sap-egress [policy-id] [standard | mc-mlppp] [association | match-criteria | detail]
sap-egress summary
show>qos
This command displays service egress and MC-MLPPP SAP egress QoS policy information.
displays information about the specific policy ID
displays all standard SAP egress QoS policies
displays only MC-MLPPP SAP egress policy information
displays policy associations
displays match criteria
displays detailed policy information including policy associations
displays a summary of the number of SAP egress policies
The following output is an example of service egress and MC-MLPPP SAP egress QoS policy information, and Table: SAP Egress Field Descriptions describes the fields.
Output Example*A:ALU-1# show qos sap-egress
===============================================================================
Sap Egress Policies
===============================================================================
Policy-Id Type Scope Name Description
-----------------------------------------------------------------------------
1 Default Template default Default SAP egress QoS policy.
200 Standard Template SAP Egress Policy 200
300 MC-MLPPP Template SAP Egress Policy 300
400 Standard Exclusive Egress Policy 400
500 Standard Template Egress Policy 500
550 MC-MLPPP Template New Multi-class type policy
600 Standard Exclusive
-------------------------------------------------------------------------------
Number of Policies : 7
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-1#
*A:Sar18 Dut-B>show>qos# sap-egress summary
===============================================================================
Sap Egress Summary
===============================================================================
Number of Policies : 7
Active Policies : 6
Inactive Policies : 1
===============================================================================
*A:Sar18 Dut-B>show>qos#
*A:ALU-1# show qos sap-egress 500 detail
===============================================================================
QoS Sap Egress
===============================================================================
-------------------------------------------------------------------------------
Standard Sap Egress Policy (500)
-------------------------------------------------------------------------------
Policy-id : 500 Scope : Template
Name : sap_egress_policy_500
Description : Egress Policy 500
Pkt.Byte Offset: add 0
Policy Active : False
-------------------------------------------------------------------------------
Queue Information
-------------------------------------------------------------------------------
Queue-Id : 1 Queue-Type : auto-expedite
Admin PIR : max Admin CIR : 0
PIR Rule : closest CIR Rule : closest
CBS : Def MBS : Def
Slope Policy : default Packet Byte Offset : def
High Priority : def
Queue-Id : 4 Queue-Type : auto-expedite
Admin PIR : max Admin CIR : 0
PIR Rule : closest CIR Rule : closest
CBS : 2 KB MBS : Def
Slope Policy : default Packet Byte Offset : def
High Priority : def
-------------------------------------------------------------------------------
FC Queue Dot1p Exp/Def DSCP Marking
-------------------------------------------------------------------------------
be def Default default
ef def Default DSCP In:cp2 Out:cp3
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No Associations Found.
===============================================================================
*A:ALU-1#
*A:7705:Dut-C# show qos sap-egress mc-mlppp 550 detail
===============================================================================
QoS Sap Egress
===============================================================================
-------------------------------------------------------------------------------
MC-MLPPP Sap Egress Policy (550)
-------------------------------------------------------------------------------
Policy-id : 550 Scope : Template
Name : (Not Specified)
Description : New Multi-class type policy
Pkt.Byte Offset: default
Policy Active : False
-------------------------------------------------------------------------------
Queue Information
-------------------------------------------------------------------------------
Queue-Id : 1 Queue-Type : auto-expedite
Admin PIR : max
PIR Rule : closest
CBS : Def MBS : Def
Slope Policy : default
High Priority : def
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
FC Name Queue-id DSCP Marking
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No Associations Found.
Label |
Description |
|---|---|
Summary |
|
Number of Policies |
The number of SAP egress policies |
Active Policies |
The number of active SAP egress policies |
Inactive Policies |
The number of inactive SAP egress policies |
QoS Sap Egress Policy |
|
Policy-Id |
The ID that uniquely identifies the policy |
Type |
Indicates the type of SAP egress policy; Default, Standard, or MC-MLPPP |
Scope |
Exclusive - this policy can only be applied to a single SAP |
Template - this policy can be applied to multiple SAPs on the router |
|
Name |
The policy name |
Description |
A text string that helps identify the policy’s context in the configuration file |
Pkt.Byte Offset |
Indicates the value of the packet byte offset applied to the packet for scheduling, if applicable. A value of ‟default” indicates that legacy mode packet scheduling is in use, in which packets are scheduled based on size including internal overhead. |
Policy Active |
Indicates whether the policy is active or inactive |
Queue Information |
|
Queue-Id |
The ID that identifies the queue |
Queue-Type |
The queue type: auto-expedite, expedite, or best-effort |
Admin PIR |
The administrative Peak Information Rate (PIR) parameters for the queue. The PIR defines the maximum rate that the queue can transmit packets out an egress interface. |
Admin CIR |
The administrative Committed Information Rate (CIR) parameters for the queue. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. |
PIR Rule |
min - the operational PIR for the queue will be equal to or greater than the administrative rate specified using the rate command |
max - the operational PIR for the queue will be equal to or less than the administrative rate specified using the rate command |
|
closest - the operational PIR for the queue will be the rate closest to the rate specified using the rate command |
|
CIR Rule |
