The following output shows the service ingress policy defaults.
ALU-1>config>qos>info detail
#--------------------------------------------------
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
...
sap-ingress 1 create
policy-name "default"
description "Default SAP ingress QoS policy."
scope template
queue 1 priority-mode auto-expedite create
adaptation-rule pir closest cir closest
rate max cir 0
mbs default
cbs default
high-prio-only default
slope-policy "default"
exit
default-fc "be"
default-priority low
exit
...
#--------------------------------------------------
Table: Service Ingress Policy Defaults lists the service ingress policy defaults.
Field |
Default |
|---|---|
policy-name |
‟default” |
description |
Default SAP ingress QoS policy |
scope |
template |
queue |
id = 1, mode = priority-mode, type = auto-expedite |
adaptation-rule |
pir = closest, cir = closest |
rate |
pir = max, cir = 0 |
cbs |
default (8 kbytes for 512 byte buffer size, 18 kbytes for 2304 byte buffer size) |
mbs |
default (180 kbytes) |
high-prio-only |
default (10%) |
slope-policy |
default |
default-fc |
be |
default-priority |
low |