc
This command enables the context to configure forwarding-class-to-queue mappings.
The no form of this command removes the queue-id from the network-queue policy and from any existing network ingress or network egress ports using the policy, and sets the queue-id back to the default queue (queue 1).
the queue identifier for the queue, expressed as an integer. The queue-id uniquely identifies the queue within the policy. This is a required parameter each time the queue command is executed.