1. Getting Started

1.1. About This Guide

This guide describes details pertaining to Triple Play Services Delivery Architecture (TPSDA) support provided by the operating system and presents examples to configure and implement various protocols and services.

This guide is organized into functional chapters and provides concepts and descriptions of the implementation flow, as well as Command Line Interface (CLI) syntax and command usage.

The topics and commands described in this document apply to the:

  1. 7450 ESS
  2. 7750 SR
  3. VSR

Table 1 lists the available chassis types for each SR OS router.

Table 1:   Supported SR OS Router Chassis Types 

7450 ESS

7750 SR

  1. 7450 ESS-7/12 running in standard mode (not mixed-mode)
  1. 7450 ESS-7/12 running in mixed-mode (not standard mode)
  2. 7750 SR-a4/a8
  3. 7750 SR-c4/c12
  4. 7750 SR-1e/2e/3e
  5. 7750 SR-7/12
  6. 7750 SR-12e
  7. 7750 SR-1

For a list of unsupported features by platform and chassis, refer to the SR OS R16.0.Rx Software Release Notes, part number 3HE 14220 000x TQZZA or the VSR Release Notes, part number 3HE 14204 000x TQZZA.

Command outputs shown in this guide are examples only; actual displays may differ depending on supported functionality and user configuration.

Note:

This guide generically covers Release 16.0.R1 content and may contain some content that is released in later maintenance loads. Refer to the SR OS R16.0.Rx Software Release Notes, part number 3HE 14220 000x TQZZA or the VSR Release Notes, part number 3HE 14204 000x TQZZA, for information about features supported in each load of the Release 16.0.R1 software.

1.2. Nokia SR OS Services Configuration Process

Table 2 lists the tasks necessary to configure TPSDA entities. Each section describes a software area and provides CLI syntax and command usage to configure parameters for a functional area.

Table 2:  Configuration Process  

Area

Task

Section  

Triple play services

Provision and deploy services

Deploying and Provisioning Services

Configure triple play services

Configuring Triple Play Services with CLI

Protocol configuration

Configure DHCP

Configuring DHCP with CLI

Configure traffic steering on L2TP LAC

Configuring Traffic Steering on L2TP LAC

PPPoE

Configure point-to-point over Ethernet

Point-to-Point Protocol over Ethernet Management

Security

Configure triple play security

Configuring Triple Play Security with CLI

Multicast

Configure triple play multicast services

Configuring Triple Play Multicast Services with CLI

Enhanced Subscriber management

Configure RADIUS server

Uniform RADIUS Server Configuration

Use scripts dynamic recognition of subscribers

Using Scripts for Dynamic Recognition of Subscribers

Configure IP and IPv6 filter policies for subscriber hosts

Configuring IP and IPv6 Filter Policies for Subscriber Hosts

Configure dual stack lite

Dual Stack Lite

Configure MSAP

MSAP QoS Configuration

Configure web authentication protocol (WPP)

WPP Configurations

Configure IPoE session

Configuration Steps

Troubleshoot ESM

ESM Troubleshooting Show Command

Configure enhanced subscriber management

Configuring Enhanced Subscriber Management with CLI

Deploy oversubscribed multi-chassis redundancy

Deploying Oversubscribed Multi-Chassis Redundancy

Python Scripting

Python Script Support for ESM