min - the operational CIR for the queue will be equal to or greater than the administrative rate specified using the rate command except where the derived operational CIR is greater than the operational PIR. If the derived operational CIR is greater than the derived operational PIR, the operational CIR will be made equal to the operational PIR. |
max - the operational CIR for the queue will be equal to or less than the administrative rate specified using the rate command |
|
closest - the operational CIR for the queue will be the rate closest to the rate specified using the rate command without exceeding the operational PIR |
|
CBS |
def - the CBS value reserved for the queue |
value - the value to override the default reserved buffers for the queue |
|
MBS |
def - the MBS value reserved for the queue |
value - the value to override the default maximum size for the queue |
|
Slope Policy |
The slope policy for the queue |
Packet Byte Offset |
The value of the packet byte offset applied to the queue. A value of ‟default” indicates that legacy mode packet scheduling is in use, in which packets are scheduled based on size including internal overhead. |
High Priority |
The percentage of buffer space for the queue, used exclusively by high-priority packets |
FC Mapping Information |
|
FC |
The forwarding class |
Queue |
The queue ID that uniquely identifies the queue within the policy |
Dot1p Exp/Def (Explicit/Default) |
The egress dot1p bits used for the FC-to-dot1p mapping: Explicit (an egress dot1p bit is configured for the FC-to-egress-dot1p bit mapping) or Default |
DSCP Marking |
The DSCP name and DSCP priority bits mapping for the forwarding class |
Associations |
|
Associations |
Service Name - the name of the service |
Service-Id - the unique service ID number that identifies the service in the service domain |
|
Customer-Id - the customer ID that identifies the customer to the service |
|
SAP - the Service Access Point within the service where the policy is applied |
|
sap-ingress [policy-id] [association | match-criteria | detail]
sap-ingress summary
show>qos
This command displays service ingress QoS policy information.
displays information about the specific policy
displays policy associations
displays match criteria
displays detailed policy information including policy associations
displays a summary of the number of SAP ingress policies
The following output is an example of service ingress QoS policy information, and Table: SAP Ingress Field Descriptions describes the fields.
Output ExampleA:ALU-1# show qos sap-ingress
===============================================================================
Sap Ingress Policies
===============================================================================
Policy-Id Scope Name Description
-------------------------------------------------------------------------------
1 Template default Default SAP ingress QoS policy.
100 Template Used on VPN SAP
===============================================================================
Number of Policies : 2
===============================================================================
*A:ALU-1#
*A:Sar18 Dut-B>show>qos# sap-ingress summary
===============================================================================
Sap Ingress Summary
===============================================================================
Number of Policies : 2
Active Policies : 1
Inactive Policies : 1
===============================================================================
*A:Sar18 Dut-B>show>qos#
A:ALU-1# show qos sap-ingress 1 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Default FC : be Priority : Low
Name : default
Description : Default SAP ingress QoS policy.
Pkt.Byte Offset: default
Policy Active : True
-------------------------------------------------------------------------------
Q Mode CIR Admin PIR Admin CBS HiPrio Packet Slope-Policy
CIR Rule PIR Rule MBS Offset
-------------------------------------------------------------------------------
1 Prio 0 max def def default default
closest closest def
-------------------------------------------------------------------------------
FC UCastQ MCastQ BCastQ UnknownQ
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
FC DE-1-out-profile Profile
------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Dot1p FC Priority
-------------------------------------------------------------------------------
No Dot1p-Map Entries Found.
-------------------------------------------------------------------------------
DSCP FC Priority
-------------------------------------------------------------------------------
No DSCP-Map Entries Found.
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Service-Name : epipe1
Service-Id : 1 (Epipe) Customer-Id : 1
- SAP : 1/1/2
- SAP : 1/12/3:100.100
Service-Id : 4 (Cpipe) Customer-Id : 1
- SAP : 1/2/1.1
Service-Id : 5 (IES) Customer-Id : 1
- SAP : 1/10/4
Service-Name : VPRN21_hybrid
Service-Id : 21 (VPRN) Customer-Id : 1
- SAP : 1/7/6
===============================================================================
*A:7705custDoc:Sar18#
*A:7705:Dut-A# show qos sap-ingress 2 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (2)
-------------------------------------------------------------------------------
Policy-id : 2 Scope : Template
Default FC : be Priority : Low
Name : (Not Specified)
Description : (Not Specified)
Pkt.Byte Offset: default
Policy Active : True
-------------------------------------------------------------------------------
Q Mode CIR Admin PIR Admin CBS HiPrio Packet Slope-Policy
CIR Rule PIR Rule MBS Offset
-------------------------------------------------------------------------------
1 Prio 0 max def def def default
closest closest def
2 Prio 0 max def def def default
closest closest def
3 Profile 0 max def def def default
closest closest def
-------------------------------------------------------------------------------
FC UCastQ MCastQ BCastQ UnknownQ
-------------------------------------------------------------------------------
nc 3 def def def
-------------------------------------------------------------------------------
FC DE-1-out-profile Profile
-------------------------------------------------------------------------------
nc No In
-------------------------------------------------------------------------------
Dot1p FC Priority
-------------------------------------------------------------------------------
No Dot1p-Map Entries Found.
-------------------------------------------------------------------------------
DSCP FC Priority
-------------------------------------------------------------------------------
No DSCP-Map Entries Found.
