fabric-profile [policy-id] [association | detail]
show>qos
This command displays QoS fabric profile information. If policy-id is not included in the command, the CLI shows a list of fabric policies.
specifies the QoS fabric profile
displays all adapter cards to which the specified profile is assigned and in which direction; that is, network ingress to fabric or access ingress to fabric
displays detailed policy information including policy associations
The following output is an example of QoS fabric profile information, and Table: QoS Fabric Profile Field Descriptions describes the fields.
Output Example*A:ALU-1>show>qos# fabric-profile
=====================================================================
Fabric Profile
=====================================================================
Policy-Id Mode Description
---------------------------------------------------------------------
1 aggregate Default Fabric Profile QoS policy.
2 aggregate Fast Shaping fabric profile policy.
100 destination
=====================================================================
*A:ALU-1>show>qos# fabric-profile
*A:ALU-1>show>qos# fabric-profile 4 detail
===============================================================================
QoS Fabric Profile
===============================================================================
-------------------------------------------------------------------------------
Fabric Profile Id (4)
-------------------------------------------------------------------------------
Policy-id : 4
Mode : destination
Description : Fabric profile QoS policy 4
-------------------------------------------------------------------------------
Destination MDA Rate (Kbps)
-------------------------------------------------------------------------------
1/1 400000
1/2 400000
1/3 400000
1/4 400000
1/5 400000
1/6 400000
multipoint 400000
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
MDA : 1/1 (Network Ingress)
MDA : 1/1 (Access Ingress)
MDA : 1/2 (Network Ingress)
MDA : 1/2 (Access Ingress)
MDA : 1/3 (Network Ingress)
MDA : 1/3 (Access Ingress)
MDA : 1/4 (Network Ingress)
MDA : 1/4 (Access Ingress)
MDA : 1/5 (Network Ingress)
MDA : 1/5 (Access Ingress)
MDA : 1/6 (Network Ingress)
MDA : 1/6 (Access Ingress)
===============================================================================
*A:ALU-1>show>qos#
*A:ALU-1>show>qos# fabric-profile 2 detail
===============================================================================
QoS Fabric Profile
===============================================================================
-------------------------------------------------------------------------------
Fabric Profile Id (2)
-------------------------------------------------------------------------------
Policy-id : 2
Mode : aggregate
Description : Fast Shaping fabric profile policy
Aggregate-rate : 200 Kbps
Unshaped-sap-cir : 200 Kbps
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
MDA : 1/1 (Network Ingress)
MDA : 1/1 (Access Ingress)
MDA : 1/2 (Network Ingress)
MDA : 1/2 (Access Ingress)
MDA : 1/3 (Network Ingress)
MDA : 1/3 (Access Ingress)
MDA : 1/4 (Network Ingress)
MDA : 1/4 (Access Ingress)
MDA : 1/5 (Network Ingress)
MDA : 1/5 (Access Ingress)
MDA : 1/6 (Network Ingress)
MDA : 1/6 (Access Ingress)
===============================================================================
Label |
Description |
|---|---|
Policy-id |
The fabric profile QoS policy number |
Mode |
The fabric profile mode, either aggregate or destination |
Description |
The description associated with the fabric profile |
Aggregate-rate |
The rate of the fabric shapers in aggregate mode, in kb/s |
Unshaped-sap-cir |
The CIR rate of the aggregate SAP shaper for all unshaped 4-priority SAPs, in kb/s |
Destination MDA/Rate (Kbps) |
The slot/mda number of the destination adapter card, and the rate of the fabric shapers in per-destination mode, in kb/s |
Associations |
The adapter cards to which the specified fabric profile is assigned and in which direction, that is, network ingress to fabric or access ingress to fabric |
qos
show>system
This command displays system QoS information for the 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-M, and 7705 SAR-Wx.
This command is not supported on the 7705 SAR-X.
The following output is an example of system QoS information, and Table: QoS Fabric Profile Field Descriptions describes the fields.
Output Example*A:ALU-1>show>system# qos
========================================================================
System QOS Configuration
========================================================================
Access Ingress Aggregate Rate : 1234 Kbps
Access Ingress Unshaped Sap CIR : 123 Kbps
Network Ingress Aggregate Rate : 456 Kbps
========================================================================
*A:ALU-1>show>system# qos
Label |
Description |
|---|---|
Access Ingress Aggregate Rate |
The rate of the access ingress fabric shapers in aggregate mode, in kb/s |
Access Ingress Unshaped Sap CIR |
The CIR rate of the access ingress unshaped SAP shapers in aggregate mode, in kb/s |
Network Ingress Aggregate Rate |
The rate of the network ingress fabric shapers in aggregate mode, in kb/s |