Table: WLAN interface status describes the operational states that apply to the WLAN interface.
Status |
Description |
|---|---|
AdminDown |
The WLAN port is administratively disabled |
RfAdminDown |
The WLAN radio is administratively disabled |
RfChScanInProgress |
The WLAN radio is scanning frequencies for ACS (Auto-Channel Select) |
NoRadiusPlcy |
WPA2-Enterprise security is enabled but no RADIUS policy is configured. This status applies only to the WLAN AP port. |
Dot1xDisabled |
WPA2-Enterprise security is enabled and dot1x authentication is disabled at the system level. This status applies only to the WLAN AP port. |
RadiusPlcyDisabled |
WP2-Enterprise security is enabled but the configured RADIUS policy is administratively disabled. This status applies only to the WLAN AP port. |
NoAuthRadiusSvr |
WPA2-Enterprise security is enabled but the configured RADIUS policy contains no authorization servers. This status applies only to the WLAN AP port. |
NoRadiusNasIp |
WPA2-Enterprise security is enabled but no NAS IP address is found. The NAS IP address is the address specified in the RADIUS policy. This status applies only to the WLAN AP port. |