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Service-Name : XYZ Epipe 1301
Service-Id : 1301 (Epipe) Customer-Id : 1
- SAP : 1/2/8:1
===============================================================================
A:ALU-1# show qos sap-ingress 100 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (100)
-------------------------------------------------------------------------------
Policy-id : 100 Scope : Template
Default FC : be Priority : Low
Name : (Not Specified)
Description : Used on VPN SAP
Pkt.Byte Offset: default
Policy Active : True
-------------------------------------------------------------------------------
Q Mode CIR Admin PIR Admin CBS HiPrio Packet Slope-Policy
CIR Rule PIR Rule MBS Offset
-------------------------------------------------------------------------------
1 Prio 0 max def def default default
closest closest def
2 Prio 25000 2500 1500 10 default default
closest closest 10
-------------------------------------------------------------------------------
FC UCastQ MCastQ BCastQ UnknownQ
-------------------------------------------------------------------------------
h2 def def def def
ef 2 def def def
h1 2 def def def
-------------------------------------------------------------------------------
FC DE-1-out-profile Profile
------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Dot1p FC Priority
-------------------------------------------------------------------------------
1 be Low
-------------------------------------------------------------------------------
DSCP FC Priority
-------------------------------------------------------------------------------
be be Low
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No Associations Found.
===============================================================================
*A:ALU-1#
Label |
Description |
|---|---|
Summary |
|
Number of Policies |
The number of SAP ingress policies |
Active Policies |
The number of active SAP ingress policies |
Inactive Policies |
The number of inactive SAP ingress policies |
QoS Sap Ingress Policy |
|
Policy-Id |
The ID that uniquely identifies the policy |
Scope |
Exclusive - this policy can only be applied to a single SAP |
Template - this policy can be applied to multiple SAPs on the router |
|
Default FC |
The default forwarding class for the policy |
Priority |
The default enqueuing priority |
Name |
The policy name |
Description |
A text string that helps identify the policy’s context in the configuration file |
Pkt.Byte Offset |
Indicates the value of the packet byte offset applied to the packet for scheduling, if applicable. A value of ‟default” indicates that legacy mode packet scheduling is in use, in which packets are scheduled based on size including internal overhead. |
Policy Active |
Indicates whether the policy is active or inactive |
Queue Information |
|
Q |
The queue number |
Mode |
The mode for the queue, either priority mode or profile mode |
CIR Admin |
The CIR parameters for the queue. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. |
CIR Rule |
min - the operational CIR for the queue will be equal to or greater than the administrative rate specified using the rate command except where the derived operational CIR is greater than the operational PIR. If the derived operational CIR is greater than the derived operational PIR, the operational CIR will be made equal to the operational PIR. |
max - the operational CIR for the queue will be equal to or less than the administrative rate specified using the rate command |
|
closest - the operational CIR for the queue will be the rate closest to the rate specified using the rate command without exceeding the operational PIR |
|
PIR Admin |
The administrative PIR parameters for the queue. The PIR defines the maximum rate that the queue can transmit packets through the switch fabric. |
PIR Rule |
min - the operational PIR for the queue will be equal to or greater than the administrative rate specified using the rate command |
max - the operational PIR for the queue will be equal to or less than the administrative rate specified using the rate command |
|
closest - the operational PIR for the queue will be the rate closest to the rate specified using the rate command |
|
CBS |
def - the CBS value reserved for the queue |
value - the value to override the default reserved buffers for the queue |
|
MBS |
def - the MBS value reserved for the queue |
value - the value to override the default maximum size for the queue |
|
HiPrio |
The percentage of buffer space for the queue, used exclusively by high-priority packets |
Packet Offset |
The value of the packet byte offset applied to the queue. A value of ‟default” indicates that legacy mode packet scheduling is in use, in which packets are scheduled based on size including internal overhead. |
Slope-Policy |
The slope policy for the queue |
Forwarding Class Information |
|
UCastQ |
The unicast forwarding type queue mapping (default or queue number) |
MCastQ |
The multicast forwarding type queue mapping (default or queue number) |
BCastQ |
The broadcast forwarding type queue mapping (default or queue number) |
UnknownQ |
The unknown unicast forwarding type queue mapping (default or queue number) |
Profile |
The in-profile or out-of-profile state for packets assigned to this forwarding class |
FC DE-1-out-profile Information |
|
DE-1-out-profile |
When enabled on a Frame Relay VLL, DE-1 frames are classified as out-of-profile and are not subject to the CIR marking |
Dot1p Information |
|
Dot1p |
The forwarding class and/or enqueuing priority when a packet is marked with a dot1p-value specified |
FC |
The specified forwarding class used for the dot1p-to-FC mapping when a packet matches the dot1p rule. If no FC is specified, the default FC is used. |
Priority |
The optional priority setting overrides the default enqueuing priority for the packets received on an ingress SAP that uses the policy that matches this rule. The FC priority setting only applies to an FC that maps to a priority mode queue. |
High - the high enqueuing parameter for a packet increases the likelihood of enqueuing the packet when the ingress queue is congested. This parameter only applies to an FC that maps to a priority mode queue. |
|
Low - the low enqueuing parameter for a packet decreases the likelihood of enqueuing the packet when the ingress queue is congested. This parameter only applies to an FC that maps to a priority mode queue. |
|
DSCP Information |
|
DSCP |
The forwarding class and/or enqueuing priority when a packet is marked with the DiffServ Code Point (DSCP) value. |
FC |
The specified forwarding class used for the DSCP-to-FC mapping when a packet matches the DSCP rule. If no FC is specified, the default FC is used. |
Priority |
The default enqueuing priority overrides for all packets received on an ingress SAP using this policy that match this rule. The FC priority setting only applies to an FC that maps to a priority mode queue. |
High - the high enqueuing parameter for a packet increases the likelihood of enqueuing the packet when the ingress queue is congested. This parameter only applies to an FC that maps to a priority mode queue. |
|
Low - the low enqueuing parameter for a packet decreases the likelihood of enqueuing the packet when the ingress queue is congested. This parameter only applies to an FC that maps to a priority mode queue. |
|
Associations |
|
Associations |
Service Name - the name of the service |
Service-Id - the unique service ID number that identifies the service in the service domain |
|
Customer-Id - the customer ID that identifies the customer to the service |
|
SAP - the SAP within the service where the service ingress policy is applied |
|
pools mda mda-id [detail]
pools mda mda-id [egress l ingress] [ring | v-port] [detail]
show
This command displays buffer pool information on an adapter card. This information pertains to the memory allocation that is used for queuing purposes. The information is displayed according to the number of allocated buffers.
Since the 10-port 1GigE/1-port 10GigE X-Adapter card has separate ingress and egress buffer pools, there are two sets of pool information displayed for the card. Use the egress keyword to display only egress buffer pool information; use the ingress keyword to display only ingress buffer pool information; use the mda keyword by itself to display both egress buffer pool information and ingress buffer pool information.
All adapter cards allocate a fixed-size space for each buffer. The 7705 SAR supports two buffer sizes: 2304 and 512 bytes, depending on the type of adapter card. See Table: Buffer Support on Adapter Cards and Platforms for a list of adapter cards and their associated buffers.
A buffer size of 2304 bytes is large enough to accommodate the maximum frame size supported on the non-buffer-chaining adapter cards on the 7705 SAR. The adapter cards that support a buffer size of 2304 bytes always have a 1-to-1 correspondence of packets to buffers.
A buffer size of 512 bytes is smaller than the largest frame size supported on the 7705 SAR. Packets that are larger than 512 bytes use more than one buffer. The adapter cards that support a buffer size of 512 bytes dynamically divide packets that are larger than 512 bytes into a series of concatenated buffers in a method called buffer chaining. See Buffer Unit Allocation and Buffer Chaining for more information.
Adapter cards that support byte-based WRED use 512-byte buffers and can have a many-to-1 correspondence of packets to buffers. For example, assuming 128-byte packets, to fill 512 bytes in a queue takes four buffers using payload-based WRED (also called byte-based WRED), compared to one buffer in buffer-based WRED. When using byte-based WRED for frame sizes smaller than 512 bytes (128 or 256 bytes), the actual number of buffers used in the queue may exceed the MBS configured for the queue, since byte-based WRED does not count buffer overhead (filler) bytes in the queue to determine packet discard or tail drop eligibility, as is the case for buffer-based WRED. See Payload-based WRED for more information.
the location of the adapter card (in the form slot/card)
displays buffer pool information on the adapter card
displays detailed buffer pool information on the adapter card
displays only egress buffer pool information on the 10-port 1GigE/1-port 10GigE X-Adapter card
displays only detailed egress buffer pool information on the 10-port 1GigE/1-port 10GigE X-Adapter card
displays only ingress buffer pool information on the 10-port 1GigE/1-port 10GigE X-Adapter card
displays only detailed ingress buffer pool information on the 10-port 1GigE/1-port 10GigE X-Adapter card
displays only ring buffer pool information on the 2-port 10GigE (Ethernet) Adapter card and 2-port 10GigE (Ethernet) module
displays only v-port buffer pool information on the 2-port 10GigE (Ethernet) Adapter card and 2-port 10GigE (Ethernet) module
The following outputs are examples of detailed buffer pool information for an 8-port Gigabit Ethernet Adapter card, a 32-port T1/E1 ASAP Adapter card, a 10-port 1GigE/1-port 10GigE X-Adapter card, and a 2-port 10GigE (Ethernet) Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
Output Example (Summary, 8-port Gigabit Ethernet Adapter Card with a 512-byte Buffer)
Output Example (Summary, 32-port T1/E1 ASAP Adapter Card with a 2304-byte Buffer)
The following outputs are examples of ingress and egress buffer pool information for a 10-port 1GigE/1-port 10GigE X-Adapter card, and v-port and ring buffer pool information on the 2-port 10GigE (Ethernet) Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
Output Example (Summary, 10-port 1GigE/1-port 10GigE X-Adapter Card)
Output Example (Summary, Egress, 10-port 1GigE/1-port 10GigE X-Adapter Card)
Output Example (Detailed, Egress, 10-port 1GigE/1-port 10GigE X-Adapter Card)
Output Example (Summary, Ingress, 10-port 1GigE/1-port 10GigE X-Adapter Card)
Output Example (Detailed, Ingress, 10-port 1GigE/1-port 10GigE X-Adapter Card)
The following output is an example of buffer pool information for an 8-port Gigabit Ethernet Adapter card. Outputs for the 6-port Ethernet 10Gbps Adapter card are similar. The buffer size (512 bytes) is used by all Ethernet adapter cards. Table: Buffer Pool Field Descriptions describes the fields.
*A:ALU-1# show pools mda 1/1 detail
===============================================================================
Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 387383 buffers Pool Resv : 136904 buffers
Pool Total In Use : 62 buffers
Pool Exhaustion Drop : 0
===============================================================================
===============================================================
Access Ingress Queues
===============================================================
---------------------------------------------------------------
Name FC-Maps O.MBS(buf) Depth(buf)
O.CBS(buf)
---------------------------------------------------------------
1->1/1/1:10->1
be l2 af l1 351 1
h2 ef h1 nc 16
1->1/1/1:20->1
be l2 af l1 351 1
h2 ef h1 nc 16
===============================================================
===============================================================
Access Egress Queues
===============================================================
---------------------------------------------------------------
Name FC-Maps O.MBS(buf) Depth(buf)
O.CBS(buf)
---------------------------------------------------------------
1->1/1/1:10->1
be l2 af l1 351 1
h2 ef h1 nc 16
1->1/1/1:20->1
be l2 af l1 351 1
h2 ef h1 nc 16
===============================================================
=============================================================
Network Ingress Queues
=============================================================
-------------------------------------------------------------
FC-Maps Dest O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
be 1/1 26214 0
528
l2 1/1 26214 0
1312
af 1/1 26214 0
3936
l1 1/1 13107 0
1312
h2 1/1 26214 0
3936
ef 1/1 26214 0
3936
h1 1/1 13107 0
1312
nc 1/1 13107 0
1312
be 1/2 26214 0
528
l2 1/2 26214 0
1312
af 1/2 26214 0
3936
l1 1/2 13107 0
1312
h2 1/2 26214 0
3936
ef 1/2 26214 0
3936
h1 1/2 13107 0
1312
nc 1/2 13107 0
1312
be 1/3 26214 0
528
l2 1/3 26214 0
1312
af 1/3 26214 0
3936
l1 1/3 13107 0
1312
h2 1/3 26214 0
3936
ef 1/3 26214 0
3936
h1 1/3 13107 0
1312
nc 1/3 13107 0
1312
be 1/4 26214 0
528
l2 1/4 26214 0
1312
af 1/4 26214 0
3936
l1 1/4 13107 0
1312
h2 1/4 26214 0
3936
ef 1/4 26214 0
3936
h1 1/4 13107 0
1312
nc 1/4 13107 0
1312
be 1/5 26214 0
528
l2 1/5 26214 0
1312
af 1/5 26214 0
3936
l1 1/5 13107 0
1312
h2 1/5 26214 0
3936
ef 1/5 26214 0
3936
h1 1/5 13107 0
1312
nc 1/5 13107 0
1312
be 1/6 26214 0
528
l2 1/6 26214 0
1312
af 1/6 26214 0
3936
l1 1/6 13107 0
1312
h2 1/6 26214 0
3936
ef 1/6 26214 0
3936
h1 1/6 13107 0
1312
nc 1/6 13107 0
1312
be MCast 26214 0
528
l2 MCast 26214 0
528
af MCast 26214 0
528
l1 MCast 13107 0
528
h2 MCast 26214 0
528
ef MCast 26214 0
528
h1 MCast 13107 0
528
nc MCast 13107 0
528
=============================================================
=============================================================
Network Egress Queues
=============================================================
-------------------------------------------------------------
FC-Maps ID O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
be 1/1/2 26214 0
528
l2 1/1/2 26214 0
1312
af 1/1/2 26214 0
3936
l1 1/1/2 13107 0
1312
h2 1/1/2 26214 0
3936
ef 1/1/2 26214 0
3936
h1 1/1/2 13107 0
1312
nc 1/1/2 13107 0
1312
be 1/1/1:100->interface1 26214 0
528
l2 1/1/1:100->interface1 26214 0
1312
af 1/1/1:100->interface1 26214 0
3936
l1 1/1/1:100->interface1 13107 0
1312
h2 1/1/1:8->test 26214 0
3936
ef 1/1/1:8->test 26214 0
3936
h1 1/1/1:8->test 13107 0
1312
nc 1/1/1:8->test 13107 0
1312
=============================================================
*A:ALU-1#
The following output is an example of buffer pool information on a 32-port T1/E1 ASAP Adapter card that supports an ATM N > 1 SAP aggregation group. The buffer size used by the adapter card is 2304 bytes, and the naming convention used at the access ingress queue identifies a SAP aggregation group for an N > 1 ATM pseudowire. Table: Buffer Pool Field Descriptions describes the fields.
*A:ALU-1# show pools mda 1/1 detail
===============================================================================
Buffer Pool Information
===============================================================================
Pool Total : 16520 buffers Buffer Size : 2304 bytes
Pool Shared : 10776 buffers Pool Resv : 5744 buffers
Pool Total In Use : 489 buffers
Pool Exhaustion Drop : 0
===============================================================================
===============================================================
Access Ingress Queues
===============================================================
---------------------------------------------------------------
Name FC-Maps O.MBS(buf) Depth(buf)
O.CBS(buf)
---------------------------------------------------------------
10->SAG1->1
be l2 af l1 434 434
h2 ef h1 nc 8
===============================================================
===============================================================
Access Egress Queues
===============================================================
---------------------------------------------------------------
Name FC-Maps O.MBS(buf) Depth(buf)
O.CBS(buf)
---------------------------------------------------------------
10->1/1/1.1:0/32->1
be l2 af l1 78 2
h2 ef h1 nc 8
10->1/1/2.1:0/33->1
be l2 af l1 78 1
h2 ef h1 nc 8
10->bundle-ima-1/1.1:0/34->1
be l2 af l1 78 1
h2 ef h1 nc 8
===============================================================
=============================================================
Network Ingress Queues
=============================================================
-------------------------------------------------------------
FC-Maps Dest O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
No Match Found
=============================================================
=============================================================
Network Egress Queues
=============================================================
-------------------------------------------------------------
FC-Maps ID O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
No Match Found
=============================================================
*A:ALU-1#
The following output is an example of showing both ingress and egress buffer pool information on a 10-port 1GigE/1-port 10GigE X-Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
*A:ALU-1# show pools mda 1/X2
===============================================================================
===============================================================================
Ingress Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 228975 buffers Pool Resv : 295312 buffers
Pool Total In Use : 55 buffers
Pool Exhaustion Drop : 0
===============================================================================
===============================================================================
Egress Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 505415 buffers Pool Resv : 18872 buffers
Pool Total In Use : 6 buffers
Pool Exhaustion Drop : 0
===============================================================================
*A:ALU-1#
The following output is an example of showing only summary egress buffer pool information on a 10-port 1GigE/1-port 10GigE X-Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
*A:ALU-1# show pools mda 1/X2 egress
===============================================================================
Egress Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 505415 buffers Pool Resv : 18872 buffers
Pool Total In Use : 6 buffers
Pool Exhaustion Drop : 0
===============================================================================
The following output is an example of showing only detailed egress buffer pool information on a 10-port 1GigE/1-port 10GigE X-Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
*A:ALU-1# show pools mda 1/X2 egress detail
===============================================================================
Egress Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 505415 buffers Pool Resv : 18872 buffers
Pool Total In Use : 6 buffers
Pool Exhaustion Drop : 0
===============================================================================
===============================================================
Access Egress Queues
===============================================================
---------------------------------------------------------------
Name FC-Maps O.MBS(buf) Depth(buf)
O.CBS(buf)
---------------------------------------------------------------
No Match Found
===============================================================
=============================================================
Network Egress Queues
=============================================================
-------------------------------------------------------------
FC-Maps ID O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
be 1/X2/1 26214 0
528
l2 1/X2/1 26214 0
1312
af 1/X2/1 26214 0
3936
l1 1/X2/1 13107 0
1312
h2 1/X2/1 26214 0
3936
ef 1/X2/1 26214 0
3936
h1 1/X2/1 13107 0
1312
nc 1/X2/1 13107 0
1312
=============================================================
============================================================
IPV4 GRE Fragment Reassembly Queue Groups
============================================================
------------------------------------------------------------
FC-Maps ID Profile ID O.MBS(buf) Depth(buf)
O.CBS(buf)
------------------------------------------------------------
be 1 26214 0
528
l2 1 26214 0
1312
af 1 26214 0
3936
l1 1 13107 0
1312
h2 1 26214 0
3936
ef 1 26214 0
3936
h1 1 13107 0
1312
nc 1 13107 0
1312
....
be 2 6214 0
528
l2 2 6214 0
312
....
============================================================
The following output is an example of showing only summary ingress buffer pool information on a 10-port 1GigE/1-port 10GigE X-Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
*A:ALU-1# show pools mda 1/X2 ingress
===============================================================================
Ingress Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 228975 buffers Pool Resv : 295312 buffers
Pool Total In Use : 55 buffers
Pool Exhaustion Drop : 0
===============================================================================
*A:ALU-1#
The following output is an example of showing only detailed ingress buffer pool information on a 10-port 1GigE/1-port 10GigE X-Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
A:ALU-1# show pools mda 1/X2 ingress detail
===============================================================================
Ingress Buffer Pool Information
===============================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 228975 buffers Pool Resv : 295312 buffers
Pool Total In Use : 55 buffers
Pool Exhaustion Drop : 0
===============================================================================
===============================================================
Access Ingress Queues
===============================================================
---------------------------------------------------------------
Name FC-Maps O.MBS(buf) Depth(buf)
O.CBS(buf)
---------------------------------------------------------------
No Match Found
===============================================================
=============================================================
Network Ingress Queues
=============================================================
-------------------------------------------------------------
FC-Maps Dest O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
be 1/1 26214 0
528
l2 1/1 26214 0
1312
af 1/1 26214 0
3936
l1 1/1 13107 0
1312
h2 1/1 26214 0
3936
ef 1/1 26214 0
3936
h1 1/1 13107 0
1312
nc 1/1 13107 0
1312
be 1/2 26214 0
528
l2 1/2 26214 0
1312
af 1/2 26214 0
3936
l1 1/2 13107 0
1312
h2 1/2 26214 0
3936
ef 1/2 26214 0
3936
h1 1/2 13107 0
1312
nc 1/2 13107 0
1312
be 1/3 26214 0
528
l2 1/3 26214 0
1312
af 1/3 26214 0
3936
l1 1/3 13107 0
1312
h2 1/3 26214 0
3936
ef 1/3 26214 0
3936
h1 1/3 13107 0
1312
nc 1/3 13107 0
1312
be 1/4 26214 0
528
l2 1/4 26214 0
1312
af 1/4 26214 0
3936
l1 1/4 13107 0
1312
h2 1/4 26214 0
3936
ef 1/4 26214 0
3936
h1 1/4 13107 0
1312
nc 1/4 13107 0
1312
be 1/5 26214 0
528
l2 1/5 26214 0
1312
af 1/5 26214 0
3936
l1 1/5 13107 0
1312
h2 1/5 26214 0
3936
ef 1/5 26214 0
3936
h1 1/5 13107 0
1312
nc 1/5 13107 0
1312
be 1/6 26214 0
528
l2 1/6 26214 0
1312
af 1/6 26214 0
3936
l1 1/6 13107 0
1312
h2 1/6 26214 0
3936
ef 1/6 26214 0
3936
h1 1/6 13107 0
1312
nc 1/6 13107 0
1312
be 1/7 26214 0
528
l2 1/7 26214 0
1312
af 1/7 26214 0
3936
l1 1/7 13107 0
1312
h2 1/7 26214 0
3936
ef 1/7 26214 0
3936
h1 1/7 13107 0
1312
nc 1/7 13107 0
1312
be 1/8 26214 0
528
l2 1/8 26214 0
1312
af 1/8 26214 0
3936
l1 1/8 13107 0
1312
h2 1/8 26214 0
3936
ef 1/8 26214 0
3936
h1 1/8 13107 0
1312
nc 1/8 13107 0
1312
be 1/9 26214 0
528
l2 1/9 26214 0
1312
af 1/9 26214 0
3936
l1 1/9 13107 0
1312
h2 1/9 26214 0
3936
ef 1/9 26214 0
3936
h1 1/9 13107 0
1312
nc 1/9 13107 0
1312
be 1/10 26214 0
528
l2 1/10 26214 0
1312
af 1/10 26214 0
3936
l1 1/10 13107 0
1312
h2 1/10 26214 0
3936
ef 1/10 26214 0
3936
h1 1/10 13107 0
1312
nc 1/10 13107 0
1312
be 1/11 26214 0
528
l2 1/11 26214 0
1312
af 1/11 26214 0
3936
l1 1/11 13107 0
1312
h2 1/11 26214 0
3936
ef 1/11 26214 0
3936
h1 1/11 13107 0
1312
nc 1/11 13107 0
1312
be 1/12 26214 0
528
l2 1/12 26214 0
1312
af 1/12 26214 0
3936
l1 1/12 13107 0
1312
h2 1/12 26214 0
3936
ef 1/12 26214 0
3936
h1 1/12 13107 0
1312
nc 1/12 13107 0
1312
be 1/X1 26214 0
528
l2 1/X1 26214 0
1312
af 1/X1 26214 0
3936
l1 1/X1 13107 0
1312
h2 1/X1 26214 0
3936
ef 1/X1 26214 0
3936
h1 1/X1 13107 0
1312
nc 1/X1 13107 0
1312
be 1/X2 26214 0
528
l2 1/X2 26214 0
1312
af 1/X2 26214 0
3936
l1 1/X2 13107 0
1312
h2 1/X2 26214 0
3936
ef 1/X2 26214 0
3936
h1 1/X2 13107 0
1312
nc 1/X2 13107 0
1312
be 1/X3 26214 0
528
l2 1/X3 26214 0
1312
af 1/X3 26214 0
3936
l1 1/X3 13107 0
1312
h2 1/X3 26214 0
3936
ef 1/X3 26214 0
3936
h1 1/X3 13107 0
1312
nc 1/X3 13107 0
1312
be 1/X4 26214 0
528
l2 1/X4 26214 0
1312
af 1/X4 26214 0
3936
l1 1/X4 13107 0
1312
h2 1/X4 26214 0
3936
ef 1/X4 26214 0
3936
h1 1/X4 13107 0
1312
nc 1/X4 13107 0
1312
be MCast 26214 0
528
l2 MCast 26214 0
528
af MCast 26214 0
528
l1 MCast 13107 0
528
h2 MCast 26214 0
528
ef MCast 26214 0
528
h1 MCast 13107 0
528
nc MCast 13107 0
528
=============================================================
============================================================
IPV4 GRE Fragment Reassembly Queue Groups
============================================================
------------------------------------------------------------
FC-Maps ID Profile ID O.MBS(buf) Depth(buf)
O.CBS(buf)
------------------------------------------------------------
be 1 26214 0
528
l2 1 26214 0
1312
af 1 26214 0
3936
l1 1 13107 0
1312
h2 1 26214 0
3936
ef 1 26214 0
3936
h1 1 13107 0
1312
nc 1 13107 0
1312
....
be 2 6214 0
528
l2 2 6214 0
312
....
============================================================
*A:ALU-1#
The following output is an example of showing both v-port and ring buffer pool information on a 2-port 10GigE (Ethernet) Adapter card. Table: Buffer Pool Field Descriptions describes the fields.
========================================================================
V-Port Buffer Pool Information
========================================================================
Pool Total : 524287 buffers Buffer Size : 512 bytes
Pool Shared : 206119 buffers Pool Resv : 318168 buffers
Pool Total In Use : 146 buffers
Pool Exhaustion Drop : 0
========================================================================
========================================================================
Ring Buffer Pool Information
========================================================================
Pool Total : 262143 buffers Buffer Size : 768 bytes
Pool Shared : 233663 buffers Pool Resv : 28480 buffers
Pool Total In Use : 0 buffers
Pool Exhaustion Drop : 0
========================================================================
=============================================================
Network Ingress Queues
=============================================================
-------------------------------------------------------------
FC-Maps Dest O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
No Match Found
=============================================================
=============================================================
Network Egress Queues
=============================================================
-------------------------------------------------------------
FC-Maps ID O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
be 1/3/v-port 26214 0
528
l2 1/3/v-port 26214 0
1312
af 1/3/v-port 26214 0
3936
l1 1/3/v-port 13107 0
1312
h2 1/3/v-port 26214 0
3936
ef 1/3/v-port 26214 0
3936
h1 1/3/v-port 13107 0
1312
nc 1/3/v-port 13107 0
1312
=============================================================
=============================================================
Network Ring Add-drop Port Queues
=============================================================
-------------------------------------------------------------
Queue ID O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
1 13107 0
262
2 13107 0
655
3 13107 0
1966
4 6553 0
655
5 13107 0
1966
6 13107 0
1966
7 6553 0
655
8 6553 0
655
=============================================================
=============================================================
Network Ring Port Egress Queues
=============================================================
-------------------------------------------------------------
Queue ID O.MBS(buf) Depth(buf)
O.CBS(buf)
-------------------------------------------------------------
1 1/3/1 13107 0
262
2 1/3/1 13107 0
655
3 1/3/1 13107 0
1966
4 1/3/1 6553 0
655
5 1/3/1 13107 0
1966
6 1/3/1 13107 0
1966
7 1/3/1 6553 0
655
8 1/3/1 6553 0
655
1 1/3/2 13107 0
262
2 1/3/2 13107 0
655
3 1/3/2 13107 0
1966
4 1/3/2 6553 0
655
5 1/3/2 13107 0
1966
6 1/3/2 13107 0
1966
7 1/3/2 6553 0
655
8 1/3/2 6553 0
655
=============================================================
|
Label |
Description |
|---|---|
|
Buffer Pool Information (not applicable for the 10-port 1GigE/1-port 10GigE X-Adapter card) |
|
|
Ingress Buffer Pool Information (applies only to the 10-port 1GigE/1-port 10GigE X-Adapter card) |
|
|
Egress Buffer Pool Information (applies only to the 10-port 1GigE/1-port 10GigE X-Adapter card) |
|
|
V-Port Buffer Pool Information (applies only to the 2-port 10GigE (Ethernet) Adapter card and 2-port 10GigE (Ethernet) module) |
|
|
Ring Buffer Pool Information (applies only to the 2-port 10GigE (Ethernet) Adapter card and 2-port 10GigE (Ethernet) module) |
|
|
Pool Total |
The total number of available buffers |
|
Pool Shared |
The number of buffers that can be shared |
|
Pool Total In Use |
The total number of buffers in use, in real time |
|
Pool Exhaustion Drop |
The number of packets dropped due to pool exhaustion |
|
Buffer Size |
The buffer size supported by the adapter card: 512 or 2304 bytes |
|
Pool Resv |
The number of packets reserved or committed |
|
Access Ingress Queues Access Egress Queues |
|
|
Name |
For access ingress queues associated with N > 1 Apipes, the format of the queue identifier is: Service-Id->Sap Aggregation Group Name->Queue Number All other queues use the following: Service-Id->Sap-Id->Queue Number |
|
FC-Maps |
The forwarding class-to-queue mappings |
|
O.MBS (buf) |
The maximum operational buffers in the queue |
|
O.CBS (buf) |
The committed operational buffers in the queue |
|
Depth (buf) |
The queue occupancy (the number of buffer units currently queued), in real time For byte-based WRED, the number of Depth buffers may exceed the number of MBS buffers |
|
Network Ingress Queues |
|
|
FC-Maps |
The forwarding class-to-queue mappings |
|
Dest |
The destination MDA identifier |
|
O.MBS (buf) |
The maximum operational buffers in the queue |
|
O.CBS (buf) |
The committed operational buffers in the queue |
|
Depth (buf) |
The queue occupancy (the number of buffer units currently queued), in real time For byte-based WRED, the number of Depth buffers may exceed the number of MBS buffers |
|
Network Egress Queues |
|
|
FC-Maps ID |
The forwarding class identifier Entries with the port-id:tag->int-name format indicate the use of per-VLAN shapers |
|
O.MBS (buf) |
The maximum operational buffers in the queue |
|
O.CBS (buf) |
The committed operational buffers in the queue |
|
Depth (buf) |
The queue occupancy (the number of buffer units currently queued), in real time For byte-based WRED, the number of Depth buffers may exceed the number of MBS buffers |
|
IPv4 GRE Fragment Reassembly Queue Groups (not applicable for the 2-port 10GigE (Ethernet) Adapter card |
|
|
FC-Maps ID |
The forwarding class identifier |
|
Profile ID |
The IP reassembly profile identifier |
|
O.MBS (buf) |
The maximum operational buffers in the queue |
|
O.CBS (buf) |
The committed operational buffers in the queue |
|
Depth (buf) |
The queue occupancy (the number of buffer units currently queued), in real time |